SUSE / Novell :: Load Drivers For A Network Card?

Aug 5, 2010

Complete n00b here. I am running openSUSE 11.3 and trying to load drivers for a network card. When I try to make install, I am getting this error:

Code:
Makefile:69: *** Linux kernel source not found in any of these locations:
Makefile:70:
Makefile:71: *** Install the appropriate kernel development package, e.g.
Makefile:72: *** kernel-devel, for building kernel modules and try again.
How do I install the kernel-devel?

View 4 Replies


ADVERTISEMENT

SUSE / Novell :: Apcusbd Service Doesn't Load At Boot Up?

Apr 4, 2010

I just installed the software for my APC UPS on my SUSE 11.2 machine. After some work I finally got it work except I have to go and start it each time I reboot. It is supposed to load automatically, but somehow mine doesn't. If I go to a command prompt as SU and type "apcupsd start" and then go look at the GUI everything shows up fine.

View 2 Replies View Related

SUSE / Novell :: SCSI Drivers - Getting Stuck At No Volume Groups Found

Jul 21, 2009

I made an image of a server(A). It did not work because It did not see /dev/sda. So I used another cd from indentical sever(B), cd which had work. Then mounted the nfs copy the image over. Server(B) had slightly older version of sles. And its not using lvm. But point is it had appropriate driver in the image cd.

Now situation is, This new image copied ever thing over.(I can mount it using LIVE CD). But When I boot up server it wont see vg volume group. I believe scsi driver is missing.After booting from LIVE CD I chroot in root used yast to add initrd modules, qla2xxx, mptbase, mptscsih(other server(B) had those). Still when I reboot it, it get stuck saying

Code:
No volume groups found
unable to find volume group
waitnit fot device /dev/vg1/root
to appear .... not found device nodes:
.....
......
.....
No root device found. exiting to /bin/sh
sh: cant access tty; job control turned off

View 1 Replies View Related

SUSE / Novell :: Change Setting For New Video Card On 11.2?

May 24, 2010

I want to attach disk with Suse 11.2 to another motherboard with Integrated ATI Radeon HD 4290 GPU ( at the moment I am using Nvidia GeForce 6800). How can I change settings for new video chip?

View 4 Replies View Related

SUSE / Novell :: Reconfigure Graphics Card Settings?

May 14, 2010

I was using an nVidia graphics card... but now that its damaged, i am using the on board intel graphics card.

My linux installation was working well with the nVidia card, so how do i reconfigure my system to make it work on the intel onboard card??

I am running openSUSE 11.2...

View 4 Replies View Related

SUSE / Novell :: Intel Builtin LAN Card Not Being Detected In SLES 10 SP2?

Aug 8, 2009

I have installed SLES 10 SP2 but my network card is undetected. Model: Intel(R) 82567V-2 Gigabit Network I have the drivers for linux on my installation cd as:

- e1000-8.0.2.1.tar.gz
- e1000e-0.3.3.3.tar.gz
- igb-1.2.24.tar.gz

How do i install these drivers on linux?

View 4 Replies View Related

SUSE / Novell :: Open - 11.1 Does Not Recognize My Broadcom Wireless Card

Feb 12, 2010

I am running openSuse 11.1 64 bit on my hp pavilion dv6458se; and am unable to get my Broadcom wireless card to work.

i tried reading a few forums, but they all start when 'lspci' recognizes the card.

My problem is that 'lspci' does not show any 'Broadcom' card.

I have given below the output of 'lspci' for your reference.

View 4 Replies View Related

SUSE / Novell :: 1-Click Install ATI Driver For ATI X1950 Video Card Corrupts - 11.1

May 23, 2009

I have installed Open Suse 11.1 on two different machines. One contains an ATI X850 video card, and the other contains an ATI X1950 video card. I updated the ATI drivers on the 850 card and it works like a dream. I updated the ATI drivers on the 1950 card and Suse becomes unusable. System works fine before the update. Before the update I ran it at a resolution of 1280 x 1024. I thought I would lower it to 1024 x 768 to see if that would help, but it does not. I dual boot with WinXP, and card works fine with that setup at 1280 x 1024, so I would suspect this is a specific problem with my Suse setup as opposed to a Motherboard issue.

View 4 Replies View Related

SUSE / Novell :: Where Is Video Card Info Listed In 11.3 - Large Icons On Desktop

Aug 10, 2010

I just did an install from opensuse 11.0 to 11.3 using the live web install. After the install, I found that the monitor always reverts to 87hz refresh rate and must be manually adjusted to 60hz. Also, there is no adjustment for the monitor resolution beyond 1024 x 768. I can not find the video card info in yast like it was before. Do I need to add the ati sources in yast? Will that give me a way to adjust the video card properties? Video card is the ati rage. Box is a dell optiplex pentium 3.

View 1 Replies View Related

SUSE / Novell :: Fails To Boot From QLogic Fibre Channel Card - No Root Device Found

Oct 31, 2010

We have a SuSE/SLES 9 server that boots from a fibre channel card, using volumes from a NetApp filer.

We previously had the server booting from the LUNs on the filer, but after some tinkering around with the fibre channel BIOS, we have the situation where the LUNS seem to be mounted, the OS boots, starts to initialise everything but then stalls, saying:

We have tried loads of combinations of settings in the BIOS and fibre channel BIOS without any success or any idea what may have caused the error.

View 4 Replies View Related

Server :: Install Novell SUSE Ver 11 From Different Computer DVD ROM Over Network?

Jun 23, 2010

Need to install Novell SUSE Linux version 11 from Different computer DVD ROM over Network.

View 1 Replies View Related

SUSE / Novell :: 11.2 - WiFi Network Settings On HP2133

May 21, 2010

I have just carried out a complete installation on my HP 2133 mini notebook. It was preloaded with suse 10.1 and the first time I connected it to my BT HomeHub2 was with the network icon on my home screen. Since switching to suse 11.2 when I click the same icon all I get is a setup screen with what seems like millions of setup fields that I do not understand? I have never worked with linux before so do not want to guess the settings. I have looked at google search for the answer but every page seems to be for computer programmers or I am just being dull. I can connect the ethernet cable and it works fine, but I cannot even find a network.

View 5 Replies View Related

SUSE / Novell :: OpenSUSE Connects To Wireless Network But Not Internet?

Mar 9, 2010

In openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.

Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)

View 5 Replies View Related

SUSE / Novell :: How To Switch Network Manager From YAST Back To Efault Network Manager?

Mar 2, 2010

I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.

View 7 Replies View Related

OpenSUSE Network :: Suse 10.2 Network Card ( DG41RQ ) Configuration?

Jun 19, 2010

i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.

View 4 Replies View Related

SUSE :: How To Network Load Balancing Cluster

Jan 2, 2010

I have 2 openSuse 11.1 servers. both of this servers serve a static web site. i want to Build A Network Load Balancing Cluster? how i can do this?

View 3 Replies View Related

SUSE / Novell :: Open Suse 11.2 Install Grub Entry For Chainloading Ubuntu?

Jul 20, 2010

I intend to re-install open suse 11.2, 32-bit. On a previous install,suse did not provide a grub entry for ubuntu.My current setup has

ubuntu/root on /dev/sda6
ubuntu/home on /dev/sda7
ubuntu/usr/local on /dev/sda8

[code]...

View 4 Replies View Related

SUSE / Novell :: Multimedia CD-Rom Made For Windows 95/98/98 SE And 2000 Are Usable With Suse?

Nov 18, 2010

I've got several language multimedia CD-Rom's, made for Windows 95/98/98 SE and 2000, that I'm using by means of my daughter's old PC (Win 98 SE O.S.). However I noticed, also, that you can perfectly use them even with Windows Vista. What I'd like to know is if you can use them even with Suse/Novell and (why not?) OpenSuse Linux.

View 4 Replies View Related

SUSE / Novell :: Open SUSE 11.1 Mount Samba Share At Boot???

Jul 5, 2009

OK... I tried everything i could think of... but i still cannot get my Open SUSE 11.1 to mount my samba share at boot! I still don't understand the 11.1 boot sequence. can NE one help me... tell me what files to give you output from... Ty guys P.S. My shares originate from a Windows Server 2003 RC2 machine, and it's dns server doesn't work correctly... so my mount command is

mount -t //192.168.x.x/files/ /nET/ -o username=linux,password=xxxxxx
please let me know what other info you need... I don't have the internet, so it will be tommorow b4 i see this again!!! Thanks

View 2 Replies View Related

SUSE / Novell :: Unable To Create Home Directory In Open Suse 11.3

Sep 8, 2010

When i am adding a user using "useradd -d /home/test test" or "useradd test", it is now creating the home directory, whereas when i am using the graphical mode and going through several menu options, i am getting the home directory.

View 1 Replies View Related

SUSE / Novell :: Ss "server Unexpectedly Closed Network Connection"?

Jan 15, 2010

I'm remotely connecting to SUSE 10 system using OpenSSH_4.2p1 from PUTTY. My problem is that my session to the server was getting disconnected after some time. when i'm giving "exit" command, it is giving the message "server unexpectedly closednetworkconnection".Also it is showing my last login wrongly. what went wrong from sshd side i dont know

View 7 Replies View Related

SUSE / Novell :: Install A D-Link Access Point On Suse 11.0?

Sep 16, 2010

how to install a D-Link Access Point on Suse 11.0 or steer me toward documentation that will do that? I configured the device on XP following instruction from this forum and the AP configured perfectly.The AP is plugged directly into the network port on the computer. It *should* function correctly without a router. I tried a restart and Suse has no idea it's there. The computer is currently configured for a wired connection which needs to be changed. The computer itself is going to be used as a small home storage server.

View 3 Replies View Related

SUSE / Novell :: Monitor Turns Off After Few Minutes And Reboot - SUSE 11.3 KDE 4.5?

Nov 4, 2010

I have a disturbing problem with my monitor which goes to sleep (or ??) after few minutes if my comp is not used and most of the time I have to restart my comp.I disabled everything in Powersave , but nothing. I did have that problem in previous versions of SUSE, but somehow, I solved that. I cant remember what I did then.

View 4 Replies View Related

SUSE / Novell :: Can't Get Suse To Install On The Prepared 20gb Partition?

Aug 23, 2010

I've pre-partitioned my HDD and want to install 11.2 on the second primary partition.However, when using the installer, I can't get Suse to install on the prepared 20gb partition - it keeps insisting it wants to install on the large unallocated section of the drive.

I find the partitioner somewhat hard to use and the answer may be staring me in the face but I can't see it.

View 2 Replies View Related

SUSE / Novell :: Cannot Install Python On Open Suse 11.2 586?

Feb 1, 2010

I tried to use different version of Python, and followed the Readme like this

./configure
make
make test

[code]...

View 3 Replies View Related

SUSE / Novell :: Error On Suse 11.2 Online Update?

Oct 13, 2010

PackageKit Error repo-not-available: File '/repodata/repomd.xml' not found on medium 'http://download.opensuse.org/repositories/KDE:/KDE4:/Community/openSUSE_11.2/' My 11.2 won't update and gives this error. Anyone know how to fix it?

View 2 Replies View Related

SUSE / Novell :: K3B Icon Missing In Panel - Suse 11.3

Jul 19, 2010

New Suse 11.3 installation with Gnome desktop. Added K3B using Yast2, and after completing the install of K3B, there is no icon for K3B! Instead there is an "X" and the text for K3B in it.From the main menu -> more applications -> multimedia, is where the K3B icon is.Yast2 is supposed to install any dependencies needed or warn if it can not find any missing dependencies. What is missing, or is it a permission problem? All the other application icons seem fine.

View 4 Replies View Related

SUSE / Novell :: Cannot Find Libtk8.4.so For Suse 11.2

Feb 4, 2010

The software use to work well here, but now I got this when I try to run it

sparky: error while loading shared libraries: libtk8.4.so: cannot open shared object file: No such file or directory

But I can not find it.

I also tried

cd /usr/lib
ln -s libtk8.4.so libtk.so.0
ln -s libtcl8.4.so libtcl.so.0

but this does not work neither.

View 4 Replies View Related

Ubuntu Networking :: Can't Load The Drivers For Tp-link Tf3200 Network Adapter

Feb 26, 2011

I have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.

pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver
pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all
sudo: unable to resolve host paghomelinux

[code]....

View 9 Replies View Related

SUSE :: Unable To Configure Network Card ?

Sep 24, 2010

We have several new DELL STUDIO-XPS machines pre-packaged with Win7 onto which we intend to load 10.3 the 2.6.22.5-31-default kernel as a dual boot.

The first test machine however is showing reluctance to reveal its NIC under SuSE. The card in question is a Broadcom Netlink (TM) Gigabit Ethernet with driver version 12.4.0.3 under Windows.

The error message I recieve under SuSE is "Unable to configure network card because kernel device is not present".

ifconfig confirms this showing only the loopback device.

The tg3.ko driver seems to be OK (although I am not sure how to interogate this file for its vesion?). It is listed under /sbin/lsmod and I have attempted a rmmod followed by an insmod but thsi seems to have no effect.

Talk on the net suggests Windows will not 'let go' of the card on a dual boot machine but this seems unlikely and I have attempted the various power down options without success.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved