I just installed SUSE in a VMware to test it out. A problem i've had with VMware before was getting the wireless to work. I was wondering if anyone knows a way to get the wireless to work over the VMware and in SUSE. I know this may not particularly be a SUSE question but all I saw in the VMware forums was one response that said it was not possible.
View 1 RepliesWireless card detected but cannot connect to a wireless network
I have install it suse 11, and everything went well until the wireless thing is not working, my card is Broadcom BCM4318, I see my card on the network settings but I cannot configure the card, and also I cannot connect to a wireless network, can someone tell me what to do here, I am loosing my patient....
I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedI'm running OpenSuse 11.4 with kernel (2.6.37.1-1.2-desktop i686) and KDE 4.6.00 "release 6".When I first installed the system the KNetworkManager found my wireless network. After entering my details it suddenly couldn't find it any more and hasn't found it since (even after re-install). My network is definitely working. I did try and set it up with ifup but it still couldn't find any network. Unfortunately I don't know anything about networks even less about wireless ones. Many thanks in advance.
View 9 Replies View RelatedOne of biggest reason I need to use windows is because my company uses Juniper SSL VPN to remote desktop into our company's computer. Our company doesn't allow any native linux/windows app client, only the web SSL VPN is enabled.
Looks like this Juniper SSL VPN only works on windows computers. It makes the windows remote desktop client connect over the SSL web VPN from browser. Of course, linux/SUSE doesn't have the windows desktop client. Is there any way to get RDP work through the given SSL VPN? Otherwise, I guess I need go back install windows and starting using it again.
anyone knows how to sure files between two suse's connected to ad hoc wireless linux
View 3 Replies View RelatedI installed OpenSUSE11.4 yesterday.The dual boot option works.The wireless works in win 7 but I cannot get it enabled in SUSE.Is there a reason why the keyboard keys will not work to enable the wireless.I have an acer laptop.
View 3 Replies View RelatedIn openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
I bought the wireless PCI network card WMP600N from Linksys. I tried to connect with my router, but no success. The correct driver is installed(RT2800), the necessary package WPA_supplement is also installed. My providers settings are WPA-PSK with a shared key. Key encryption is TKIP. I can't choose TKIP in the Yast network menu. so i chose passphrase.
the weird thing is that the wifimanager says WEP is on but it's not, at least not in my router and i did not setup WEP to. see picture 6. i had to use manual boot "ifup wlan0" because when i use boot at startup the whole systeem freezes. anyway, when i use ifup wlan0 as root in the konsole, the system also freezes. i have explained it clearly, please take a look a the pictures.
step1
step2
step3
step4 After pressing enter the system freezes.
I cannot seem to get VMWARE workstation to run on SUSE 11.3. I am getting the following error message: /usr/lib/vmware/bin/vmware-modconfig: symbol lookup error: /usr/lib/gio/modules/libdconfsettings.so: undefined symbol: g_settings_backend_get_type
This is happening with version 6.5 as well as 7.1
I can't seem to get my wireless to work.
The light on my laptop that says my wireless card is on, is on.
I''m really liking openSUSE, i dont want to go back to ubuntu :c
Runing VMware Workstation 7.0.1-227600.i386.bundle in SUSE 11.4 post me an instruction installation for this. I have been trying so many tutorials and other numerous methods to sort this thing out. I'm so frustrated. And I'm totally a newbie to linux.
View 4 Replies View Relatedhow do i configure wireless usb adapter to work with backtrack 4 on vmware
View 2 Replies View Relatedi installed suse (KDE) on my old notebook and now I'm trying to get the wlan to connect to our router and can't figure out how to get it to work. My card seems to work, the network manager even finds the router, but i just cant get a connection. I followed the steps of the "Getting Your Wireless to Work" thread and these are the results:
[Code]....
- i messed around a bit with the network settings and might have cluelessly broken something (or broken it more)
- i tried a usb-wlan-card as an alternative, which didn't work either, but could possibly have messed things up even more.
I recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X
PEAP
blank anonymous identity
no CA cert (I suspect this might be the problem)
PEAP v 1
MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
I created a VMware Workstation VM with OpenSUSE 11.2. When I copy the VM to a new location the network configuration disappears. If I go into the networking control panel and save, the interface names are changed. Originally had 2 nics as "eth0" and "eth1", copy the vm, configure network and the interfaces are now "eth2" and "eth3". How do I get back to my original configuration?
View 7 Replies View RelatedI have a Toshiba Satellite L550 laptop with Suse 11.3 dual booting with Windows 7. Windows can detect the built in wireless card but not Suse, what can I do to get the wireless recognized in Suse.
View 2 Replies View RelatedWhen i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedI have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies View RelatedI mistakenly delete my default panel. How to add the network notifier? Tried to look for the widget but nothing? i need to choose my network connections. And when i look at the Network manager my wireless if black ? It means it didn't detected my wireless?
View 8 Replies View RelatedI just installed suse on this computer, and am wanting to allow other computers to store files on it as a file server. I was reading the online manual and in the personal file preferences, it shows an option to enable 'share public files over network'. The problem is I don't see that option when I open up file preferences. All I see is an option to allow sharing using bluetooth, nothing about sharing over the network. When I look in the network I can see the computer running suse, but when I try to connect to it, it says 'unable to mount drive: connection refused by server.'
View 3 Replies View RelatedI am using vmware player 3.1.3 and mounted in it an .iso of OpenSuse 11.3. Everything works fine, except the internet connection. For example, when I try to go to a website with firefox the page never displays. What do I have to do, so that the internet works?
View 1 Replies View Relatedinstalled opensuse 11.3 on a Dell laptop.NetworkManager and Ndiswrapper, allready instaled(last updated versions), but suse can not detect or see any wireless lans.
Can anybody help?
New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
I am attempting to setup a linux file server in active directory. It has been kind of an ongoing project(nightmare) for me... I have tried a few distributions of linux and I have to say I really enjoy openSUSE. YaST is my best friend. Now to the problem at hand.
I have samba installed and configured for the domain. I was able to successfully join the machine to the domain. I can even log on using domain user names and passwords (more than I was able to accomplish with other distros...). Where I am having a problem currently is I cannot see the suse machine from a windows machine. I can access shares from suse to windows though.
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
I just installed (n this 11.2 system) vmware server (v 2.02), to have access to a few small systems. One of them is a 11.1 guest which I just upgraded to 11.3, successfully (almost).
I have a problem, though: from the host I can not ping/ssh the guest.
Guest to host works fine (including names).
Code:
The firewall is down on both sides. I don't see anything with iptraf in the guest. The IP addres of the guest is correct, unless I'm too tired to see.
Why?
Code:
How, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies View RelatedI installed the package "java3d" with yast, and I already have Java_1.6 installed, with the plugin(2 files from YAST). I went online to do a java3d test, and every test site says it is not installed, when it is. Now, where exactly was this supposed to be installed so I can use it under Firefox? Obviously it was installed in the wrong place and Firefox does not see it.
Current java3d installation directory>>>>/usr/share/java