Debian Hardware :: Network Card Doesn't Turn On Linux Mint - Failed Configuration
Nov 24, 2014
My card Wifi network doesn't turn on, even at loading configuration of the system is failed. I have to wait a long time until the system itself to load.
And when I write ifconfig or iwconfig is displayed in the console interface wireless card.
And when I come in the panel on the network card, it immediately pops up a window that you can not load the network card modules.
I don't know what could have happened, I do not recall that I recently messed with the system.
Here are the pictures: [URL]....
And here I join dmesg.log file, at the end of a failed: [URL] ....
I have linux mint 17 quiana cinnamon
View 4 Replies
ADVERTISEMENT
Mar 19, 2011
I've got problem with my computer, any graphic card working under AGP port and any Linux based system.When I start my system with my graphic card in port AGP, the kernel panic appears.I tested on Linux: Ubuntu, Debian (few version from 7.10 to 9.10), Mint, OpenSUSE 10.3, 11.0), DSL. Always has been crash with kernel panic. Both live versions and installed tested.Working fine only on Linux Slitaz.I tested on GeForce4, GeForce2 and some old GPU from ATI. Computer works fine on built-in GPU Intel Extreme Graphics 2. Everything is fine under MS Windows. No problems. But I don't want to use Windows.
View 3 Replies
View Related
Aug 27, 2015
Built a machine w/ i5-4440 & gtx 960. I installed xserver-xorg-video-intel & xserver-xorg-video-nouveau. Xorg -configure fails, so I added xorg.conf I found online, makes no difference. xrandr can't open display. startx of course fails.
Backstory: My plan was to dual boot sid + stable as fallback with shared partition. First installed stable and whether connected to mobo or gfx card, I couldn't get login on tty, it would just hang on errors. So I installed sid (this time using lvm to hopefully make partitioning easier) and while I get the "failed to load nouveau" errors on mobo, gfx card gives me a login screen.
uname -a
Code: Select allLinux 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64 GNU/Linux
lspci | grep VGA
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
[Code] .....
View 1 Replies
View Related
Jan 11, 2016
I ran my daily update of Debian Stretch using Synaptic, and when done had an un-installed update for ifupdown remaining marked in the list. By right clicking I was able to get Synaptic to say it would install the update, along with quite a few other updates. In the process of doing this, my screen went dark and stayed dark. On reboot, I get the Grub menu to select which Linux system I want to boot, but whichever one I choose, including older ones, I get to a command line, not the Gnome GUI.
I tried to complete the update of ifupdown using apt-get, only to discover that my machine no longer has any network connection, let alone Internet.
How do I begin to troubleshoot this?
View 14 Replies
View Related
Feb 1, 2010
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
View 4 Replies
View Related
Jun 3, 2010
I need to set up a little virtual network with Debian Lenny guests (the host is Debian Squeeze, but I don't think it matters). I installed Lenny in a VM and it works fine. Then I cloned the hard drive, garion@Laptop:~$ VBoxManage clonevdi Linux 1.vdi Linux 2.vdi created a new VM with exactly the same settings as the first one and booted the new disc. The problem is that there's no eth0 in the new VM, but it is in the original one. Also if I "unplug" the cable, dmesg won't notice anything. In the original VM it works fine. They both have the same virtual network card: PCnet-FAST III (Am79C973). I've also tried NAT as well as internal network settings.
View 2 Replies
View Related
Dec 9, 2010
I'm running squeeze testing. I have noticed an issue with the way NetworkManager acts when the wireless connection is dropped. I believe it should automatically reconnect but it immediately puts up a dialog requesting me to enter the wifi password. This dialog stays indefinitely until I intervene and click "OK" (the password from the previous successful connection is still there). I would think that something as basic as wireless networking should not require 24 hour human interaction to stay connected. I have considered a cron job checking the network status and restarting it if necessary, but there is a configuration change or something else I can do to resolve this.
View 3 Replies
View Related
May 6, 2011
Alright so i have two drivers installed for my network wireless card and the damn thing still dont work. What do i do ? does anyone have any suggestions.is there a special way to turn my network wireless card on? i mean i see it but its just not turning on and scanning
View 5 Replies
View Related
Feb 15, 2011
I am very much new to Debian. To have a feel and check if my laptop (HP Elitebook 6930p) is supported I decided to use a live USB option. I know how to create a live USB disk using Ubuntu and using the same knowledge I created the USB disk and tried to boot using it. The system starts to boots off the USB drive and then is stuck at a point where it fails to identify my HDD. Here is what I did
a) downloaded the debian-live-508-i386-gnome-desktop.iso/debian-live-508-i386-gnome-desktop.img/debian-live-507-i386.iso (I tried with all 3)
b) created a live USB using unetbootin
c) tried to boot from live environment
My laptop's hard drive is encrypted using SafeBoot.
After all the 3 debian images failed to boot I tried with other Linux flavors such as Mint and Ubuntu. Interestingly Mint and Ubuntu boot. Is there some thing I need to take care of?
View 3 Replies
View Related
Jan 20, 2011
I need to test network card throughput and speed between two computers, one is running Fedora and other running Windows 7. Usually I would use netperf to perform this task, however I can't find Windows build of netperf. Can anyone recommend any network evaluation tool, similar to netperf (clien/server) which has both Windows and Linux versions.
View 2 Replies
View Related
Sep 17, 2010
I am wondering if it is possible turn off my display with a key of my laptop's keyboard. I mean if I press ctrl + o then my display turn off and then if I press ctrl + o my display turn on.
View 5 Replies
View Related
Jun 19, 2015
I cannot see my debian linux machine in my virgin media router>>attached devices. I can see everything else including my raspberry pi.
The box is headless but I connected up to tv temporary and did ifconfig and got the ip address. I can ssh to it and connect to minecraft server I have running on it but I would like to know why I cannot see it in the router.
View 4 Replies
View Related
May 25, 2010
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
May 12, 2010
My system goes through slow periods where it just crawls and others where it's fine, but I'm wondering which service settings are OK to just shut off to give me a bit more oomph when I boot up.The others I'm pretty OK with like spam assassin, dictionary server and so on, but some of the others i wonder if they only serve to slow things down..Also..I live in a very dusty environment and I KNOW the fans and other parts get caked with dust and it wouldn't surprise me if the dust got so bad it just stops the fans completely so once in a while I use my air compressor to blow the crud out and I usually get covered myself, but how safe is using the compressor? It's not the type that typically fills up with condensed water droplets so that isn't a super critical issue..It's a small 1 hp deal, elect drive and so on.. Safe enough? It's all I have and/or can afford..
View 1 Replies
View Related
Dec 31, 2010
Is there a command line tool to shut off/spin down the hard disk either when not in use or when something is typed into the console? I'm trying to save power in a laptop I have..
View 2 Replies
View Related
Jun 19, 2010
i am using intel hardware on this working on suse linux 10.2 . i am not able to configure the network card IP address I have tryed using dhcp and static both way. Currently intel DG41RQ network card is assembled in my system. by using command ifconfig i can see only lo but eth0 is not displayed their.
View 4 Replies
View Related
Dec 23, 2015
I have Debian 8 with VBoxGuestAdditions (4.3.18). I can connect to this box from Win7 using RDP (mstsc.exe). When I connect from Windows 10 using mstsc.exe I've got error code 2308. I tried NoMachine, 2XClient, RoyalTS none worked.
W10 connecting with RDP to Linux server? If I would install xrdp onto the Linux server would it work for me?
Is it possible to connect from Win10 to Linux using RDP?
View 4 Replies
View Related
Oct 19, 2014
I've installed Debian Wheezy on my HP G62 notebook. In windows the touchpad worked well with all features. But now I can't turn the touchpad on/off by tapping on the LED, which doesn't shines. Also I can't use the double click feature.
View 1 Replies
View Related
Jul 1, 2015
When I watch any video on YouTube my screen will turn off (no HDMI connection) and then it will turn on after a couple seconds (10 -40 seconds). When I played Borderlands 2 the screen is completely fine.
View 10 Replies
View Related
Dec 24, 2015
on my dual HD5500/GT940M. I can not turn on Nvidia. just install bumblebee and got the error "unknown header type 7f" if I remove bumblebee, Nvidia 340 loaded but system run on HD5500, no way to use Primus or to switch to 2nd card.
View 0 Replies
View Related
Aug 8, 2015
I have a laptop connected to internet via wlan0. I also have eth0 interface and with it I share internet. I want to modify/filter all the traffic passing by the first laptop, something like this:
Code: Select all          *---------------------------*
          |    LAPTOP 1      |   *--------------* ?
          |-----*  *------*  *----*   |       |
  INTERNET<------>|wlan0|<-->|MY_APP|<-->|eth0|<---->|ANOTHER LAPTOP|
          |-----*  *------*  *----|   |       |
          *---------------------------*   *--------------*
I know that in FreeBSD it is possible to use ipfw for that purpose, because it build-in into kernel. We set for example rule Code: Select allipfw add divert 2000 ip from any to 1.0.1.1
and we can use our own application to process those packets, reinject them forward etc. It will work also fast, because as I said, it build into kernel.
Is there any standart Linux-based solution to do the same? I found some info about netmap-ipfw. Is this a correct solution? Or I have to use for example IP-aliases and iptables to do that?
I need to process all the IP-packets, not only TCP/UDP/etc-protocol. Solution also must be very fast.
View 0 Replies
View Related
Jan 5, 2016
After hours of struggles I'm still not able to configure a simple backup from a Debian Jessie server to a Planet branded NAS.
Configuration is as follows:
NAS
user name: user
pass: user12
share name: user. Inside that directory, there is bkp directory where stuff should go. bkp was created using Dolphin.
The NAS offers smb service and is accessible through Dolphin file manager and from Windows stations.
Server also has a user named "user" and a password "1"..
Fstab looks like this:
//192.168.2.3/user /mnt/NAS cifs username=user,password=user12,iocharset=utf8 0 0
The command is: Code: Select allrsync -ahv /home/user/Desktop/ /mnt/NAS/bkp/
Errors are: Code: Select allrsync: chgrp "/mnt/NAS/bkp/." failed: Operation not permitted (1)
and
Code: Select allrsync: mkstemp "/mnt/NAS/bkp/.teszt.YEmVM3" failed: Operation not permitted (1) where teszt is a file created by me and YEmVM3 seems to be randomly generated character string.
View 0 Replies
View Related
Mar 20, 2016
I have some old linux based games and applications that require old libraries to run.But in the mists of time, I've lost the scripts on how to set up a sandbox environment to run them. Any template for that type of fiddle? I should be able to resource libraries contemporary to the games from my collection of old distros, but my web fu on this matter(jargon) is cracked. It would have to be easier that continually trying to fiddle the MS OS version to run under Wine/PlayOnLinux. I've got Myst II, Civilisation CTP and Railway Tycoon II, although I think the last app I ran was Word Perfect 8.
View 3 Replies
View Related
Sep 25, 2010
Can Ubuntu One be used in Linux Mint or other distros? Also, can the Ubuntu music store be accessed from distros other than Ubuntu?
View 1 Replies
View Related
Jun 8, 2015
I tried to install "Wireless LAN" driver which wasn't installed by default on Debian Wheezy based on this DOC.
After I did all steps in that DOC, I've rebooted the system, and then Debian booted in TTY( gdm didn't start!!!!! )
and the main problem is I can't login to TTY and it say's "Login incorrect"!! (I'm sure the username and password is correct).
Overall :
1- GDM doesn't start
2- I can't login to TTY
View 14 Replies
View Related
Dec 19, 2010
i have fought with this laptop for a long time and im just worndering if somebody could tell me how to clear it off and just re install it and where to download the linux mint from?
View 1 Replies
View Related
Sep 3, 2015
I've a Lenovo G50-80T with W8.1. I want to install Debian 8.1 in dualbooting mode. I've done this other times without problems. But this time I want encrypt the Linux partition (not the Windows partition). I'll use dm-crypt to do that. I want to know if this way is secure for protect the data on Linux partition or if I need encrypt the entire drive.
View 3 Replies
View Related
Mar 22, 2016
Following VMware recommendations on how to change linux I/O scheduler for guests, I'm trying to do it on my VM machine running Debian Wheezy. At the moment I'm running kernel backports:
Code: Select all$ uname -a
Linux brutus2 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u3~bpo70+1 (2016-01-19) x86_64 GNU/Linux
The default I/O scheduler at the moment for device /dev/sda is CFQ, and I can change it on the fly to NOOP:
Code: Select all$ cat /sys/block/sda/queue/scheduler
noop deadline [cfq]
$ echo noop > /sys/block/sda/queue/scheduler
$ cat /sys/block/sda/queue/scheduler
[noop] deadline cfq
[CODE]..
View 1 Replies
View Related
Feb 19, 2010
This is my second day of using Linux Mint and I have bunch of questions. Let's start with this one. I tried to play dvd movie yesterday night. I put disc in drive. And nothing happened. Like it's not in there. So I tried to double click (I'm old Windows user trying to learn new stuff) on cd/dvd disc in computer. It's unresponsive. I try right click run with application some kind of movie player. It says 'Could not open location. You might not have permission to open the file'.So I installed VLC and did the same thing but same message appears.So I look at google for the answer and didn't find much. And I was tired and went to sleep.
Today I wake up, turn on my laptop and surprise, surprise! There is some icon on my desktop saying 'Name of the show' (that was the dvd I was trying to open). So I double click it and there are all episodes. And I can now browse it and play any episode I want. So I say, 'hey, there must be something if I eject this dvd, and put it in again, I would have same problem as last night'. And I have. And problem is back. Now I cant play anything again.
View 13 Replies
View Related
