Hi. I'm running the 64 bit OpenSuse 11.2 distro with Firefox 3.5.7 and the Novell mono plugin installed but still can't watch the olympics coverage on CTV.
Is there something else I also need to install?
Ubuntu users can't watch NBC streamed Olympics coverage?
The CBC [url] seems to be able to get it right (flash player, I believe) for Ubuntu/Linux users. Well, the coverage is better from the CBC anyway.
Let us know if you find a workaround for NBC, I believe its the Silverlight 3.0 issue.
After openSUSE11.3->openSUSE11.4 upgrade Keepass2.14 stopped working. Seems to be problem with mono included in 11.4.
I have a wireless cable modem/router and a PCI-E 1x wireless card in my desktop PC. It works perfectly until I connect my Ethernet cable to my local router and printer, no more internet connection. I am guessing there is a setting somewhere that tells the networking software that the hard wire connection is the primary internet gateway. How do I tell it to use the wireless as the primary gateway?
View 4 Replies View RelatedTrying to install the Novell iprint client but got the following error message:
My system specifications are as follows:
With OpenSUSE 10.3 iPrint was working. I was printing to a Novell iPrint-server and had no problems at all. Now i upgrade til OpenSUSE11.1 and now iPrint does not work at all. I downloaded the lates iPrint Client that was released 13.januar 2009 and tried to install. It claims i miss "libglitz.so.1". I searche for this file in Yast and find Glitz-i586 Installed it and now iPrint Client did install witout any errors. Now i try to install an iPrint-printer that have a Linux-driver attached. Firefox crash everytime i try to install this printer. I tried both as normal user and as root but with same result. I know the normal respons is "Novell doesnt support OpenSUSE but only SLED". I dont like SLED because its not near as good as OpenSUSE. SLED does not support any multimedia and i had several unresolveable problems with it. Novell develop Novell Client for OpenSUSE, so why not iPrint Client?
View 4 Replies View RelatedIn openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
Hardware:
Computer: Yakumo Notebook model 331
Network Card: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
OpenSUSE is starting to drive me a bit nuts. Actually what I'm trying to do is simply install VMWare server on a recent as possible SUSE and run 2 virtual machines, both the same SUSE. Of course 11.2 32 bit doesn't run VMWare server 2 so it's back to 11.1. The trouble is, 11.1 won't install properly on my PC.
The install process, booted and installed from the 11.1 network install iso image on CD, runs fine. The PC reboots from hard disk and stops at the grub prompt. I've tried the auto-repair option and reinstalled it from scratch a second time always with the same results. It seems the root partition is hosed, and that's where my understanding hits its limits. Can anyone help?
Incidentally should anyone be able to advise on the VMWare conundrum I'd also be interested. Maybe in another thread...
I would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies View RelatedI have a system running a very basic LTS install (10.04). Ubuntu has been setup with very little additional packages. No GUI. Once it's booted to a prompt for the first time I add the following packages,
cups cupsys ssh pi memtester nfs-common
aptitude safe-upgrade
At this time I don't have additional information on exactly what packages are installed. I did not perform the installs myself. I will update this thread when I get more details from my IT counterpart on how the system was setup.
This is used for a headless(no monitor, no keyboard) system running some custom applications.
Here are two problems.
1. If I plug into an ethernet network after I boot, the network never connects. I need to reboot with the network connected in order to get an IP. What is the service to "auto connect" to a network?
2. I have a network printer configured on lpd called myprinter. If I am connected to the network when I boot, I can print to this printer just fine using:
Code:
However, If I boot disconnected from the network and print to myprinter, the jobs obviously cannot print. They get spooled. Using 'lpstat -t' I can see that the spooled print jobs are assigned a job number and that myprinter is trying to connect. I shutdown, reconnect my ethernet network and boot up. All my printer configuration is blown away.
/etc/cups/printers.conf has been wiped out to look like this:
Code:
My 'good' printer configuration is copied to printers.conf.O
To recover from this, I need to stop cups, copy printers.conf.O to printers.conf, restart cups, and re-setup my network printer.
So, What causes my printers to get wiped out? I've repeated this on 4 systems with the same setup.
Has anyone managed to successfully get .net (mono) to work on fedora 10?
View 6 Replies View RelatedSo, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
My server is Centos 5.3 I have php 5.1.6. some of plug-ins does not work I have to upgrade it to 5.2.6.
To upgrade it I have to install a third party repositories.How can I protect my current php in case if the repository does not work I enable ( or role back) the Centos default php?
first because of my nvidia card if I don't put nomodeset my screen turns off.also whenever I try to update my nvidia drivers either the ones from the ones from the website or the propriety drivers I get a MCU failure or something like that and to fix that i have to change "nvidia" in my xorg.conf to "nv" but then my resolution loads to 640x480 which i cant change and it says im not using the propriety drivers so then i changed "nv" to "vesa" which makes my screen highest screen resolution 1280x 720 and apparently my refresh rate is 0. but i cant do anything good without the propriety drivers.Also my sound doesn't work at all unless i plug in some headphones.
View 7 Replies View RelatedIf I install a regular version of Ubuntu onto a USB drive using my desktop,can i plug the usb into my laptop and it will work normal,no issues having used the laptop desktop to install to the usb. Only reason asking because i can disable the harddrive on my laptop so i just unplug the harddrive in my desktop and install ubuntu like that onto usb,if theres a better method for laptop love to hear it
View 3 Replies View RelatedI just installed Linux(Ubuntu) and I when from Windows to Linux. I use the option to use the entire hard drive when it installed and my question is when I had it use the entire hard drive did it keep the computer drivers or did it erase them? I notice that the sound is only about have as loud as before but is that Linux or my computer? I also notice when I plug in my mp3 sometimes it doesn't detect it. Also when I plug in my headset into the font USB it doesn't work. I'm not sure what is going on.
View 2 Replies View RelatedI have a GuruPlug computer running Debian Lenny.
I put a perl script on it with the following shabang line.
#!/root/bin/perl -w
When I run the program from the command line I get the following message.
guru:~/bin$ ./ms_sync.pl
-bash: ./ms_sync.pl: /root/bin/perl: bad interpreter: Permission
denied
[Code]....
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
I deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
my sound system seems to work fine but the headphone doesn't work when i plug it in its jack male to laptop's female. Its not a usb system.
I have tried to use the instructions given by others in various threads but its still not working
My sound card is:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
When I start X, my keyboard does not work. It seems like the wrong layout is being used. If I unplug it and then plug it back in then everything is good. I only have any Xkb options in xorg.conf.d. below is my keyboard config from xorg.conf.d. NOTE: I have /etc/X11/xorg.conf.d symlink'd to /usr/share/X11/xorg.conf.d, if that might be the cause of this problem
Code:
Section "InputClass"
Identifier "Apple USB Keyboard"
[code]...
I install from openSUSE-11.3-NET-x86_64.iso. Installation was succesfull, but after install all packet on test internet / update was error. And after log in in installed system internet not work. I use router with DHCP
View 8 Replies View RelatedI have an OpenSuSE 11.1 in vmWare ESX and every other boot I can't access any running network services (ssh, webmin, qmail, mysql, ...) from outside. I just need to login, reboot and voila - network services are working.I gradually updated to 11.2 and 11.3 by following the wiki with success but this problem remained. So I reverted to snapshot of 11.1 and now I would like to identify and solve the problem here first.I also looked at /var/log/messages /var/log/boot.msg /var/log/lastlog but can't find anything usefull. I will now compare those files from the working and non-working boot but meanwhile someone already has an idea or experience what could be wrong?
View 3 Replies View RelatedI had Kubuntu 64-bit installed and decided to try OpenSUSE instead as I was having problems getting the audio to work on Skype. After installing OpenSUSE 11.3 (64-bit), I do not have network connectivity (Ethernet or Wireless)? Neither adapter can be detected? I thought the install would be fairly straightforward as Kubuntu 64-bit detected all the hardware.
View 6 Replies View RelatedI want to run a script when the switch goes down and an other when it goes up. Is there an easy way to pull this off in Debian (preferably with no other than system tools)? I suppose there is no difference (in the OS point of view) between unplugging ethernet cable and the switch losing power.
On an event I get lines like these in the syslog:
Jun 15 17:49:41 debian kernel: [ 5506.956130] igb: eth1 NIC Link is Down
...
Jun 15 17:49:45 debian kernel: [ 5511.168788] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
In FreeBSD you can pipe log messages (pre-filtered by regex patterns) to a program. What is the easiest way to replicate this on Debian (with as little additional software as possible)?
I have this treacherous program in C which uses external static libraries (extern etc), and want to do a coverage test of it. The libraries are written in fortran. I compile like this Code: gcc -fprofile-arcs -ftest-coverage -o main main.c library.o I run my nice program like that
Code: ./main Then I do the magic stuff
Code: gcov main.c library.f
Ok 98% of the lines were used in main.c, and I get a file with line counts and all that. Great! But, I need to know the coverage in my library too! It says 0.0% and that's impossible. So what can I do? I can't run it like an executable because it's a library.
And why is the terminal not accepting my copy paste? I copy some lines from my IDE, then I want to paste it into the terminal (with ctrl-v of course, not some crazy local application non-standard counter-intuitive key combo made just to cause agony among honest users!), and that could've been the only problem here, but it isn't. I can't even paste with that right click menu. So, if I was crazy before, I went nuts after that. My great "solution" was to paste it into the firefox URL field (not the search field ) and then copy that and paste it into the terminal. Is that common practice for you all while dealing with that unburied DOS-window?
Linux Server automatically reboots when i plug in the network cable.it was working fine till 2 days back and no changes were made to it.any light on this note pls? kindly confirm if any logs are required for the discussion!
View 1 Replies View RelatedAre there any security risks I should be aware of if I have Mono installed?
View 3 Replies View RelatedGuy Im having issues getting my NIC to work. I dont think the NIC is faulty because when I plug the network cable in I get the green and orange light and I get the below result when running lspci | grep net
Code:
:~$ lspci | grep net
02:08.0 Ethernet Controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (Rev 42)
[code]....
The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that