I have a GuruPlug computer running Debian Lenny.
I put a perl script on it with the following shabang line.
#!/root/bin/perl -w
When I run the program from the command line I get the following message.
guru:~/bin$ ./ms_sync.pl
-bash: ./ms_sync.pl: /root/bin/perl: bad interpreter: Permission
denied
[Code]....
You have .exe files to install stuff. Even tho I have used ndiswrapper in the past I can't remember how now. I've got a nice old laptop with a nice install of SUSE 10 that does everything I want except connect to the internet. I've got about 1 more day of patience remaining before I have to revert to the hated Ws. I even got a supposed "plug and play" Asus usb-n10, but have not been able to work out the install.
View 6 Replies View RelatedMy server is Centos 5.3 I have php 5.1.6. some of plug-ins does not work I have to upgrade it to 5.2.6.
To upgrade it I have to install a third party repositories.How can I protect my current php in case if the repository does not work I enable ( or role back) the Centos default php?
I have a WAN network that i need to do some analysis on, for the traffic flows. I did lots of googling to figure out what useful tool to collect the packet informations.I found this site http://scrutin.wordpress.com/2007/04...-tcpdump/witch i made great use of to recognize the tcpdum tool.
I also have a network simulator on windows platform wich is Opnet Guru, (by the way.. is there a linux version for this simulator?).
MY QUESTION IS::
How can i feed the Opnet Guru with the flows data collected with the
Code:
tcpdumpwith its different options?
NOTE: in the Opnet Guru invironment there is an object called the profile that is being used to customize and genarate data flows with the desired characteristics to simulate the real flows. So i need to feed the Opnet with the fresh data collected with the tcpdump tool (command) instead of using the built-in profile.
first because of my nvidia card if I don't put nomodeset my screen turns off.also whenever I try to update my nvidia drivers either the ones from the ones from the website or the propriety drivers I get a MCU failure or something like that and to fix that i have to change "nvidia" in my xorg.conf to "nv" but then my resolution loads to 640x480 which i cant change and it says im not using the propriety drivers so then i changed "nv" to "vesa" which makes my screen highest screen resolution 1280x 720 and apparently my refresh rate is 0. but i cant do anything good without the propriety drivers.Also my sound doesn't work at all unless i plug in some headphones.
View 7 Replies View RelatedIf I install a regular version of Ubuntu onto a USB drive using my desktop,can i plug the usb into my laptop and it will work normal,no issues having used the laptop desktop to install to the usb. Only reason asking because i can disable the harddrive on my laptop so i just unplug the harddrive in my desktop and install ubuntu like that onto usb,if theres a better method for laptop love to hear it
View 3 Replies View RelatedI just installed Linux(Ubuntu) and I when from Windows to Linux. I use the option to use the entire hard drive when it installed and my question is when I had it use the entire hard drive did it keep the computer drivers or did it erase them? I notice that the sound is only about have as loud as before but is that Linux or my computer? I also notice when I plug in my mp3 sometimes it doesn't detect it. Also when I plug in my headset into the font USB it doesn't work. I'm not sure what is going on.
View 2 Replies View Relatedmy sound system seems to work fine but the headphone doesn't work when i plug it in its jack male to laptop's female. Its not a usb system.
I have tried to use the instructions given by others in various threads but its still not working
My sound card is:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
When I start X, my keyboard does not work. It seems like the wrong layout is being used. If I unplug it and then plug it back in then everything is good. I only have any Xkb options in xorg.conf.d. below is my keyboard config from xorg.conf.d. NOTE: I have /etc/X11/xorg.conf.d symlink'd to /usr/share/X11/xorg.conf.d, if that might be the cause of this problem
Code:
Section "InputClass"
Identifier "Apple USB Keyboard"
[code]...
Hi. I'm running the 64 bit OpenSuse 11.2 distro with Firefox 3.5.7 and the Novell mono plugin installed but still can't watch the olympics coverage on CTV.
Is there something else I also need to install?
I've come across an unusual requirement for a service in my Ubuntu system.Simply put, I need to find a way to search for all instances of a term in a file, delete lines containing containing that term, and delete four lines below each instance of that term. ither that, or copy the entirety of a file to a new file and skip over all lines containing the term plus four below it.This sounds kinda weird, I know. Without going too far into detail, I either have to change the logfile format for a server I'm running which is a huge pain in the butt, or I can just run a script to edit an HTML report generated from said logs. (Said report is really just for managers to peruse, and I like my log format, so I'm pursuing option 2.)
View 4 Replies View Relatedyesterday I upgraded of my ubuntu release from 10.04 to 10.10 and now, when I plug my mp3 creative zen player it doesn't work.The same player works very well with 10.04 and I can upload my mp3s directly from rythmnbox using drag&drop.Here my /var/log/syslog
Code:
Oct 20 15:58:20 tarini-laptop kernel: [25042.100344] hub 4-0:1.0: unable to enumerate USB device on port 2
Oct 20 15:58:38 tarini-laptop kernel: [25059.970030] usb 1-1: new high speed USB device using ehci_hcd and address 16
Oct 20 15:58:38 tarini-laptop kernel: [25060.102634] usb 1-1: device descriptor read/64, error -71[code].....
I have a DSL modem with four ports and a built-in wireless router downstairs. It works great: I have wired Ethernet for my PCs downstairs (all plugged in directly to the DSL modem); my son has great wireless access upstairs (using the built-in wireless in his laptop). PROBLEM: I want to add another, desktop, PC upstairs. I've been trying to use wireless, with a plug-in a Linksys USB stick. It doesn't work worth crap.
I'm considering a) getting another phone jack upstairs, and moving my DSL modem there, or b) stringing some CAT-5 cable from the modem downstairs to the PC upstairs. Putting a wireless PCI card in my upstairs desktop PC might also solve the problem, but the PC only has one PCI slot, and I'd rather keep it free, if at all possible.
QUESTION: Is there any kind of "wireless repeater", where I can a) get wireless access from my DSL modem/wireless base station downstairs, and b) give me some spare Ethernet ports, so I can plug in desktop PC (so the PC can have a wired Ethernet connection)? POSSIBLE SOLUTION: I have an old Linksys WRT54G router that I'm not using. Q: Is there any way to configure it for this purpose? Q: Would it be possible to use it for this purpose if I installed OpenWRT?
I need plug-ins to enable Kaffeine to access and play my DVDs. Where and how do I fins such plug-ins?
View 2 Replies View RelatedI have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:
[Code]...
I've just installed Kubuntu 11.04, switched on wobbly windows effect. It runs very smooth on my Nvidia GeForce 7600 GS with dual screen twinview turned on. However, I get these lines when I drag/move the window upwards - see screenshot:
View 6 Replies View RelatedI use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back!
I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console.
Edit: just one pci-e video card, has dvi, vga, tv/out (s-video)
Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.
How do you remove parts of strings using python? Such as, if I have something like:
Code:
erme1 sdifskenklsd
erme2 sdfjksliel
[code]....
I have this massive table file with some data in it and I want to replace some lines that are wrong with the correct ones that are in another table file of the same format. The wrong lines are not all together in a block but randomly distributed so I need to make a loop checking if the line is in the other file and if it is, replace it. I want to try and do it with sed or awk but I don't really know how to....
View 12 Replies View RelatedI want the volume to change when I plug in headphones, because my netbook's speakers are really quiet but the earbuds I have are really loud when I plug them in. I'm running Ubuntu Lucid Netbook Edition on an Asus eeePC 1005HA, if that's important.
View 1 Replies View RelatedI've set up OpenVPN on a Linux server. All my Internet traffic goes through the VPN from that server. I'm running Windows 7 at home. I noticed in Wireshark that DNS queries are not going through the encrypted tunnel, but instead directly to my ISP's designated DNS servers.
To overcome this, I tried pushing DNS for OpenVPN from the server to my computer, and also inputting the DNS address in my wireless adapter's configuration options. This appears to have secured the DNS leak, but is it the proper way to go about it? If I didn't push the DNS address from the server to the client and only set the DNS in the client's wireless adapter, then I couldn't visit any website. And if I just pushed the DNS but didn't set it in the adapter, then some DNS requests still leaked to the ISP's DNS servers.
I want to run a script when the switch goes down and an other when it goes up. Is there an easy way to pull this off in Debian (preferably with no other than system tools)? I suppose there is no difference (in the OS point of view) between unplugging ethernet cable and the switch losing power.
On an event I get lines like these in the syslog:
Jun 15 17:49:41 debian kernel: [ 5506.956130] igb: eth1 NIC Link is Down
...
Jun 15 17:49:45 debian kernel: [ 5511.168788] igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
In FreeBSD you can pipe log messages (pre-filtered by regex patterns) to a program. What is the easiest way to replicate this on Debian (with as little additional software as possible)?
Using Windows 7's superbar, I can select/launch the 2nd application group by <Win>+<2>. We have DockbarX in GNOME, which is nice (grouping the windows like Windows 7), but it doesn't enable the <Win>+<2> style keybaord shortcuts.This is not restricted to making Linux like Windows. But I just find the <Win>+<2> style shortcut very useful. Are there similar ways in Linux to quickly switch between specific apps without pressing <Alt>+<Tab> many many times?
View 1 Replies View RelatedUsing Linux, I have several backup levels. One of them is a periodical sector by sector copy (using dd) of my laptop harddisk to an external USB disk. Yes, I have other backups too, like remote rsync. This approach (the disk dd) is OK when cloning a HDD with no LVM volumes, since I can plug the external disk anytime and mount the partitions simply mounting /dev/sdb* instead of /dev/sda*. Trivial and handy.
Today I moved ALL my harddisk (including the /boot) to LVM. Everything works fine. I will stress it for a couple of days, and then I will do a sector by sector copy to my external harddisk. Now I have a problem, I guess.
If in the future I plug the external USB HDD to recover any file, the OS will detect a duplicate LVM configuration, with the same name and the same UUID. Even doing a vgrename (which LVM would be renamed, the internal HDD or the external HDD?), the cloned UUID will not change. Is there any command to change name and UUID? Ideally I would clone the HDD and then change the LVM group name and its UUID, but I don't know how to do it. Another related issue would be... In the past I have booted my laptop using the external disk, using the BIOS boot menu and changing GRUB entries manually to boot from /dev/sdb instead of /dev/sda. But now my current GRUB configuration boots directly from a LVM logical volume, something like: set root='(LVM-root)' in my grub.cfg. So... What is going to happen with duplicated volumes?
I am running a server in Dell which has RAID1 and hot plug 2 disks. It's been running for a while, but I was thinking it may crash anytime. So got a spare one, and wanted to test it how it works.I have never done this before. Can I simply, on a running machine, unplug the Disk 2 and connect the new Disk there? (Without interrupting the service as a silent mode?) Or does it have to be shutdown first, and unplugged, reinstalling all software/centos/etc etc? How do you do this update? Also how do you know when you replaced the disk? Do you have anything special to monitor that disk 1 or disk 2 is end of life?
View 1 Replies View RelatedLinux Server automatically reboots when i plug in the network cable.it was working fine till 2 days back and no changes were made to it.any light on this note pls? kindly confirm if any logs are required for the discussion!
View 1 Replies View RelatedI have installed Kubuntu 9.04 on my ex Mandriva USB swing device and after a shaky start all works ok (at this point i have removed the windows hard drive and using the USB device)
Now i need to use the Internet, I have a Telstra Mobile Bigpond wireless broadband USB device which is great for windows, but i want to use it on kubuntu if i can.
Guy Im having issues getting my NIC to work. I dont think the NIC is faulty because when I plug the network cable in I get the green and orange light and I get the below result when running lspci | grep net
Code:
:~$ lspci | grep net
02:08.0 Ethernet Controller: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller (Rev 42)
[code]....
I have a file with n number of lines where every 2 lines are grouped.
So I want to print the items in a line and the next line in a single line.
For example:
I can print the line and the adjacent together and print the required items like this:
But that's not the order I want. How can I get it printed like below:
when I run the following command:
awk -F, '{print $10 "," $5 "," $1 "," $3 "," $4 "}' myfile > tmpfile
tmpfile displays the lines but they are all cut off and placed on the line below at the same point.