OpenSUSE :: 11.4 Keepass Doesn't Work With Distro Mono
Mar 14, 2011After openSUSE11.3->openSUSE11.4 upgrade Keepass2.14 stopped working. Seems to be problem with mono included in 11.4.
ADVERTISEMENT
Debian :: Cannot Paste Into Terminal (only) From KeePass (using Mono)
Jun 12, 2010I'm using KeePass 2.10 (with mono) and I am able to copy a password from KeePass (Ctrl+C) and paste into ALL applications except for the GNOME Terminal. When I copy something, I am not able to paste into the terminal, and find the Paste menu item in the edit menu disabled. However, if I paste into another application and cut from there, I can paste into the terminal.
(if it is a bug) which project I should report a bug to (gnome or KeePass?).
Networking :: Why Doesn't Distro 9.0 Setup Work For 13.1 Distro?
Sep 6, 2010I have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.
This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.
Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.
I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).
OpenSUSE Network :: Can't Get Novell Mono Plug In To Work With CTV Olympics Coverage
Feb 15, 2010Hi. I'm running the 64 bit OpenSuse 11.2 distro with Firefox 3.5.7 and the Novell mono plugin installed but still can't watch the olympics coverage on CTV.
Is there something else I also need to install?
Hardware :: Suspend / Sleep Mode Doesn't Work In Distro
Aug 26, 2010I've tried ubuntu, kubuntu, fedora and linux mint. all 64 bit versions. I've also tried to suspend through applications like acpitool. But nothing works. When I click on Suspend, the screen goes blank but the computer is still running. The wireless network adaptor gets disabled for a second and then comes back on. All I have to do is press a key and I get the unlock screen prompt. Basically, suspend works like 'Lock Screen'. I have a HP Pavillion laptop. Core 2 Duo @ 2 GHz and 4 GB RAM.
View 12 Replies View RelatedUbuntu Installation :: Can't Make A Distro Of That Offers To Users The Files And Apps For Use With Mono?
Mar 11, 2011I would like to see when installing ubuntu a choice for users to choose what they want installed on their system or not. I know for a fact that there are some like myself that does not want mono runtime files or mono apps on their linux box and when we try to uninstall all the files or apps that link with mono ends up breaking the linux box.
My question is why can't ubuntu make a distro of ubuntu that offers to users the files and apps for use with mono and a choice for those users to install ubuntu with out the mono files or apps. There are somne of us that think mono is as bad as .net and some of us want a linux box that runs linux and not window files or apps unless they can be written as pure linux code and not C# crap. I feel that C or C++ is the real way to write linux code and anything written in C# is windows and always will be windows. If they want to put more windows stuff on ubuntu, then they shouldn't be calling it linux..
OpenSUSE :: Wine Doesn't Run A Program (unlike Other Distro!)?
Mar 26, 2010i had Mandriva few days ago (and other distros befor that!) and just moved to openSUSE
i use a program called "UltraSurf" (to bypass Internet filtering in Iran) and this program doesn't work with wine in openSUSE!i reinstalled wine and tried different versions but when i click on my program nothing happens! (other windows programs work fine!)
Ubuntu :: Konsole Doesn't Use Liberation Mono
May 19, 2010I have set the konsole font to liberation mono, but I'm reasonably sure that the font that konsole is actually using is not liberation mono. It looks very different from the font used by xterm, emacs, gnome-terminal, etc.
Is there some font mapping hidden away somewhere that is overriding my choice?
Software :: Mono 1.1.12 - Install Older Mono To Co-exist With Current Version
Feb 28, 2010I would like to know if anyone has run more than one version of mono concurrently. I want to host a Battlefield 2 server with bf2ccd that requires mono 1.1.12. CentOS 5.3 repos provide mono 1.2.4 which is neither new enough nor old enough to support bf2ccd. I have considered compiling a newer version or an older version to accommodate this but I think that the only fully supported version is the 1.1.12 and I want to have the newer mono for other projects. I have used Slackware exclusively up to now and am not familiar with CentOS yet so I would like to avoid compiling if I can. The server is an unmanaged dedicated server so I'm not certain of all of the details. AFAIK it is a standard CentOS 5.3 install.
View 4 Replies View RelatedFedora Servers :: Get .net (mono) To Work On 10?
Mar 3, 2009Has anyone managed to successfully get .net (mono) to work on fedora 10?
View 6 Replies View RelatedGeneral :: Why Is Ubuntu Trying To Open Mono App With Wine Instead Of Mono
Aug 24, 2010So, I have compiled a C# program on Linux using MonoDevelop. When I try to execute the resulting binary, my system tries and fails to run it as a windows executable, with wine. Wine gives me the following message:
$ ~/bin/MyMonoApp
wine: Install the Windows version of Mono to run .NET executables
~/bin/MyMonoApp: command not found
I can only convince it to run by explicitly calling mono:
$ mono ~/bin/MyMonoApp
So, how can I make this the default, so I don't have to explicitly call mono every time?
Software :: KeePass 2 Ignores Commandline Argument?
Jul 2, 2011I run the password manager KeePass2 with the following starter:
Code:
mono /opt/keepass2-mono/KeePass.exe /home/XXXXXXX/KeePass.kdbx
While the program runs fine, it does not select the database automatically (last argument). This used to work with KeePassX. Nor does KeePass2 remember the recently opened files (the menu remains empty).
My system: Ubuntu Natty 32bit, KeePass 2.15
PS: I have to use KeePass2 as I need to share the database with other OS where KeePass1 is not supported. And would love to see ported KeePass2 to linux without mono. Keepass2 also looks worse than KeePassX IMO.
OpenSUSE Install :: Installed OpenSUSE On Pen Drive Persistence Doesn't Work?
Jun 10, 2010I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
OpenSUSE Wireless :: Intel 4965 Doesn't Work On OpenSuse 11.2
May 6, 2010I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the IntelŪ Wireless WiFi Link drivers for Linux* website.
View 9 Replies View RelatedOpenSUSE :: Kvm Doesn't Work
Aug 25, 2010using suse 11.3 and kde 4.5 I installed kvm, I tried to install widows xp, everything works well until when the windows cd restart, there kvm shows en error like no disk to boot and don't reboot to continue the installation.
View 1 Replies View RelatedOpenSUSE :: Skype Doesn't Work In 11.3?
Dec 15, 2010Skype does not work in Suse 11.3. When i start in an terminal, i'm getting this error:
skype: error while loading shared libraries: libQtGui.so.4: cannot open shared object file: No such file or directory
I looked for that library but didn't find it in the repositories.
PS. Running Smeegol on Samsung N150
OpenSUSE Install :: USB Doesn't Work At All Once
Mar 30, 2010As stated, NO USB functions, not at all, the light on the mouse is on, but it does not move on screen, the PS2 keyboard does not function either. Nothing that would allow you to install it, works at all. I am absolutely shocked not one single person on here has mentioned this.
The last time I tried OpenSuse was version 10, it installed without issue, I noted the installer as the nicest one in the Linux world I had seen to date, only to be utterly let down by this USB fumble.I have Legacy USB support, Legacy Keyboard and Legacy Mouse USB support on, that isn't the issue, and this didn't happen with 10 on the same system.
OpenSUSE :: Are There Any Security Risks To Mono
Jul 17, 2010Are there any security risks I should be aware of if I have Mono installed?
View 3 Replies View RelatedOpenSUSE :: Automatic Update Doesn't Work After 11.2
Jan 4, 2010I installed from scratch 11.2, but i see now that the Automatic update doesn't work. I run "Refresh" on Updater Applet and it come up with an error: PackageKit Error repo-not-available:
View 9 Replies View RelatedOpenSUSE :: Plasmoid Now Playing Doesn't Work?
Jan 28, 2010I have a problem whit this plasmoid.If I add this plasmoid while amarok runs, It works correctly.But if I close Amarok e then I run it again, plasmoid doesn't work.
View 2 Replies View RelatedOpenSUSE :: GParted LiveUSB Doesn't Work
Feb 10, 2010I've created the GParted LiveUSB from what I found on the Ubuntu forum. Apparently the instructions given on GParted website doesn't work.
I essentially copied the necessary gparted files to my USB and then made it bootable using syslinux.
I've set the boot sequence properly to boot from my USB but it still doesn't do anything and just brings up the screen where I select my OSs (I have a dual-boot system with WinXP).
I don't have access to a CD-drive so will have to use the USB. Is there a different way to make the LiveUSB?
OpenSUSE :: Gnome Shell Doesn't Work?
May 30, 2010i tried gnome shell from the software center, but it has some graphics issues. Is it my graphics driver?
View 6 Replies View RelatedOpenSUSE :: Can't Ssh Into Laptop - Password Doesn't Work
Oct 26, 2010So, I jaibroke my iPod touch and have OpenSSH and I can ssh into my iPod, but I cannot ssh back into my Laptop??
I did
Code:
$ echo '192.168.*.*' >> /etc/hosts.allow ##I googled and it said to do this
$ echo 'sshd: 192.168.*.*' >> /etc/hosts.allow
I also uncommented these lines in /etc/ssh/sshd_config:
[Code]....
I am 100% sure I am putting in the right password. I even did that ^ code from my laptop, the one I am ssh'ing into, but it still will not accept my password. I even tried root@ instead of matt@..
OpenSUSE :: Shutdown Button Doesn't Work
Oct 30, 2010When I clicked the shutdown button through the menu, the computer seem to do not respond. And the command line works well.
View 9 Replies View RelatedOpenSUSE :: Ocfs2console Doesn't Work Under 11.4 X86_64?
Mar 15, 2011It looks like the ocfs2console is broken on openSuse 11.4 64bit. I tested on several servers and my laptop. It works under 11.3 x86_64 but that uses Python 2.6. OpenSuse 11.4 uses Python 2.7.
I tried to submit a bug but I can't seem to get my email address verified so I can use the bug tracker.
Server1:~/python-gtk/pygtk-2.12.1 # ocfs2console
ERROR: Unable to initialize the windowing
system: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Server1:~/python-gtk/pygtk-2.12.1 # uname -a
Linux Server1 2.6.37.1-1.2-xen #1 SMP 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
Server1:~/python-gtk/pygtk-2.12.1 # python
Python 2.7 (r27:82500, Aug 07 2010, 16:54:59) [GCC] on linux2
OpenSUSE :: Command Doesnīt Work Anymore On 11.4?
May 23, 2011have You noticed that mt command doesnīt work anymore on 11.4? We try to install new version to hadle robotic library, but someone has written mt command as a new, and it doesnīt accept mt -f command anymore. cpio based mt command itīs not reliable as old one. Can anyone tell where to get old mt command which is compatrible new 11.4 x64 bit version?
View 9 Replies View RelatedOpenSUSE Hardware :: CD Drive Doesn't Work?
Oct 10, 2009My CD drive is attached as secondary slave but it doesn't appear anywhere, eg. no /dev/hdd or /dev/cdrom. It is not listet in hwinfo either. I completely re-installed SuSE from network today, so it's the newest version. The drive always worked fine in SuSE 9.x and also booting the Network Setup CD worked properly.
May there be missing packages? What do I have to check next?
OpenSUSE Hardware :: Mouse Doesn't Work - Use Through A Hub?
Apr 22, 2010i have a regular ole USB mouse and got a USB hub to expand the number of ports i have. I connected my USB mouse to the hub which worked in Windows but when i booted up linux the mouse did not work. If i plug the mouse in directly then it works again but i would like to figure out how to make the mouse work using a hub but am not quite sure where to start,
View 6 Replies View RelatedOpenSUSE Multimedia :: Webcam Doesn't Work Right?
Jun 21, 2011I have a webcam in my monitor (Acer H243HX). It is seen by the system (11.4):
Code:
> kernel - - - [302942.719649] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]...
OpenSUSE :: Mono Gives An Error While Starting A C# Application?
Jun 9, 2011The program I want to use: ProppFrexx Tagger or ProppFrexx Meta Data Editor, can be found here: ProppFrexx ONAIR - The Playout and Broadcast Automation Solution I need this to tag WAV files with RIFF INFO Tags.The Sony PSP can read RIFF Tags! so yeah, that's the reason I need this program. here the complete error message
Code:
exception inside UnhandledException handler: USER32.dll
I don't have Windows anymore, and I never going to use Windows again I hope there is a fix for that