I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
Isn't the scrobbler (or whatever it is called) built into the newer Amarok as it used to? I recently upgraded to 2.3.1 and I can not find any possibility to connect with Last.fm. Do one have to install it separately instead?I am on OS 11.2 and upgraded through KDE application update repo.
View 2 Replies View Relatedi am using ubuntu 11.04 trying get working Internet DJ Console but i am experiencing problem to connect to the Jack server
i already checked the intructions given in the idjc project webpage, installing the application and configuring the jack
i had already properly set the correct sound card chipset name(snd-hda-intel) on the kermel module and configured to load everytime is boot
installed all the dependecies for jack...but i am still not knowing what i am doing wrong
here i am going to post the info when i try load the application on the terminal:
root@ubuntu:~# sudo echo "@audio - rtprio 100" >> /etc/security/limits.conf
root@ubuntu:~# sudo echo "@audio - nice -10" >> /etc/security/limits.conf
root@ubuntu:~# echo "/usr/bin/jackd -d alsa -r 44100 -p 256" > ~/.jackdrc
root@ubuntu:~# idjc
[Code].....
I am not able to connect to the Remote VNC Server..Error: ConnectToTcpAddr: connect: Connection refused.
View 6 Replies View RelatedI'm having a real problem with intermittent ssh disconnections?It's the same thing regardless if it's over ethernet or wireless, and nfs shares don't have any problems at all.
View 1 Replies View RelatedI'm using something like telnet [URL] 25 and it comes back as not being able to connect to host on port 25. I don't have port 25 blocked anywhere. I turned off the firewall and even opened up port 25 on the hardware firewall router. If I ping it I can connect.
View 2 Replies View RelatedI recently installed Ubuntu 10.04 and I would use my tv as desktop, in wireless connection with my notebook. The problem is that on the page url I haven't found the software for Linux.
View 3 Replies View RelatedI tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main
deb-src http://ftp.rediris.es/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://ftp.rediris.es/debian/ squeeze-updates main
deb-src http://ftp.rediris.es/debian/ squeeze-updates main
I cannot use cvs within eclipse to connect to the server, but when I use cvs in terminal everything works fine.
ERROR Message: Could not connect to :extssh:hongyang@bleong.ndslab.net:/var/cvsroot: CVS communication error: org.eclipse.team.internal.ccvs.ssh2.CVSSSH2ServerConnection$SSH2IOException: Network is unreachable
Network is unreachable
I have been trying to get this setup working for a day now, I have:
QNAP NAS box running Twonky 5.1.3
I can browse to it and use the web browser to see all of the media I have uploaded to it. I have a ubuntu lucid clean insalled system with rhythbox and the coherence DLNA plugin. I cannot get the rhythmbox to see the media on the server. Very briefly at one point I saw the server name appear as RB started, but it disappeared immediately. I have something like 5K songs up mostly in MP3 format.
I am not able to connect samba server from other linux pc giving error: NT Authentication Failure
But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.
every since i upgraded to 9.10 Karmic Koala i can no longer connect my camera or my camera phone to the computer to get my pics off..
View 2 Replies View RelatedI'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
I'm trying to run Debian server in our network. We have SSG5 Juniper Firewall set up to route traffic from our trusted network 192.168.50.0/24 to our DMZ 93.153.125.224/28I can connect / ping all Windows servers which are in DMZ. When I try to connect my Debian server instead of one of the server's static IP I'm unable to connect or ping to it. The server itself is able to connect to internet resolve DNS if I allow connection to our trusted network I'm able to ping or connect to any computer in trusted network but still unable to ping from trusted to DMZ. The SSG5 policy is set up to allow any connection from trust to DMZ and interface is set up to route all traffic.I have tried to trace the ping It'll go through firewall right to the interface needed but then it'll time out as like the server is not connected at all.
View 1 Replies View RelatedI am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
I install one server in my system(linux 5.0) and accessing that server through the 127.0.0.1 private ip address(lo). While i connect to a remote server for validating registry it gives me the error and unable to connect to remote server. here some of the files i give here in below to know my system network configuration
/etc/hosts
------------
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
127.0.0.1 cp.softidsolutions.org
[code]....
I have Squid 2.5 stable3 in a RedHAt machine, the problem i have is that i can't connect to an FTP site, i got the squid screen:
An FTP authentication failure occurred while trying to retrieve the URL: [URL]
Squid sent the following FTP command:
PASS <yourpassword>and then received this reply User anonymous cannot log in.Your cache administrator is root.
I'm able to browse anonymous FTP sites like ftp://ftp.ea.com, but not any with authentication.
i have setup
acl FTP proto allow ftp
http_access allow ftp
but still can't connect. I also can't connect to secure port 443 for an application in th network.
when i connect the machines outside te SQUID i can use the ftp and secure ports.
On the server having live ip address, I have installed vnc server using:
yum install vnc-server
yum groupinstall "X Window System" "GNOME Desktop Environment"
yum install xinetd vnc-ltsp-config
/sbin/chkconfig xinetd on
/sbin/chkconfig vncts on
/sbin/service xinetd restart
On my local machine connected to internet via LAN, I have installed vnc viewer using: yum install vnc When I connect to the vnc server using vncviewer ipaddressofvncserver:1 it shows unable to connect to host. No route to host (113)
I installed dovecot on my server and now the imap and pop3 ports are open.But when I want to telnet it, it's not possible.Code: Trying 127.0.0.1...telnet: Unable to connect to remote host: Connection timed out.Also I can't any ports else. But I can connect to it from other computers. I tried to connect to this from my PC and it was successful.
View 7 Replies View Relatediam not able to connect localhost in mysql.i uswd command for mysql is
#mysqladmin -u root -h localhost password "123456"
ErroR:-
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
I have a Ubuntu server (10.10) setup with apache and is being port NAT'ted via firewall from outside to the webserver.I am able to access the webserver from inside LAN but not from outside. NATs are working fine because I can see the traffic come through on tcpdump but the webserver will not respond to the request from outside ip address.Here are the tcpdumps.
10:11:58.939005 IP 12.xxx.xxx.6.10146 > 172.16.2.100.80: Flags [S], seq 3098920688, win 65535, options [mss 1380,nop,nop,nop,nop], length 0
10:12:01.898852 IP 12.xxx.xxx.6.10146 > 172.16.2.100.80: Flags [S], seq 3098920688,
[code]....
Is anyone else having problems with the repositories today?
View 4 Replies View RelatedI run my own mail server. There's only one part that isn't working and I can't seem to figure out why: sending mail from a client - in this case, Thunderbird.
I can send mail off-server just fine if I log in via telnet. I can receive email just fine with Thunderbird.
Here are my relevant configs:
/etc/postfix/main.cf:
Code:
queue_directory = /var/spool/postfix
message_size_limit = 102400000
mailbox_size_limit = 1024000000
command_directory = /usr/sbin
[Code].....
Unable to run programs as su - (root) from command line. example: kfind or yast2error:cannot connect to X ServerAfter I exit as root, I am able to excute both commands successfully.I will not work as su -. Operating System: SLES 9 (using KDE).
View 2 Replies View RelatedWhen I was checking the /var/log/messages, I found these entries:
Mar 16 15:14:38 localhost smbd[13347]: [2010/03/16 15:14:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:14:38 localhost smbd[13347]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13691]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13691]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:24:38 localhost smbd[13692]: [2010/03/16 15:24:38, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:24:38 localhost smbd[13692]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13716]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13716]: Unable to connect to CUPS server localhost:631 - Connection refused
Mar 16 15:27:34 localhost smbd[13718]: [2010/03/16 15:27:34, 0] printing/print_cups.c:cups_connect(78)
Mar 16 15:27:34 localhost smbd[13718]: Unable to connect to CUPS server localhost:631 - Connection refused
CUPS is stopped in the system and the system is configured as samba server. What could be the reason for these printing requests from smbd?
I installed 11.2 on an older HP Laptop which was running XP without any issues. Durring the install, the update processe failed (presumably unble to connect to respository). I am usind a wired connection and the nic is connecting to my router and is recieving an address via DHCP. I am also able to ping the workstion from the router's Web interface. However I am unbale to connect to the internet.I have turned off the Suse firewall via Yast and checked the settings against another computer running ver 11.1 .Everything appears to be correct but no joy.
View 9 Replies View Related