I installed dovecot on my server and now the imap and pop3 ports are open.But when I want to telnet it, it's not possible.Code: Trying 127.0.0.1...telnet: Unable to connect to remote host: Connection timed out.Also I can't any ports else. But I can connect to it from other computers. I tried to connect to this from my PC and it was successful.
View 7 RepliesMy system is Ubuntu 11Before I typed "telnet localhost" or "telnet localhost 23". I have make this work below:$sudo apt-get install xinetd$vim /etc/xinetd.conf
defaults{
instances=60
log_type=SYSLOGauthpriv
[code]....
I am using TomCat6 with Ubuntu Server 9.10 x64. I successfully configured to iptables to redirect the port "443" to "8443" (Tomcat SSL), using this command:
[code]...
when i try a telnet to a host like that: telnet 10.10.10.10 1234 i got this: telnet: Unable to connect to remote host: Connection refused.
1/ does this mean that the problem is not due to a firewall, but that the host 10.10.10.10 doesn't listen on the port 1234? other way does this mean that my firewall is authorizing traffic on the port 1234?
and when i try a telnet on another port like that: telnet 10.10.10.10 1235 i get: Trying 10.10.10.10 ...
in this case this
2/ does this mean that the firewall is blocking the traffic between my host and the 10.10.10.10 on the port 1235?
I did a clean install of the latest version of Ubuntu. For some reason, there are still internet-issues. When I tried out the following command
Code:
telnet
open ftp.microsoft.com 21
I got
Code:
telnet: Unable to connect to remote host: Connection timed out
Also, during install of the new ubuntu, it was unable to reach the repos for downloading. Odd thing is that I can go online, and that when I type 'ftp.microsoft.com' in my browser, it displays the file-hierarchy.
I am running CentOS 5.1 on VMware on Win 7 On CentOS I added Bridged network adapter and the server is connected to internet without any problems, but when I telnet any server on port 25 I get connection timeout.
Code:
telnet f.mx.mail.yahoo.com 25
Trying 98.137.54.237...
telnet: connect to address 98.137.54.237: Connection timed out
telnet: Unable to connect to remote host: Connection timed out
I stopped all servers, iptables and sendmail on the linux server and the firewalls on the win 7 but still getting the same error! I added new network adapter ( host-only ) and tried to telnet the win machine from vmware Linux but I got connection refused
Code:
telnet 192.168.71.1 25
Trying 192.168.71.1...
telnet: connect to address 192.168.71.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
[code]....
When i am trying to telnet to a machine connected in our LAN ..
telnet: Unable to connect to remote host: Connection refused
What's the reason for this? how do i establish a connection? I am using ubuntu 10.04.
I did followings:
Code:
But got:
Code:
But as I tried:
Code:
It's OK.
telnet localhost the output is...
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
telnet: Unable to connect to remote host: Connection refused
I don't understand what is the problem. Its not configured properly how do i configure it?
I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.
View 3 Replies View RelatedI'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.
View 3 Replies View RelatedI'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.
But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused
I am not able to connect to the Remote VNC Server..Error: ConnectToTcpAddr: connect: Connection refused.
View 6 Replies View RelatedI install one server in my system(linux 5.0) and accessing that server through the 127.0.0.1 private ip address(lo). While i connect to a remote server for validating registry it gives me the error and unable to connect to remote server. here some of the files i give here in below to know my system network configuration
/etc/hosts
------------
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
127.0.0.1 cp.softidsolutions.org
[code]....
When I try to connect to my SUSE server from other one this appears: Remote host identification has changed. I deleted entry in know_hosts but it still working wrong, showing me this message. What could be the cause of this problem??
View 1 Replies View RelatedTrying to get OpenbavoPOS to connect to my remote Postgresql database, but so far i've only been able to connect to the local postgres installation. I _am_ able to access the remote databases with psql. I've read literally dozens of pages, and am pulling my hair out. I'm trying jdbc:derby.//192.168.15.10:5432/bravo I get back java.sql.SQLException no suitable driver found for jdbc:derby.//192.168.15.10:5432/bravo If I use jdbc:derby./root/bravo - all is OK, using a local database created in /root I have jdk installed on the client; does it need to be on the server also?
Server = CentOS 5.4 PostgreSQL version 8.1.21
Client = CentOS 4.8 PostgreSQL version 8.1.4
[code]....
have fedora 10 and am having problems with ssh. For some reason I can't connect via a remote host to my ssh. Local network connections do work just fine. I have been looking for a log of what is going on but have not had luck seeing anything.Things I have tried:
-Modify hosts.allow to allow ssh to all
-generated rsa1 key identity tryed specifying that with the -i option on the guest computer
[code]...
lpr: can't connect to remote host (127.0.0.1): Connection refused
[root@l-GZ:/]# usb 1-1: new full speed USB device using sl811-hcd and address 3
When I do a ntpq -p on my machine I could see the ntp servers configured and it's status:
But when I telnet to ntp server "10.1.35.2" it says A remote host refused an attempted connect operation:
I know * here represents that the machine is in sync with ntp server. My question if the machine is in sync with ntp server, how does it work?why ntp port 123 is connection refused?
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I have a box (boell) running Fedora 10 sitting behind a firewall at school. I am able to freely ssh to and from this box to other computers (minion) within that lan. Outside of this network I cannot directly ssh to boell - I must ssh first to minion, then I can ssh to boell. I've spoken with the sysadmin and he's verified that the firewall permits ssh freely - i haven't had any issues like this with other boxes of mine there, so this isn't any surprise.
I have verified that the hosts.deny file is blank, iptables permits ports 22 (and 80) and I didn't see anything obvious in the sshd_config. I tried a tcp dump on the external host and boell while attempting to ssh from the former to boell. The packets appear to be acknowledged by boell, but this fails to lead to a connection. I've tried this process with external hosts in different locations with the same result. I have made few modifications to the default installation for F10, so perhaps there is some default somewhere I have to change. In any case, below I have attached excerpts of germane files.
======== ssh from boell =======
[root@boell log]# ssh -vvv 71.189.5.67
OpenSSH_5.1p1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
[code]....
I have two Centos 5 servers one running Asterisk with PHP installed and another sever running as a MySql Database server, at the moment when I try run simple script to see if I can connect to the remote server I get the following error.Quote:Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
View 2 Replies View RelatedMy SSH client for remote machine will sometimes hang. I have to wait until the session is finished hanging, I guess, to login with SSH again. I would get some message about multiple users or something.
I haven't been able to login this time for over 1 day. It's started saying something about Tcl_InitNotifier: unable to start notifier thread. My host can access the machine locally to fix this, but what is going on? Why is this occurring?
Here is the login attempt:
Code:
i have made a java web server which works on localhost.but now i want to capable it handling many clients at a time.so clients running on different computer need machine name or IP address of server computer.How can i do this in java?
View 1 Replies View RelatedWe recently had a vulnerability scan done on our network and one of the vulnerabilities was that the dns server discloses the remote host name when using hostname.bind.
Is there any way that we can stop this from happening? Our name server is a Fedora 11 machine.
Is this possible that a process running on a remote-host only inform nagios when some thing is wrong. Rather then nagios-monitoring-server checking through NRPE every so often. Reason is I want to add too many alerts in the application. And I don't want a whole list of ok messages.
View 1 Replies View RelatedI've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
I was able to connect linux server on windows through putty.But now i am unable to connect that,I can able to ping that IP.SSH daemon is also running. shall i need to change anything in configuration file...
View 5 Replies View RelatedI installed Ubuntu 9.10 on a friends computer when Windows died on it, and though she has had relatively few problems with it, she still occasionally has problems that are really hard to impossible to fix over the phone. She is also not very knowledgeable with computers, so I was trying to guide her through setting up so I could connect to her remotely and try to figure things out, but I cannot get it to work.
I personally don't use Ubuntu on my computer, I use openSUSE and KDE so that does add to the problem, though I have used Ubuntu and Gnome a lot in the past.
I had her go to remote desktop settings and allow connections from other computers and allow other users to control the desktop, and at first I had her require confirmation and a password but it didn't work without it either. When I try to connect, it just hangs for a while then times out. I tried using KRDC and just VNC in the terminal with the same result.
There should be nothing on my side preventing a connection, but I am not positive. I am not very familiar with remote desktop outside of a LAN either. I am just trying to connect using her IP address, I don't know if there is anything else I need to include. Is there maybe some other setting that needs to be changed or maybe her DSL modem/router is blocking me though I don't know why it would, especially since P2P programs work fine.
I've recently been asked to setup our FTP server to accept connections from a remote host. They sent me a file "id_dsa.pub" with instructions to add this key to the xfer user.
Unfortunately I've no idea how to do this!
I'm running vsftpd 2.0.5 on Centos 5.3