Fedora Servers :: Getting Error Message When Trying To Connect To Vncserver 'unable Connect To Socket: No Route To Host (113)'

Apr 26, 2011

I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:

[code].....

The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?

View 4 Replies


ADVERTISEMENT

Ubuntu Servers :: Unable To Connect To System Bus: Failed To Connect To Socket

May 29, 2010

I tried to install vsftpd on my server and while the installation went fine, I can't run

Code:
restart vsftpd
As I the get error
Code:

restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with

sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.

View 4 Replies View Related

Fedora Networking :: Vpnc / Getting Error Unable To Connect, Socket Is Unavailable?

Aug 3, 2010

I am having problems accessing my work desktop through my home computer running Fedora 13. I am able to remote into work through MAC and Windows XP. I loaded vpnc and was able to connect to the concentrator. I also able to ping it too. I cannot connect to my desktop using rdesktop. I get error message �Unable to connect, socket is unavailable. I cannot ping to the desktop.

View 2 Replies View Related

General :: Ssh: Connect To Host 192.168.100.xxx Port 22: No Route To Host

Mar 9, 2011

I'm trying to ssh from my laptop to my desktop (both fedora 14) over a local network. I can ping my desktop and get responses, but if I ssh to it, I receive

ssh: connect to host 192.168.100.xxx port 22: No route to host

I can ssh from the desktop to itself.

View 4 Replies View Related

Ubuntu Servers :: ERROR 2002 (HY000): Can't Connect To Local MySQL Through Socket

Apr 2, 2011

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I've had this problem to the point where I thought I messed up my actual configuration so bad that I reinstalled Ubuntu to get rid of all the MySQL configuration; I ran MySQL through Windows with a breeze, but I'm getting some errors like that after restarting my computer just a few minutes ago and I have not changed anything in my SQL settings. I'm on Ubuntu 10.10 64 bit and running MySQL 5.1. the actual error that I get from Navicat and from the website is at [URL]... Update: 20110402. Connection for controluser as defined in your configuration failed. Just got that when I tried to log in to phpmyadmin.

View 4 Replies View Related

Server :: Connect To Address 10.0.0.100 : No Route To Host

May 12, 2010

i wanaa to config tlenet server and did the steps to enable it

but when i try to connect to server this error show :

telnet : connect to address 10.0.0.100 : No route to host
telnet : Unable to connect to remote host : No route to host

[URL]

View 10 Replies View Related

Ubuntu Servers :: Apache Virtual Host Unable To Connect

Jan 18, 2011

I've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.

What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.

Heres what I've done:

Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live

[Code].....

Live works fine, but dev cannot connect (as if there is no server there).

View 2 Replies View Related

Fedora :: Unable To Connect To Homehub / Understand Trace Route Output

Sep 19, 2010

I have be unable to access my bt homehub from another (external) ip address recently. I didtrace route to see what is happening to the connection and got the following.

It bounces around as it gets out my offices network and then seems to get to BT's servers and then I get stars. what that means?

1 - 8 bouncing round office network:
9 linx3.ukcore.bt.net (195.66.224.11) 19.405 ms 19.424 ms 19.381 ms
10 core2-pos0-1-5-0.ilford.ukcore.bt.net (62.6.201.121) 20.774 ms 21.099 ms 19.986 ms

[Code].....

View 4 Replies View Related

Ubuntu Networking :: Connect To Server - Getting "No Route To Host?

Jun 3, 2011

All I want is to be able to access files on one Ubuntu computer from another Ubuntu computer via a home wireless network. I have been at this for a week now. Scouring the web for answers and so far I have come up with this: Port 22 is open. I have both computers IP addr's via right clicking on the network icon-> Connection Information. ssh is installed and running. Both computers are listening on port22. But when I try Places->Connect to server, I get "no route to host". I'm not a networking guru and I'm at a complete loss on this.

View 9 Replies View Related

Fedora :: Error - Cannot Connect To Server Socket Err = No Such File Or Directory

Apr 29, 2011

What is the magic that needs to be done to be able to record in audacity?

- Fedora 15 x86_64 2.6.35.12-88.fc14.x86_64
- SoundBlaster X-Fi card.
-I have added rpmfusion to yum repos.

When I start audacity the following is printed to the concole:

Code:

Cannot connect to server socket err = No such file or directory
Cannot connect to server socket
jack server is not running or cannot be started
Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653

View 5 Replies View Related

Software :: Cannot Use Cvs Within Eclipse To Connect To The Server - ERROR Message - Could Not Connect To

Jan 23, 2010

I cannot use cvs within eclipse to connect to the server, but when I use cvs in terminal everything works fine.

ERROR Message: Could not connect to :extssh:hongyang@bleong.ndslab.net:/var/cvsroot: CVS communication error: org.eclipse.team.internal.ccvs.ssh2.CVSSSH2ServerConnection$SSH2IOException: Network is unreachable
Network is unreachable

View 6 Replies View Related

CentOS 5 Networking :: Error: Unable To Connect To Remote Host: Connection Refused, It Happens With Any Port

Feb 11, 2009

I'm trying to connect with my server via telnet, but when i sent the command (telnet xxx.xxx.xxx.xxx Port) doesn't works and shows then follow error: Unable to connect to remote host: Connection refused, It happens with any port. Is strange but my telnet services works (telnet xxx.xxx.xxx.xxx), In addition, i tried with firewall enabled and disabled and the problem still happens. My centOS run on virtualbox.

View 3 Replies View Related

Ubuntu Servers :: Error: 'Can't Connect To Local MySQL Server Through Socket '/var/run/mysqld/mysqld.sock' (2)

Apr 10, 2010

After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:

Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?

View 2 Replies View Related

Ubuntu Servers :: Upgrading From Mysql5.1 To Mysql5.5 - Get An Error :2002 : Can't Connect To Local MySQL Server Through Socket ?

Apr 28, 2011

how to upgrade from mysql5.1 to mysql5.5 version. Pls guide me in briefly.I did upgrade with the help of this url

http://www.ovaistariq.net/490/a-step...-to-mysql-5-5/ but i got error like this error:2002: Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2) when trying to connect FATAL ERROR: Upgrade failed

In /etc/my.cnf , i didnt get like this. Is this is the error
user = mysql; socket = /var/run/mysqld/mysqld.sock; port = 3306; basedir = /usr/local/mysql; datadir = /usr/local/mysql/data; tmpdir = /tmp; log_error = /var/log/mysql/error.log

View 1 Replies View Related

Ubuntu Servers :: ERROR 2002 (HY000): Can't Connect To Local MySQL Server Through Socket '/var/run/mysqld/mysqld.sock' (2)

Feb 27, 2011

I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:

Code:

root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock

[code].....

View 4 Replies View Related

Fedora Networking :: Using Putty To Connect To A Machine / Host Name And Port To Connect?

Jul 23, 2010

Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?

View 6 Replies View Related

Red Hat / Fedora :: Using Vncserver To Connect From Windows Desktop

Sep 13, 2010

I'm using vncserver to connect Linux from Windows Desktop. When i open the vncsession cursor is not moving continuously i.e i need to press one by one. I'm using KDE desktop for linux.

know the settings to move cursor continuously when i press/hold the key.

View 1 Replies View Related

Red Hat / Fedora :: Remote Desktop - In Services Vncserver Get Message - Unable To Open Display

Jul 22, 2009

Well this is my first time using redhat 7, the install went fine and webserver, mysql, phpmyadmin are all working......great

The only problem i have is the remote desktop

I have set the password in preferences/remote desktop run command vncpasswd and set password

In services vncserver i get this message......... xsetroot: unable to open display '' Xvnc is stopped and vncserver failed. The error was: xsetroot: unable to open display '' Shutting down VNC server: 1:user1[FAILED]

Starting VNC server: 1:user1 [FAILED]

My vncservers file looks like this

I have tried restarting service using root login and user1

View 5 Replies View Related

Red Hat / Fedora :: Telnet - IP - Is Giving Unable To Connect To Remote Host - Connection Refused

Nov 26, 2010

I am doing some R&D on 11g RMAN in oracle at home. i have installed oracle enterprise linux and i have installed oracle software. when i am trying to configure listener, it is error-ed out. i have verified that telnet with the port is not working and i am seeing connection refused error.

View 3 Replies View Related

Ubuntu Servers :: Smbd. Failed To Connect To Socket?

Nov 21, 2010

I have a new install of Ubuntu 10.04.1 LTS server. But I get errormessages trying to start samba.

caesar@klem:/etc/samba$ restart smbd
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory

I have tride to remove an install samba. And deleted smb.conf. And startet with the original.

smb.conf:
workgroup = Easyways
server string = %h server (Samba, Ubuntu)
log file = /var/log/samba/log.%m
max log size = 1000

[Code]....

View 2 Replies View Related

Fedora :: MYSQL Error 2002 (HY000): Can't Connect To Local MySQL Server Through Socket?

Feb 22, 2011

I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)

When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.

Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.

Howver, just been trying to again to fix the problems with downgrading mysql and get:-

Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14

View 7 Replies View Related

Red Hat :: Error 'Can't Connect To Local MySQL Server Through Socket'

Feb 28, 2011

when i tried the command mysql -u root it is giving me an error that "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)" although my mysql server is ruuning beacuse i m using XAMMP server and its inbuild mysql server is running i cannot use service mysqld start command beacuse this command try to start another instance of mysql and i required mysql of XAMMP.

View 3 Replies View Related

Programming :: Script - If Telnet Root Hostname Fails Then Try To Ssh In - Error "Unable To Connect To Remote Host: Connection Refused"

May 11, 2010

I'm trying to make an SSH script for my place of employment. This script, I want to go out to the server hostnames we have specified (in another file) and change a users account password. We use Kerberized telnet, so if telnet root hostname fails, I want it to use ssh username hostname and use the old password (specified). If both fail, I want it to ask the user what the port should be and input the port in the ssh command.

But I'm having a issue having it try telnet root hostname and if it fails then, try to ssh in, I have no clue how to have it proceed. Is it an if statement? Here's the telnet failed message: telnet: Unable to connect to remote host: Connection refused

View 7 Replies View Related

Fedora Servers :: Unable To Connect To The Postgresql

Jun 21, 2009

I have recently Installed Fedora 11. I have installed postgres like yum install postgresql but I wonder there is no user created for postgres when I tried su postgres system says, no identity for user postgres. even when I tried to connect postgres server using psql then it says

Code:

psql: could not connect to server: No such file or directory

Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"?

View 1 Replies View Related

Fedora Servers :: Unable To Connect To The Localhost

Jul 13, 2009

I'm trying to connect to url, but the browser is unable to connect to the localhost; my OS is F11, if someone have encounter this problem? i was able to connect to the localhost when i had F6 OS.?

View 3 Replies View Related

Fedora Networking :: Mount : System Error: No Route To Host

Sep 3, 2010

I am trying to share directories between two F12 machines on a local network with a router box doing DHCP because not all machines on all the time. Web access is fine and local ping and ssh works but telnet doesn't. I have never succeeded doing mounts. So I have been searching for things to fix the above and have just tried rpcinfo. If I do this :

rpcinfo -p 192.168.2.2 it gives rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host. Does that suggest that actually there is an installation problem? So I tried "yum provides portmapper" and that gives "No Matches found".

View 14 Replies View Related

Ubuntu Security :: ERROR 2002 (HY000): Can't Connect To Local MySQL Server Through Socket

May 9, 2011

I have installed the mysql server on my ubuntu. I need to assign or reset the root password. I followed the article at http://www.ubuntugeek.com/reset-the-...-on-mysql.html. When I ran the command

[Code]....

ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) what am i doing wrong, and explain to someone who almost has no experience with ubuntu. I am new to this.

View 1 Replies View Related

Server :: Unable To Connect To Remote Host

Jun 4, 2011

I installed dovecot on my server and now the imap and pop3 ports are open.But when I want to telnet it, it's not possible.Code: Trying 127.0.0.1...telnet: Unable to connect to remote host: Connection timed out.Also I can't any ports else. But I can connect to it from other computers. I tried to connect to this from my PC and it was successful.

View 7 Replies View Related

Fedora Servers :: Unable To Connect To The Share From Windows Machine

Jun 14, 2011

Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.

I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:

[Code].....

3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.

Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command

[Code].....

View 6 Replies View Related

General :: Error Message: Vncserver: Unrecognized Service

Jan 2, 2010

I have installed package tigervnc-1.0.0-3.fc12.i686, but when I am trying to start it: service vncserver start it comes back with following message: vncserver: unrecognized service.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved