Software :: Cannot Use Cvs Within Eclipse To Connect To The Server - ERROR Message - Could Not Connect To
Jan 23, 2010
I cannot use cvs within eclipse to connect to the server, but when I use cvs in terminal everything works fine.
ERROR Message: Could not connect to :extssh:hongyang@bleong.ndslab.net:/var/cvsroot: CVS communication error: org.eclipse.team.internal.ccvs.ssh2.CVSSSH2ServerConnection$SSH2IOException: Network is unreachable
Network is unreachable
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
every time I try to connect to the ftp server I setup i am recieving this error Response:*** buffer overflow detected ***: /usr/sbin/vsftpd terminated Error:Could not connect to server
Connect debounce failed port 3 disabled. i get this in the terminal (alt+f1) every time i log on. i like this terminal better than the standard one and i want the error message to stop appearing every time i try to type something.
I try to connect to my server (whose IP is x.x.x.x below) from my laptop. I have no idea why openvpn client won't work this time. It works fine in win7 before. I re-installed openvpn but it doesn't work neither. Then I searched for this issue, find that it is possibly caused by disabled DHCP Client service. I checked, and found it was enabled. Still won't work after restarting dhcp client service.
Basic Info: OS: Windows 7 OpenVPN client: openvpn-2.2.0 DHCP Client Service started.
The following is the log during connecting:
Code: Wed Jun 08 01:55:16 2011 OpenVPN 2.2.0 Win32-MSVC++ [SSL] [LZO2] built on Apr 26 2011 Wed Jun 08 01:55:16 2011 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Wed Jun 08 01:55:16 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Wed Jun 08 01:55:16 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables [Code]....
Is there any way to do remote desktop from Mac (Snow Leopard) to Centos 5.5?I have turned on remote desktop in Centos and got the address ([url].....) to access remotely. Then I installed vnc-Viewer in my Mac. Put the address like (mypcname.com:0) then clicked connect. I get error message "Failed to connect: Operation timed out (60)".My Mac and Cenotos is in the same network.
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main deb-src http://ftp.rediris.es/debian/ squeeze main deb http://security.debian.org/ squeeze/updates main deb-src http://security.debian.org/ squeeze/updates main deb http://ftp.rediris.es/debian/ squeeze-updates main deb-src http://ftp.rediris.es/debian/ squeeze-updates main
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
trying to connect to a NXserver across internet, it won't connect.I'm getting to this point at "time out"
203 NXSSH running with pid:2163 285 Enabling skip of SSH config files 285 Enabling check 0n switch command 285 Setting the preferred NX options
If I do a "ssh tom@76.254.20.238" I can connect to Server and tom /home. In ~/.nx the only two directories there is Config and Temp and in Temp there is three files , numbered 3112 6900 6903.
I have implemented SugarCRM on a SUSE 10 box . Every thing goes ok but in the SugarCRM ,it's saying : Error: Could not connect to the Sugar Server. Please check your Proxy Settings value in the System Settings admin panel. Last attempted connection @ 10/11/2010 06:37pm and unable to setup email inside that. But the system is neither have proxy setting and internet runs fine outside SugarCRM. In RHEL, CentOS all run ok but not in SUSE ?
I am getting this error when I try to connect to my MySQL database from a PHP page. MySQL is working fine on it's own and PHP is working on it's own. "Fatal error: Call to undefined function mysql_connect() in /usr/local/htdocs/test.php on line 11" I have found instances on the Internet where other people had the same problem but from everything I've read, none of it appears to do anything for me. I have read that I need the "extension=mysql.so" in my php.ini file and to uncomment it but it's not in there and I don't even have the "mysql.so" file. Many people have said to install the MySQL "devel" package, which I have also done and it is still not adding the file. (Tried "rpm -i php-mysql") I have also tried running the PHP ./configure again with the "--with-mysql". After all of these I still can't seem to get any further than I was when I found out I had a problem
We have Exchange as our Mailbox server > Qmail as our SMTP server > and we use postini for filtering. We recently got word from a customer that he received a "451 error - can't connect to server" message from Postini - stating that the server is unreachable. This does not happen often so obviously Postini can connect to the qmail server. Are there logs that I can look at to find out why and when these would occur?
I am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See # ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
I've tried /etc/init.d/mysql start, and it actually starts, or at least, it doesn't error out. But when I do pgrep mysql I get nothing, and when I try to login with mysql -p as root, I get
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
None of my other logins work, either, but since pgrep mysql didn't work, it's clear that MySQL just isn't running. I tried uninstalling and reinstalling mysql-server via apt-get, but I get the same thing. The logs in /var/log/syslog show this:
Apr 11 14:31:26 /etc/init.d/mysql[9774]: #007/usr/bin/mysqladmin: connect to server at 'localhost' failed Apr 11 14:31:26 /etc/init.d/mysql[9774]: error: 'Can't connect to local MySQL server
In Gnome Places->Connect To Server dialog, I am having problem using the Custom Location Service Type. I enter in the URI as
Code:
smb://username:password@ipaddress/share_name
I get an pop up error message that says:
Quote:
Cannot Connect To Server. You must enter a name for the server.
Which would be fine if there was actually a place for me to enter the name which there is not. What am I doing wrong. This is the first time I have tried using the Connect To Server dialog. Normally I just use a script I wrote to mount my share in a folder on my local drive as some programs cannot access the mounted network folder. In a browser all I have to do is:
Code:
smb://ipaddress/share_name
I tried using Windows Shares, but that did not work either. It does work if I click on network and access the share that way, but some programs like firefox and a few others that I want to save a file to my network drive do not show the network unless the share is mounted in a folder. So, I wrote a script:
I have openssh installed and it works great right out of the box. However, I don't want people accessing everything on my machine. My machine is behind NAT and ufw firewall. I have configured both so that port 22 is open. I've added the new users I want to have limited access and assigned them to group "sambashare" (just because its convenient.)
When the bottom bit of my config file "/etc/ssh/sshd_config" is set as shown below, everything works great:
Quote:
#Subsystem sftp /usr/lib/openssh/sftp-server Subsystem sftp internal-sftp UsePAM yes Match Group sambashare
[code]...
Whenever I make the change to enable "ChrootDirectory" so that it limits the users access, I simply remove the # and it looks like this:
Quote:
#Subsystem sftp /usr/lib/openssh/sftp-server Subsystem sftp internal-sftp UsePAM yes Match Group sambashare
[code]...
However, thats when I start running into problems. When I try logging in with Filezilla; I am not able to connect and this is the response I get from Filezilla:
Quote:
Status: Connecting to ##.###.###.###... Response: fzSftp started Command: open "user@##.###.###.###" 22
I have implimented SugarCRM on a SUSE 10 box . Every thing goes ok but in the SugarCRM ,it's saying :
Quote:
Error: Could not connect to the Sugar Server. check your Proxy Settings value in the System Settings admin panel. Last attempted connection @ 10/11/2010 06:37pm and unable to setup email inside that. But the system is neither have proxy setting and internet runs fine outside SugarCRM. IN RHEL,CentOS all run ok but not in SUSE ?
when i tried the command mysql -u root it is giving me an error that "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)" although my mysql server is ruuning beacuse i m using XAMMP server and its inbuild mysql server is running i cannot use service mysqld start command beacuse this command try to start another instance of mysql and i required mysql of XAMMP.
What is the magic that needs to be done to be able to record in audacity?
- Fedora 15 x86_64 2.6.35.12-88.fc14.x86_64 - SoundBlaster X-Fi card. -I have added rpmfusion to yum repos.
When I start audacity the following is printed to the concole:
Code:
Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started Expression 'stream->capture.pcm' failed in 'src/hostapi/alsa/pa_linux_alsa.c', line: 3653
I get this error ALL THE TIME after a reboot if I try to print. Going to the printing applet to add the printer does no good because Lucid is not connected to the CUPS server. I found that the work-around below fixes the issue for the current session.
I have FileZilla installed on this machine, and OpenSSH (with an open port 22) on another machine on my home network. When I try and connect, I get: Quote: Status:Connecting to 192.168.2.3... Response:fzSftp started Command: open "alphatwo@192.168.2.3" 22 Error:Connection refused Error:Could not connect to server
Which has left me puzzled as I have an open port. Does the username have to be defined somewhere? E.g. the machine acting as my SFTP server can be logged on to locally as alphatwo so that's what I logged in as (with the correct password). Is this correct? If so, does anyone have any ideas as to how I might rectify it? I want SFTP set up so I can copy PHP files from my laptop to /var/www/html/ on another PC (across the home network).
I am using fetchmail (with ssl support) to download my e-mail. About a week ago, the downloading from two servers stopped, among them gmail.com, due to an ssl error. Usually that means updating the ssl fingerprint in fetchmail.conf, and when I wanted to do this I discovered that there seems to a issue with openssl.
When I do openssl s_client -connect pop.gmail.com:995 -showcerts I now get an error
Ubuntu 10.x servervsftp mysqlwebmin Apache2I am running the Ubuntu server on the same 192.169.x.x subnet as the PC I am using to test vsftp and webmin and Apache.I can connect to the Apache web site hosted on the Ubuntu server but I cannot connect to any other service -- i.e. port 21 or port 10000 or 3306.Netstat shows:
I have installed the mysql server on my ubuntu. I need to assign or reset the root password. I followed the article at http://www.ubuntugeek.com/reset-the-...-on-mysql.html. When I ran the command
[Code]....
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) what am i doing wrong, and explain to someone who almost has no experience with ubuntu. I am new to this.