Debian :: Unable To Connect Or Ping Server In DMZ?
Apr 8, 2011
I'm trying to run Debian server in our network. We have SSG5 Juniper Firewall set up to route traffic from our trusted network 192.168.50.0/24 to our DMZ 93.153.125.224/28I can connect / ping all Windows servers which are in DMZ. When I try to connect my Debian server instead of one of the server's static IP I'm unable to connect or ping to it. The server itself is able to connect to internet resolve DNS if I allow connection to our trusted network I'm able to ping or connect to any computer in trusted network but still unable to ping from trusted to DMZ. The SSG5 policy is set up to allow any connection from trust to DMZ and interface is set up to route all traffic.I have tried to trace the ping It'll go through firewall right to the interface needed but then it'll time out as like the server is not connected at all.
View 1 Replies
ADVERTISEMENT
Jun 4, 2010
Tried turning firewall off, i tried port forwarding tcp port 22, but it still doesn't work. Also am unable to ping modem over WAN, i can ping the modem locally though. Tech support claims pinging and ssh is not part of the internet so they wont support it in any way.
View 6 Replies
View Related
Mar 30, 2010
I have set up UEC on a single machine 64 bit blade. I have followed the steps as per the documentation.I am using Managed NOVlan mode. I have installed the Karmic kola image. When I try to run the instance, I get an error "no resources available. Try --addressing private". When I try addressing private, an ip address 172.19.1.2 is assigned and the instance was running.
a) When trying to ping the ip, error displayed that the host is unreachableb) I am also unable to connect to ubuntu@172.19.1.2 using ssh. Error message is displayed that " No route to host".I have searched the forums but couldnt find any solutionPS: I suppose everyone is very busy. I see very limited responses to posts. Sharing your experience and expertise will be helpful for all and will reiterate the meaning of ubuntu
View 1 Replies
View Related
Feb 26, 2011
I just setup a new LAMP server (CentOS 5.5 x86_64) box with channel bonding on NetXtreme II BCM5709 Gigabit Ethernet (IBM x3650 M3). The problem is I wasn't able to connect to this server when I'm in different VLAN's. This server also unable to ping different VLAN's. But everything works fine when I transact in the same VLAN.Here's the config:
Datacenter VLAN = 9
Firewall = Disabled
SELinux = Disabled
[code]...
View 10 Replies
View Related
May 31, 2010
Strange things are happening today to my pc with debian squeeze 2.6.32-3-amd64 kernel.
It can connect to internet via my wirelss rt2870 driver (Ralink, Belkin usb wireless). But I cannot ping any of my other computers in the home network (served by a Belkin N+ wireless router). Other computers can ping it.
I am also connected via ethernet directly to another desktop. Last night I can access the shared file (samba windows share) in this other computer, using ethernet (disabling wireless). Today I cannot. I cannot even ping it or any computer, or itself.
I am using network manager with this interface:
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
View 14 Replies
View Related
Dec 26, 2010
I created an account called adminftp on a local Linux server Centos.Added this user to FTP group.When I use Filzilla from another computer in the same network, it cannot connect to the server but I can ping to the server.
View 6 Replies
View Related
Jul 9, 2011
I have a linux server.I am not able to ping this server.The message that I am getting when I try to ping this server from my machine is
Pinging 172.26.134.167 with 32 bytes of data:
Reply from 172.26.134.176: Destination host unreachable.
Reply from 172.26.134.176: Destination host unreachable.
[code]...
View 2 Replies
View Related
Oct 15, 2009
As the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
View 14 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
Jan 13, 2011
I am able to traceroute but unable to ping a external mail server ? What could be the reason ?
View 3 Replies
View Related
Jul 12, 2010
I have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
View 6 Replies
View Related
Sep 27, 2010
i have installed linux debian in my computer but i have aproblem , i have a ping only on my computer itself , not to gateway or other computers on my network .
Ip : 10.0.88.9
Gateway : 10.0.88.1
dns :10.0.88.7
note:when i have installed system i have no internet connection so it is not installed updates
View 1 Replies
View Related
May 4, 2010
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
View 9 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Jun 30, 2011
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
View 16 Replies
View Related
Apr 29, 2010
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies
View Related
Apr 6, 2011
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
eg:
View 7 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Jul 28, 2010
I am not able to connect samba server from other linux pc giving error: NT Authentication Failure
But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.
View 3 Replies
View Related
Apr 1, 2011
I'm a new debian user. I install a Debian in Virtualbox, and try to connect to the source list to update, but it can't connect to the server, while network and internet connection works. This is my sources.list
deb http://ftp.rediris.es/debian/ squeeze main
deb-src http://ftp.rediris.es/debian/ squeeze main
deb http://security.debian.org/ squeeze/updates main
deb-src http://security.debian.org/ squeeze/updates main
deb http://ftp.rediris.es/debian/ squeeze-updates main
deb-src http://ftp.rediris.es/debian/ squeeze-updates main
View 2 Replies
View Related
Jul 12, 2011
I run my own mail server. There's only one part that isn't working and I can't seem to figure out why: sending mail from a client - in this case, Thunderbird.
I can send mail off-server just fine if I log in via telnet. I can receive email just fine with Thunderbird.
Here are my relevant configs:
/etc/postfix/main.cf:
Code:
queue_directory = /var/spool/postfix
message_size_limit = 102400000
mailbox_size_limit = 1024000000
command_directory = /usr/sbin
[Code].....
View 3 Replies
View Related
May 3, 2010
host - Ubuntu 9.10VM - Debian 5.04Sun vbox$ cat /etc/network/interfacesauto loiface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
[code]....
View 2 Replies
View Related
Jul 20, 2010
I'm currently using Ubuntu and have installed debian using dual boot. In debian neither my wifi card appers nor LAN interface appears. I think during installation I'm not able to install the drivers. Can anyone help me to download the driver packages for debian (than I can download in ubuntu and then use pen drive to install in debian).onsider that I'm completely new to debian and have been using ubuntu for 2 months now and is familiar with packaging.
View 12 Replies
View Related
Nov 27, 2009
I'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
View 5 Replies
View Related
May 11, 2010
I am not able to connect to the Remote VNC Server..Error: ConnectToTcpAddr: connect: Connection refused.
View 6 Replies
View Related
May 22, 2010
I'm having a real problem with intermittent ssh disconnections?It's the same thing regardless if it's over ethernet or wireless, and nfs shares don't have any problems at all.
View 1 Replies
View Related
Apr 6, 2010
I am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
View 1 Replies
View Related
Jul 27, 2009
I install one server in my system(linux 5.0) and accessing that server through the 127.0.0.1 private ip address(lo). While i connect to a remote server for validating registry it gives me the error and unable to connect to remote server. here some of the files i give here in below to know my system network configuration
/etc/hosts
------------
127.0.0.1 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
127.0.0.1 cp.softidsolutions.org
[code]....
View 5 Replies
View Related
Apr 1, 2011
I have Squid 2.5 stable3 in a RedHAt machine, the problem i have is that i can't connect to an FTP site, i got the squid screen:
An FTP authentication failure occurred while trying to retrieve the URL: [URL]
Squid sent the following FTP command:
PASS <yourpassword>and then received this reply User anonymous cannot log in.Your cache administrator is root.
I'm able to browse anonymous FTP sites like ftp://ftp.ea.com, but not any with authentication.
i have setup
acl FTP proto allow ftp
http_access allow ftp
but still can't connect. I also can't connect to secure port 443 for an application in th network.
when i connect the machines outside te SQUID i can use the ftp and secure ports.
View 2 Replies
View Related
Aug 5, 2011
On the server having live ip address, I have installed vnc server using:
yum install vnc-server
yum groupinstall "X Window System" "GNOME Desktop Environment"
yum install xinetd vnc-ltsp-config
/sbin/chkconfig xinetd on
/sbin/chkconfig vncts on
/sbin/service xinetd restart
On my local machine connected to internet via LAN, I have installed vnc viewer using: yum install vnc When I connect to the vnc server using vncviewer ipaddressofvncserver:1 it shows unable to connect to host. No route to host (113)
View 3 Replies
View Related
