Server :: Unable To Connect To Webserver From Outside Network?
Feb 22, 2011
I have a Ubuntu server (10.10) setup with apache and is being port NAT'ted via firewall from outside to the webserver.I am able to access the webserver from inside LAN but not from outside. NATs are working fine because I can see the traffic come through on tcpdump but the webserver will not respond to the request from outside ip address.Here are the tcpdumps.
10:11:58.939005 IP 12.xxx.xxx.6.10146 > 172.16.2.100.80: Flags [S], seq 3098920688, win 65535, options [mss 1380,nop,nop,nop,nop], length 0
10:12:01.898852 IP 12.xxx.xxx.6.10146 > 172.16.2.100.80: Flags [S], seq 3098920688,
[code]....
View 4 Replies
ADVERTISEMENT
May 22, 2010
I'm having a real problem with intermittent ssh disconnections?It's the same thing regardless if it's over ethernet or wireless, and nfs shares don't have any problems at all.
View 1 Replies
View Related
Dec 18, 2009
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
View 1 Replies
View Related
Jan 21, 2011
I have Ubuntu 10.04 x86 installed, trying to get teamspeak 3 beta30.I have followed this guide: http://robert.penz.name/296/howto-in...u-10-04-lucid/
And can not get my network setup correctly to allow people to connect externally from my LAN. I have forwarded every relevant port I could find to the computer hosting TS, I forwarded them first as their respective protocols, and then as the combined UDP/TCP. I tried Forwarding single port numbers, and then port ranges.I have also tried uninstalling selinux.I have tried connecting directly to my cable modem with the server.I had this working perfectly three months ago with all the same software, using the same guide I listed above.The only thing I can imagine has changed is my operating system itself with system updates.
My network looks like:
Comcast cable modem--->Netgear WNR3500L Router----->Ubuntu 10.04 x86 desktop edition
what else I could possibly check? I can connect to and manage the TS server fine using localhost:9987 or 192.168.1.x:9987, it just wont allow any connections from outside the network.
View 4 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Aug 9, 2010
I am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
View 3 Replies
View Related
Nov 21, 2008
I'm unable to connect to a particular home wireless network under Fedora 9, although I can connect to it using WinXP on the same machine. My Fedora installation is able to connect to my college's unsecured wireless network, so it's not a driver issue I think.It seems to be an authorisation issue, as I'll describe below, but there's one other thing that's bothering me. The SSID for the network I have problems with is for some reason not listed in Network Manager's drop-down list, nor is it in the output of iwlist wlan0 scan. But I'm pretty sure it's not a "hidden" network - I don't know exactly how those work, but I helped the owner of the wifi network in setting it up, and don't remember doing anything that would make it hidden. As far as I can remember, Windows found the network automatically without having to be told the SSID. What's the best way to confirm whether it's a hidden network or not?
Anyway, I try to connect by selecting connect to other wireless network in Network Manager, and entering the SSID. As far as I can tell from the error messages below, the machine does contact the network and attempt to connect, but I'm not authorising myself properly. That may be a completely wrong diagnosis, but hopefully someone can see from the below info whether it's correct or not.I'm not sure which option to use for "Wireless Security": at the time we set up the network, it gave us a Hex WEP key of 26 characters, which is 104 bits. But none of the options in Network Manager's list match that. Here are the options it has, and the error message I get with each one:None - if I select this, it fails to connect, with no error message.
WEP 128-bit passphrase - if I select this and attempt to use my 26-character WEP key, it brings up a new dialog, saying "Passwords or encryption keys are required to access the wireless network [SSID]." It has a drop-down box labelled "Wireless Security", but this time the only option is "None", and the connect button is disabled, I can only click cancel.
WEP 40/128-bit hex - as above.
WEP 40/128-bit ASCII - The connect button is disabled when I try to use the WEP key, as the string is too long. Despite the fact that it says 40/128-bit, it actually accepts 5 and 13-character strings (40 or 104-bit). Since I've got a 104-bit hex key, I tried converting it to ASCII, but it consists of mostly unprintable characters, so I'm not sure there's any way to actually enter it into the textfield. I might have done something wrong here, so I've put my code below to see if anyone can point out a mistake.
LEAP - requires a username, not applicable here I think. Windows doesn't need one, and we don't have one from when we set the network up.Dynamic WEP (802.1x) - requires username, private key and various other things, all N/A WPA & WPA2 Personal - Brings up a dialog with the same text as for "128-bit passphrase", but this time "WPA & WPA2 Personal" is the only option in the drop-down list, instead of "None". It asks for a password, so I just enter the hex key again - now it asks for the password for the Gnome Default Keyring, which I don't think I've ever set up. Don't know if I can go any further with that, but my understanding is that since we were given a WEP key when we set up the network, WPA will be N/A.WPA & WPA2 Enterprise - as Dynamic WEP. N/A.Hopefully that's enough info that someone can help diagnose the problem. Some of the behaviour of Network Manager described above doesn't make sense to me, and I'm wondering if it's buggy.
View 14 Replies
View Related
May 4, 2010
I'm trying to setup PS3 media server on my new OpenSuse 11.2 and I'm being unable to connect to the PS3. The multimedia server seems to being working ok, only it has not appear on XMB.
I've been searching on PS3 Media Server forums and try a couple of solutions regarding /etc/hosts and adding full qualified domain name of server to it, but it doesn't seems to work.
View 9 Replies
View Related
Feb 28, 2010
I installed debian server on a custom built intel computer, with a 2.5 ghz dual core processor, 3 Gb of ram and a 500 GB sata hdd, I had originally installed debian server to use it as a web server, but for some reason after a few hours it completely freezes, mouse wont move I cannot connect to the webserver or ftp server, I restarted it and it will do it again, it isnt a specific amount of time it just does it randomly sometimes it will take 2 hours another time it will take 2 days, anyone know what could be wrong, I am quite new to linux and am not sure exactly how to view logs and such.
View 1 Replies
View Related
Oct 25, 2010
I am not able to connect to network after update F13 to 2.6.34.7-61. Because there is "no netwokr decvice" IAW network manager. There is nothing in system log that abonormal. But, there is a fail initialization in the boot message. "applying firewall rules: iptable v1.4.7:Ip6table-restore: unable to initialize table .filter error occur at line 3 try Ip6table-restore -h or Ip6table-restore -help for more detail"
so, I tried the comment at terminal with root clearance, it just give some feed back about how to use this command. When I tried out other options. none of them work. There is no feed back form the terminal other than previous display and blanking cusor.
I assume it was the firewall preventding me to connect to network. And I complete disable SELinux and reboot. Problem remain, no network device. Check network device driver. There all inplace. Tried using old kernel, unble to boot up X window, presumably old driver has been deleted.
BTW, after two consecutive update failure (2.6.34.7-54 kernel panic VFS? problem, 2.6.34.7-61 no network connection), I assume Fedora Quality should consider review their update release process. Since the probability of fedora releasing bad update is increase a lot after fedora 11.
View 10 Replies
View Related
Dec 18, 2009
I installed 11.2 on an older HP Laptop which was running XP without any issues. Durring the install, the update processe failed (presumably unble to connect to respository). I am usind a wired connection and the nic is connecting to my router and is recieving an address via DHCP. I am also able to ping the workstion from the router's Web interface. However I am unbale to connect to the internet.I have turned off the Suse firewall via Yast and checked the settings against another computer running ver 11.1 .Everything appears to be correct but no joy.
View 9 Replies
View Related
May 4, 2011
When I try to update with YaST2 or zypper it complains about being unable to connect to the repo's
I'm getting this error with all repo's except for one i've added manually (google chrome)
Am I doing something dumb or are the actually down?
is there a shortcut to open konsole?
View 3 Replies
View Related
Apr 16, 2010
I see the network applet in the panel which shows that I am connected but I cannot access the net. I found out that I had to do this in firefox
about:config --> IPv6 --> disable.IPv6 true
With this tweak I was able to connect to the net. But when I use the Update Manager or Synaptic I am not getting connected, even if I use the cli and do
Code:
apt-get update: I cannot connect. When I do
View 7 Replies
View Related
Jun 21, 2010
IWithout having made any configuration changes (that I am conscious of), for the past few days I have been unable to connect to my home network - and hence to the internet.My 64-bit Kubuntu (10.4) is on a dual boot machine.If I boot XP then things work as they have done for the past year or so - no network connection problems at all. So I know it's not hardware, LAN or router/cable-modem related. In addition none of the other systems on the network have a problem.
I tried to check if there are some firewall settings that might have changed - but cannot seem to find anything about the firewall in my Kubuntu set-up. Indeed I cannot figure out how to do any problem source identification.
View 1 Replies
View Related
Jul 4, 2010
I give up.. after an hour trying to get my HP 7600 to network connect
My main box is usb connected to my HP Photosmart 7600 and works fine, my daughter has her winxp box connected to it over network as well. My wife's Ubuntu box (same OS and version as mine 9.10) CANNOT connect in any way, shape or form. I've tried every protocal, port, helper program (hp-setup, cups local webpage etc..) and nothing. I have the printer shared.
why connecting to a network printer in the same OS and version would take so much work?
Also we're all on the same network, & subnet with no filtering or firewalling in between the boxes.
*resolved* After trying everything else I restarted cups on the box the printer is attached and everything mysteriously works.
View 1 Replies
View Related
Jul 5, 2011
I recently installed and now my wireless Internet isn't working.have a Dell Inspiron 1545 laptop, with the 1397 wlan mini cardI have read through other threads, but I was unable to solve the problem I am having (Stated below).I just installed ALL updates available and plugged in my computer to connect to the Internet.Now the wireless option is there, and so is my network, but when I select it, nothing happens
View 9 Replies
View Related
Feb 14, 2010
I have a network of 5 Windows Machines and 1 Linux Server. I created a Filemaker Pro Database on a windows machine and share it with the other machines through web publishing (only locally). - On any Internet browser, they only have to go the IP of the computer hosting the database - http://192.168.1.99:120 to enter & use the database, and all the other windows machines connect perfectly.
However, when I type the same IP(+port No.) into Firefox on my Linux computer, it can't reach the windows computer with the database (It just times out). Is there a firewall preventing it from connecting to other computers on the network, or do I need to update firefox or run another Internet browser or install Samba? I don't have much experience with Linux, as a programmer set the server up for me, so a simple solution with as little programming as possible would be fantastic.
View 6 Replies
View Related
Feb 23, 2010
recently installed ubuntu 9.10 on my HP pavalion DV4 laptop all the things are working fine except wireless connection. I am unable to connect to the wifi network.
View 4 Replies
View Related
Sep 14, 2010
I just want to be able to send emails through my webserver, setup. I couldn't find a dev forum - so thought i'd post here. I'd like to be able to send emails (form my localhost setup) to and from my global client, namely: ( ***@yahoo.com), using PHP and Apache. A snippet from my php.ini file looks like:
Code:
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://php.net/sendmail-path
sendmail_path = /usr/sbin/sendmail -i -t
sendmail_from = example@yahoo.com
Now, I never could get this working in Windows, let alone Linux. I could do with it working though.
View 9 Replies
View Related
Apr 17, 2016
Recently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
View 1 Replies
View Related
May 9, 2009
O currently have 2 USB WiFi adaptors: a Linksys WUSB54G v4 and a D-Link DWA-110. Both these USB adaptors worked extremely well in Windows: they could connect to any network: unsecured, WEP and WPA1/2I have tested these adaptors in DreamLinux, OpenSUSE and Mandriva: in these 3 distributions, i could use both adaptors to connect to my home's WPA2 network.Both adaptors also work well in Fedora 10.In Fedora 11 Alpha though, its a different thing: only the D-Link is able to connect to the home WPA2 network. My Linksys WUSB54Gv4 can 'see' the network, but when i enter in the WPA2 key, it takes forever to try to negotiate a connection before timing out and disconnecting.
View 3 Replies
View Related
Jul 15, 2010
I did a fresh install,I also enable the networkmanager.after installation,my wireless unable to connect to my router . when I click to connect , it prompt for password then after that nothing happen.
View 8 Replies
View Related
Feb 18, 2010
Just purchased a Dell Inspiron 580 MT tower pc with Windows Professional. However unable to connect to the network or the internet when I load a copy of Ubuntu Karmic on dual boot. Windows networking and internet working fine. Is this an ethernet adaptor hardware issue? Broadcom NetXtreme 10/100/1000 Gigabit Ethernet controller-PCI Express card Will try later connecting through a usb ethernet adaptor to see if this is really the problem.
View 2 Replies
View Related
Mar 6, 2010
I am using Belkin router and i connect with MAC ID only. When i connect with my Vista it works properly but when i reboot and try to connect with Ubuntu it's not connecting.
I looked for my Ubuntu mac id and i added that also but no use. It says it's connected and when i try to google it, the page not found
View 3 Replies
View Related
Mar 31, 2010
This is baffling me but I am easily baffled/baffeld? I carefully followed these instructions to install a a working driver http://ubuntuforums.org/showthread.php?t=760568. It all went fine, my wireless light came on and it detected my wireless network. I know my WPA2 code (I can connect on the same computer in windows 7) and my keyring code. but I still can't connect it whirs away for quite a while before giving up and saying not connected.[Code]....
View 5 Replies
View Related
Jul 31, 2010
Take a look to see the history of my issue. [url]
So this is the PC ID: 14e4:4315 from the BCM4312
The graphical option through the hardware drivers list 2 options, broadcom b43 wireless driver and the broadcom sta wireless driver None can be activated
The b43 displays: Sorry, installation of this driver failed.
Please have a look at the log file for details: /var/log/jockey.log
The sta displays:
Just gave another try withe broadcom driver [url]
But can not make it to work.
View 1 Replies
View Related
Oct 23, 2010
I bought a new desktop Lenovo and got problem: I can`t to connect to my local network
Some output:
Code:
$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
[code]...
I tried ifconfig eth0 up, but nothing...
View 1 Replies
View Related
Nov 16, 2010
I reported recently that I have a problem connecting to a Windows network, and someone suggested upgrading to Ubuntu 10.4 I have done, and still have the problem.
The error message I get is: "Unable to mount location. Failed to retrieve share list from server".
View 3 Replies
View Related
Jul 16, 2011
I installed 11.04 ubuntu 2 days ago. I have had thousands issues trying to connect to my wireless network router dlink di524. My wireless card is a dlink dwl g122 ver c1. I can't connect to the network no matter what configuration I try.
- first time i tried to connect i had static ip settled on my router so I tried to configure Network manager from GUI. I couldn't connect; it kept trying to connect forever. so I completely removed from terminal NM (using guides on internet) e installed wicd: same problem. Tried to configure manually network/interfaces file. Didn't work. Reset router and set dhcp . Tried everything again first with NM and then wicd. Didn't solve. Reinstalled ubuntu, fearing I messed up with some configuration files and reset again router. No solution
Tried pinguy os, zorin e linux mint . Nope Borrowed a network card from a friend after reading dlink dwl g122 could have some issues with linux. Tried this realtek card : same problems as above. Finally I tried again after the fifth reinstallation of ubuntu. Both NM and wicd keep saying wrong password. Changed different password. Password is fine of course (i'm using it now with win) So I Reset router password to none. Now it says: "acquiring ip address" and keep saying that forever. So i tried the last attempt: I tried to connect from zorin5 live to the same wifi network.. Ok so I happily reinstalled everything again (zorin5). first access after installation: same problems as above
Now I'm using win7 on the same wifi network, router, and same card (cards) and everything works fine at first attempt.
View 6 Replies
View Related
Oct 5, 2010
I have just installed Ubuntu 10.04 on my HP Pavilion dv5. My laptop has a Broadcom 4312 wireless adapter. The driver for the adapter was installed by Ubuntu as a proprietary driver. The wireless light is on and I can see the available networks, but I am unable to connect to my network. The correct authorization is set(WPA/WPA2) and I have entered the passphrase correctly.
I am able to connect to the wireless network successfully from my Windows login(that is how I confirmed that the passphrase is accurate). The network shows that it is trying to connect, but the wireless authentication dialog(asking for the passphrase) keeps popping up. Incidentally, the same thing happened when I tried openSuSe and Fedora on a spare laptop. The windows systems can connect, but not the Linux systems.
View 2 Replies
View Related
