I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
View 3 RepliesI'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
I'm trying to change the boot order in grub (menu.lst) but does not working.
My menu.lst:
# Modified by YaST2. Last modification on Qua Jul 28 22:45:21 BRT 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
[Code].....
I'm running into a strange problem trying to change the service load or boot order on my CentOS 5.3 box.
The service in question is shorewall. When I go to my /etc/rc.d/rc5.d/, I notice that shorewall is listed a S27shorewall. I need it to start much later. So I run a simple command "mv S27shorewall S99shorewall"
I then restart the server. But after the reboot, something has reset it back to S27shorewall.
For those of you who like the background story: I need to change it to S99shorewall, because I need shorewall to start AFTER xend does all its stuff, as xend messes around with the underlying networking of the computer. The xend stuff was at S98 and S99...but I was able to successfully rename them back to S97 and S98, and the rename stuck. I've also renamed other service orders. Those stick. The only one that gets reset is shorewall, always back to S27. I have no clue how to tell what is causing the resetting...
I want to upgrade to 11.3 but save my desktop and settings from 11.0. How can I do that?
View 3 Replies View RelatedHow do I control load order in KDE when booting? I would like to load networkmanager 1st and some widget like "remember the milk" last in order. I have a conflict between two ("Remember the milk" is bad coded - but only remote-syncing ToDo widget that I know). When RtM loads, if network is not ready, authentication fails. Then only way to connect it is to kill widget and place it again. whatever the reason, how do I control load order of apps/widgets in KDE?
View 1 Replies View RelatedToday, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies View RelatedI recently installed Suse 11.1 from the Live CD on an older PC. Suddenly, when booting up yesterday, the system announced corrupted IPtables and didn't load KDE. After login, I tried commands like KDE, run KDE but the bash didn't understand the commands.
So I booted from the live CD, but I can't find an option in the install menu to repair the existing installation. The help in the boot-up screen claims there should be an install option, but it doesn't show it at that point, only after KDE has started from the Live CD.
Since I've already made some changes (newer firefox, downloaded thunderbird etc.), I would like to keep and repair the current installation, instead of a new installation.
I don't however understand enough about the automatic partitions I'm being offered in the installation menu to know what to choose to keep the existing files. I did choose the offered automatic partitions the first time, and have now several partitions, home swap and so on.
Second question: While 11.1 was still running nicely, I could not find the option to upgrade to 11.2 in the Yast menu (I don't know any batch commands, so I only use Yast for installation). Looking at the download sites on opensuse on the internet, I saw an update option, but when I tried to add that URL to the Yast repository, it somehow didn't work. I also didn't see a nicely packed .rpm or similar update package.
Third problem: I downloaded a newer version of Firefox and Thunderbird and after some tries got Yast software repositories to install them. But the Avira antivir tar.gz package I downloaded, did not appear on the Yast repository manager. Doubleclicking to Ark didn't work, and when I went to console and tried to run the install file in the zipped package, it wanted parameters, and I didn't know what to answer.
I installed OpenSuSe 11.2 x64 on my PC.It's not work will:After installation, the system auto login KDE GUI.but when I reboot(or shutdown and open) my computer. Message on screen meaning:"can't find bootable partition".My PC's hardwareMother Board: DFI 790FXB-M3H5(South Bridge: SB750)Hard Disk: WD 500G*2 Raid 0(via SB750 Chip function)Oh, I'm sorry, It's Fakeraid, not hardraid.
View 9 Replies View RelatedI have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
I may be in the wrong section here (hardware) but I do believe this is a hardware issue. If indeed it is not, I welcome any admins to move this post to the correct section. That said, here's the issue:After years of frustration and problems with Windows XP, my parents finally asked me to install a Linux distro onto their machine. Taking their needs and lack of experience outside Windows in mind, I suggested Ubuntu and Linux Mint to them (as I do to pretty much anyone who wants an easy and beginner-friendly distro). Running first Mint's live session and then Ubuntu's on my own machine to give them an idea of how their new desktop would look, they picked Ubuntu and I grabbed the disk, my external hard drive, and proceeded to back up all their pics, music, docs, etc onto the external.
Once finished, I popped Ubuntu (10.04 LTS) into their machine for a reboot. Realizing when the Windows XP logo came up that the boot order is set to boot from the hard drive first, I went into BIOS and changed the boot order to check the appropriate DVD drive first (they have two DVD drives, both can and have burned onto DVDs without issue), and then the hard drive. Saving my changes and exiting, I did another reboot.I got as far as the splash screen where the dots under the Ubuntu logo lit up as normal, and then after a bit of a wait on my part, suddenly exits to a screen with a prompt telling me a boot device could not be found. Trying again with Linux Mint proved similar.Next I tried simply letting it boot into Windows as normal where I could then use Wubi to install Ubuntu beside Windows but again, the screen got as far as the Windows logo with the blue "loading bar" underneath and then would simply reboot. Having to focus my attention elsewhere for a couple minutes I found out upon return that the system was stuck in an endless loop of rebooting, asking to select between a safe mode, normal boot and last known configuration for Windows, then to the logo and starting over again.I went back into the BIOS and returned the settings to booting from the hard drive first as before (nothing else had been changed), and attempted another reboot. Same loop.I had made a boot "stick" for Ubuntu some time ago, and I've used it once when installing Ubuntu on a friend's laptop which had a broken CD drive. After it wouldn't boot from the USB device I looked in BIOS and selected "look for other devices to boot from" as there was not option to boot from USB in the standard option list (just hard drive, DC/DVD, and disabled). Still no luck.
Calling up my self-proclaimed computer expert uncle, he assured me that returning the BIOS to its default settings would allow it to boot normally back into Windows, probably after performing a disk check.Taking his advice I returned the BIOS to its default settings and reboot. No change, same loop! Frustrated I called him up again, and he said he'd have a look at it when he next gets a chance. heh. That may not be for a while as he is known for taking on projects he can't (or won't) finish.Anyway, tired and now uncertain, I thought perhaps it's something to do with a live disk. I tried an openSUSE installation disk and ended up with "please insert disk 1 into drive" prompt after selecting "install" from the first menu on the disk.
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedI did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Now I cant boot any more I get the following:
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedI am working on a English (US) KDE installation of opensuse 11.2 with a US keyboard and I have some troubles to configure my system in order to work on some French documents using Kate, Kwrite or Eclipse.
For instance, when I save the content of this link [url] on my hard-drive and open the file in Kate, Kwrite or Eclipse, all accentuated characters are displayed as black lozenge signs with a ? inside. What should I fix in my configuration to have those characters show correctly?
A related but maybe slightly different situation is the following: In Eclipse, when I use a French keyboard layout in Eclipse (using the shortcut Ctrl + Alt + K after setup in Configure Desktop > Regional & Language), I can type and display accentuated characters correctly. However, as soon as I spell check my document (I believe Eclipse use aspell for that), all the words containing the accentuated characters that I typed are shown as being wrong. Eclipse suggests some corrections that show up with black lozenge signs with a ? inside...
I've got a mate that wants to put windows 7 dual boot with osx on his mac book pro. I have talked him into putting Ubuntu on as well I just don't know how and in what order. So what is the best way to do it? Any good websites/tutorials?
View 2 Replies View RelatedI love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
My system:
Intel Core2duo
Mother board Intel DG31PR
Intel integrated graphics G33
3 GB DDR2 RAM
250 GB SATA2 Hard drive
I had a triple OS xp 7 and Linux Open SUSE 11.4 the last one was the active partition.the grup boot loader used to provide a OS selection screen .any way , I cant boot my system after restoring a full disk image created by "Acronis TrueImage program" , what happens is that i get a BIOS message "there is no operating system insert disk and try again"however when i set winxp partation as active i can boot winxp againThere is some thing I'd like to ask for please ,when i install Linux : did it install grup boot loader on the master boot record or on the boot sector of the / partition ?
View 4 Replies View RelatedMy computer(win xp) crashed. When I turn it on I get the flickering line. If I press F2 while the BIOS is loading I can access the BIOS setup, but no operating system will load. I am not very familiar with BIOS. I put a cd in the cd drive that contained the latest download of Ubuntu and told it to reboot. Nothing happened. Setup says my CD-drive is set to a secondary drive. I looked in the CD files and I saw the windows installer (wubi). Is there a way I can boot linux?
View 13 Replies View RelatedI wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
View 9 Replies View RelatedFor some reason, every time I shut down and reboot my machine, the system time advances four hours. The local time here is EDT (-4hrs UTC). I have it set correctly in Yast and have the 'hardware clock is set to UTC' checked. However, for some reason, the next time I boot, the system time will be ahead four hours.
View 7 Replies View Relatedi have tried following the instructions for installing but nothing seems to work that do i need to know or ask that i am not doing to make this work. i made a dvd from the .iso but it does not want to do anything. i talked with the board manufacture about the bios needing to recognize the dvd but he said that bios does not have anything to do with it. it only sees it as an optical drive. what are the files on the dvd that the boot system needs to see for it to work? and lastly why does linux have to make things sooooo difficult.
View 9 Replies View RelatedNote: I am doing such setup for the first time so I don't know if there is a problem with given opensuse version or problem with what I am doing. System: openSUSE 11.4 RC1
Desired setup: entire system except /boot partition on hard disk, /boot partition on USB (pendrive). Aim -- making impossible to boot from hard disk, forcing boot from the USB (please, don't question my aim, I am just trivializing the issue here to shorten the description).
Setup: I set /home and / partitions on hard disk (/sda), /boot partition on USB (/sdb), I selected the options to Boot From Boot Partition as well as Boot From Master Boot Record. Finally I selected Boot Loader Options and selected Set active flag in Partition Table for Boot Partition. I installed the system.
What works:
a) without pendrive inserted I cannot start the system
b) with pendrive inserted GRUB menu shows up and system is ready to boot
The problem: after initial starting, there is long pause, and system switches to text mode with error:
Code:
drive "/dev/disk/by-id/id_of_my_pendrive" is not found Since the console worked, I logged in, and yes, actually there was not such disk found. But the disk (pendrive) was there -- the initial booting took place not from void, but from it. So why it is not present? Out of curiosity, I pulled it out, and plugged it in back, now it was visible in "dev/disk/. Question: what should I change/tweak for correct booting the system from pendrive? Or is a bug in 11.4 installer? I would like to setup everything as it should be done -- I mean within installer.
What I found so far: Booting encrypted system from USB stick - Gentoo Linux Wiki it is similar problem to mine, but only similar. I have other symptoms.
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;