OpenSUSE Install :: 11.3 System Freezes During Boot
Sep 7, 2010
I love opensuse as it's much snappier than MINT. But my system 11.3 is freezing while booting. I pressed ESC during splash and can see messages on the screen. The last message is ATA3 Exception EMASK. I have uploaded the /var/boot.msg here klogd 1.4.1, log source = ksys - Suse Freeze - CuQAd3dg - Pastebin. There are no other log files!
My system:
Intel Core2duo
Mother board Intel DG31PR
Intel integrated graphics G33
3 GB DDR2 RAM
250 GB SATA2 Hard drive
View 7 Replies
ADVERTISEMENT
Jul 6, 2010
A little while ago i bought a magazine with the openSUSE 11.1 distro on it but couldn't install it so i gave up. I am attempting to have another go. The problem is that the os will work fine when booted from CD in fail safe mode and can be installed from there but when out of fail safe mode the system begins to boot but freezes and will do nothing more.
View 9 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Nov 24, 2009
I upgraded my Dell 2.53G machine from 10.3 to 11.2 (KDE desktop). Everything seemed fine for the first day. Then the whole desktop froze. No screen update, no keyboard, and, though you could see the mouse move, clicking didn't do anything. The only way out was to pull the plug.
After multiple attempts at fixing it failed, I repartitioned the disk and tried a "clean install". Everything worked for about 2 hours. The system is currently frozen. The harddrive is quiet. The only "3rd party app" was Adobe Flash, pulled from the Non-OSS repository.
View 9 Replies
View Related
Aug 3, 2010
i have running more than 50 servers with openSUSE 11.2 for a long time without any problems. After upgrading 30 server to 11.3 some of them are freeezing after one or two days. I can ping, but i cannot log in. At the console i can type in the user and the nothing happens, system has to reboot.
All servers are Hewlett Packard Proliant G4,G5,G6 with 32bit and 64bit. No errors or hints in the systemlog.
View 9 Replies
View Related
Jul 15, 2011
The system frequently freezes the screen. The mouse is still moveable but there is no reaction on any click. Keyboard does not work either (pushing Num-Lock does not toggle the Num-Lock light on the keyboard). However, Alt-Print-b works for a reboot. The only other way out is to turn of the computer.I had this effect some time ago where I thought it was a problem due to the NVIDIA graphics driver. Since then, I changed back to the standard VESA driver and thought the problem would be gone. Just a thought
I toggled through the log files in /var/log which had the file date/time of the crash but I could not find any hint.Which log files could I look as well to dig for the problem? Or any idea for such an effect?
View 9 Replies
View Related
Jan 25, 2010
i am using DELL XPS STUDIO 1650 with configuration
Processor
Intel Core2 Duo Processor P8700 (2.53GHz/ 1066 FSB/ 3MB Cache)
Memory
3GB (2 X 2GB) Dual Channel 1066MHz DDR3 SDRAM
Hard Drive
320GB 7200RPM SATA Hard Drive
Video Card
512MB ATI Mobility Radeon HD 3670
Wireless Network Card
Intel WiFi Link 5100 (802.11a/g/n) Half Mini-card
i have installed the new 11.2 OS, every thing went well until i switched on the desktop effect, when i clicked the apply button the whole system freezed, i had to manually switch of the system and re-started. everything went well until the username and password was entered, at the time of the progress bar the system dint respond, but the curser was moving but very slow moment was observed. i tried to repair the system with the repair system option, i tried repairing the file system i got the following error after pressing the help button
"error detected
the Ext4 file system of the partion /dev/sda6 is corrupted. to repair the file system, press repair"
and the second sda7 with the error "the Ext4 file system of the partion /dev/sda6 is corrupted. to repair the file system, press repair"
i pressed the repair button but nothing happen. and i even tried to re install the OS, the same problem exists.
View 1 Replies
View Related
Feb 22, 2010
Im running opensuse 11.2 on Linux 2.6.31.5-0.1 64Bit, KDE 4.3.1 with 4GB RAM, Intel duo core processor with Intel graphics card. I initially had opensuse 11.1, which i removed and installed 11.2. Initially everything.Then came the problem, the system starts up fine but then after a few hours freezes, monitor powers off and it wont accept commands from the keyboard or mouse. Meanwhile the lights (caps lock, numeric and scroll) on the keyboard blink. The power light is still on and i can hear the hard disk turning.
I have to forcefully turn the power off and restart but can freeze again after random periods.I do lengthy and demanding computations and its common for the PC to run for weeks without turning it off.
View 7 Replies
View Related
Nov 16, 2009
I installed openSUSE earlier today, I have Windows 7 on this PC too. I installed using all the default option.Installed fine, booted up. Working perfectly. Used it for a few hoursI changed an option to enable the desktop effects (the 3d effects). When I did this the computer froze completely, I had to pull the plug.When I rebooted the computer froze on reboot.I get to the point where it displays the graphical screen, then the screen switches to the brighter green, higher resloution graphical screen. I get the white progress bar under the chameleon. It gets to half way. Then the mouse cursor becomes quite flickery and slow, and it doesn't progress any further. Again to reboot I have to pull the plug. (Although interestingly the contrast buttons (F4/F5 on my laptop still work).Steps I have taken.I have repeated the install, does exaclty the same thing.
I have downloaded the 32 bit version (I originally installed the 64 bit) and again resinstalled - does exactly the same thing)I have hit escape so I could see the not graphical boot screen, unfortunately it get past that, goes to the graphic screen/progress bar and then hangs at the same place.The LiveCD (running from the CD still works fine)I really dont know what to try. If nothing else could you tell me the quickest way to remove it, delete the grup bootloader and recover the space it took from my partitions.
View 9 Replies
View Related
Apr 22, 2011
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
View 9 Replies
View Related
Sep 1, 2011
After a hardware freeze, my system boots directly into the Ubuntu screen with 5 dots and hangs. Booting into recovery mode loads the tools menu then freezes before I select anything. The system still boots and runs windows 7 from the same hard disk just fine. I've booted a live cd and run file system check on my ext4 partition and it says it's clean. I can mount the volumes and read the data, just can't get the os to boot.Any suggestions before I backup and reformat?
View 1 Replies
View Related
Dec 21, 2010
I've got an OpenSUSE 11.0 machine that's been working fine for quite some time. Today it wasn't responding at all to HTTP or SSH requests, so I power-cycled it. Now it's freezing up during boot at "Setting up hardware clock". I can't get past it in the boot-up, whether I use the default or the failsafe boot options.
I'm able to fire it up with a 11.3 install DVD and enter the rescue mode. From there, though, I'm not sure what to do next.
I can't use YAST -- can't boot that far. Most of the threads I've found on this topic via Google recommend doing something in YAST, so I thought I'd nip that in the bud.
I did check the BIOS clock, and it was about a month slow. I reset it manually -- hopefully I haven't screwed myself completely.
Any assistance would be hugely appreciated. This box is running as a server for a few websites, and the users would like them back.
AFAIK this is OpenSUSE 11.0, 32-bit, but I could be mistaken. It might be 64-bit. Where would I check that prior to attempting to boot?
View 7 Replies
View Related
Aug 27, 2010
Im running desktop dual boot system with two hard drives, one with Windows XP and the other with Ubuntu. Ive had no problems with this until now when I upgraded from Hardy to Lucid. Now I have problems with the system freezing on boot up.
Sometimes it will boot just fine, and at other times it will freeze before the login screen appears. When it does freeze, there are flashing lights on the keyboard and the floppy disk light (yes, its an old computer) is lit constantly. The only thing I can do is switch the computer off and hope it will boot up properly the next time.
When I did the upgrade there were a couple of files where the program asked if I wanted to keep the custom file or overwrite it with the maintainers file and I chose to keep the custom one. I THINK one of them might have been GRUB, but Im not sure.
Has anyone had a similar experience and were you able to cure it? I have seen a thread where people have had the system freeze on them, but Im not sure its QUITE the same thing.
Ive also done a clean install with Lucid on my laptop and have had no problems. The laptop is only running Ubuntu.
Im also wondering if reinstalling Grub on my desktop would solve the problem.
a. If so, would it still show both operating systems?
b. How do you do it?
View 2 Replies
View Related
Jul 4, 2011
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
View 3 Replies
View Related
Sep 5, 2010
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
Jan 31, 2010
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Now I cant boot any more I get the following:
View 9 Replies
View Related
Oct 22, 2010
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies
View Related
Jul 17, 2011
Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.
View 6 Replies
View Related
Apr 28, 2011
I had a triple OS xp 7 and Linux Open SUSE 11.4 the last one was the active partition.the grup boot loader used to provide a OS selection screen .any way , I cant boot my system after restoring a full disk image created by "Acronis TrueImage program" , what happens is that i get a BIOS message "there is no operating system insert disk and try again"however when i set winxp partation as active i can boot winxp againThere is some thing I'd like to ask for please ,when i install Linux : did it install grup boot loader on the master boot record or on the boot sector of the / partition ?
View 4 Replies
View Related
Jul 9, 2010
I wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
View 9 Replies
View Related
Aug 15, 2010
For some reason, every time I shut down and reboot my machine, the system time advances four hours. The local time here is EDT (-4hrs UTC). I have it set correctly in Yast and have the 'hardware clock is set to UTC' checked. However, for some reason, the next time I boot, the system time will be ahead four hours.
View 7 Replies
View Related
Sep 21, 2010
i have tried following the instructions for installing but nothing seems to work that do i need to know or ask that i am not doing to make this work. i made a dvd from the .iso but it does not want to do anything. i talked with the board manufacture about the bios needing to recognize the dvd but he said that bios does not have anything to do with it. it only sees it as an optical drive. what are the files on the dvd that the boot system needs to see for it to work? and lastly why does linux have to make things sooooo difficult.
View 9 Replies
View Related
Feb 12, 2011
Note: I am doing such setup for the first time so I don't know if there is a problem with given opensuse version or problem with what I am doing. System: openSUSE 11.4 RC1
Desired setup: entire system except /boot partition on hard disk, /boot partition on USB (pendrive). Aim -- making impossible to boot from hard disk, forcing boot from the USB (please, don't question my aim, I am just trivializing the issue here to shorten the description).
Setup: I set /home and / partitions on hard disk (/sda), /boot partition on USB (/sdb), I selected the options to Boot From Boot Partition as well as Boot From Master Boot Record. Finally I selected Boot Loader Options and selected Set active flag in Partition Table for Boot Partition. I installed the system.
What works:
a) without pendrive inserted I cannot start the system
b) with pendrive inserted GRUB menu shows up and system is ready to boot
The problem: after initial starting, there is long pause, and system switches to text mode with error:
Code:
drive "/dev/disk/by-id/id_of_my_pendrive" is not found Since the console worked, I logged in, and yes, actually there was not such disk found. But the disk (pendrive) was there -- the initial booting took place not from void, but from it. So why it is not present? Out of curiosity, I pulled it out, and plugged it in back, now it was visible in "dev/disk/. Question: what should I change/tweak for correct booting the system from pendrive? Or is a bug in 11.4 installer? I would like to setup everything as it should be done -- I mean within installer.
What I found so far: Booting encrypted system from USB stick - Gentoo Linux Wiki it is similar problem to mine, but only similar. I have other symptoms.
View 3 Replies
View Related
Mar 20, 2011
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
View 9 Replies
View Related
Aug 16, 2011
I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
View 3 Replies
View Related
Mar 29, 2011
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
View 1 Replies
View Related
Jan 2, 2010
I have OpenSuSe 11.2 64-bit installed on my HP Compaq 6730s laptop. When I'm trying to switch user black screen appears and my system does not react on any key combinations (ctrl+alt+del; ctrl+alt+F7 ...). This was not reproduced before ATI driver installation.
# uname -a
Linux xela 2.6.31.5-0.1-desktop #1 SMP PREEMPT 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64 GNU/Linux
View 9 Replies
View Related
Jan 22, 2010
Cisco vpn client would freeze the system. The only way to recover is to do a hard reset. The funny thing is I had it working before, so it may be random. However, it just happened 3 times in a row and I haven't tried again. I'll try again tonight. I'm pretty sure I'm running the latest client for 64bit linux systems. I'll confirm that when I get a chance, as well as my kernel.
View 7 Replies
View Related
