OpenSUSE Install :: When Booting - System Announced Corrupted IPtables And Didn't Load KDE
Dec 8, 2009
I recently installed Suse 11.1 from the Live CD on an older PC. Suddenly, when booting up yesterday, the system announced corrupted IPtables and didn't load KDE. After login, I tried commands like KDE, run KDE but the bash didn't understand the commands.
So I booted from the live CD, but I can't find an option in the install menu to repair the existing installation. The help in the boot-up screen claims there should be an install option, but it doesn't show it at that point, only after KDE has started from the Live CD.
Since I've already made some changes (newer firefox, downloaded thunderbird etc.), I would like to keep and repair the current installation, instead of a new installation.
I don't however understand enough about the automatic partitions I'm being offered in the installation menu to know what to choose to keep the existing files. I did choose the offered automatic partitions the first time, and have now several partitions, home swap and so on.
Second question: While 11.1 was still running nicely, I could not find the option to upgrade to 11.2 in the Yast menu (I don't know any batch commands, so I only use Yast for installation). Looking at the download sites on opensuse on the internet, I saw an update option, but when I tried to add that URL to the Yast repository, it somehow didn't work. I also didn't see a nicely packed .rpm or similar update package.
Third problem: I downloaded a newer version of Firefox and Thunderbird and after some tries got Yast software repositories to install them. But the Avira antivir tar.gz package I downloaded, did not appear on the Yast repository manager. Doubleclicking to Ark didn't work, and when I went to console and tried to run the install file in the zipped package, it wanted parameters, and I didn't know what to answer.
View 6 Replies
ADVERTISEMENT
May 14, 2009
reducing the size of LVM. I did it by using the commands, lvreduce,fsck,resize2fs.After reducing the lvm size, my system is not booting...it is saying file system corrupted error.
View 1 Replies
View Related
Nov 21, 2010
Recently I installed openSuSE 11.3 x64 on PC with Intel motherboard, 4GB RAM & two of 1TB WD RE3.Of course I set RAID1 during installation After some struggle with GRUB which pointed to wrong devices after installation I started to work. But suddenly I found that file system is corrupted after every reboot (It does not depend on what I use and what the way I use - reboot, shutdown -r now or even just poweroff - everything follow to:
Starting MD Raid mdadm: /dev/md2 has been started with two drives
mdadm /dev/md3 has been started with 2 drives
mdadm /dev/md4 has been started with 2 drives
mdadm /dev/md5 has been started with 2 drives
[Code]...
View 7 Replies
View Related
Aug 3, 2010
My friend has a HP Pavilion dv2699ea (dv2500 series - somehow *shrugs*) that has stopped working. It's a Core2Duo laptop with a Nvidia GPU. The unit is no longer under warranty. Problems first started a few days ago with the laptop showing corrupted graphics in Windows and BSOD'ing after a few minutes of use. I tried booting to an Ubuntu LiveCD which worked for a while before succuming and crashing as well. The freezing/graphics corruption/BSODing does seem somewhat heat related (CPU runs at ~95'c under load) however I believe that if it is heat related, then it's already damaged components inside.
Now the system has corrupted graphics on bootup[1], including booting Ubuntu[2], and neither operating systems will boot at all (Windows can sometimes get logged in before showing a black screen and becoming unresponsive. Ubuntu just looks like [3] after X starts). (See comment below for links.)
The fact the problem occurs both under Linux and Windows says to me this is not a driver issue. I have run Memtest which passed fine and none of this seems HDD related as I managed to get ~30GB of data off the system before it finally gave up the ghost.
She has been using it repeatedly without giving it adequate ventilation for years (i.e. on the bed, or on a pillow), so it's my opinion that the system board has probably warped over years of cooling/heating and that's causing this current problem. If that is the case, then I can buy a replacement system board and fit it myself, saving about £200 over the cost of an out-of-warranty HP repair. Of course, I don't want to make her spend £100 on a replacement part for it to be the wrong thing, hence asking for a second opinion here!
Hopefully I've covered all the bases here. I'm a former IT support guy myself, so I've tried all the dumb stuff (driver updates, examining memory dumps from BSODs [one 'unrecoverable hardware error', three relating to the graphics card], etc).
View 4 Replies
View Related
Apr 26, 2010
Here's exracted from ubuntu Grub2 document https://help.ubuntu.com/community/Grub2:
GRUB_HIDDEN_TIMEOUT=0 This setting determines how long a screen without the GRUB 2 menu will be displayed. While the screen is blank, the user can press any key to display the menu.The default behavior is to hide the menu if only one operating system is present. If a user with only Ubuntu wishes to display the menu, place a # symbol at the start of this line to disable the hidden menu feature.According to above information, I have tried to set below in order the show the menu:
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=false
GRUB_TIMEOUT="20"
[Code]...
View 3 Replies
View Related
Dec 2, 2009
Yesterday I did follow exactly the description how to build a live system on a USB Stick with the additional second partition for the data of Live_USB_stick. So far I had success, as my Netbook did start booting and loaded the OpenSUSE 11.2. Then I rebooted the Netbook and it never again comes up with the 11.2. It looks as if it would stop somewhere at starting the graphical system, but I'm not sure.
Today, second try, I created the USB stick with the 11.2 Live System only (no second partition). My Netbook starts booting and shows the 11.2 system successfully, also further boots are the same successful. Then having created the Live system with the second partition again, results in a un-bootable Netbook again (not even the first time it comes up).
What I wonder when I did check the USB partitions: the one (sdg1) with the Live-CD can be mounted and the content is readable. The second one (sdg2) cannot be mounted; shouldn't it be mountable and shouldn't it be formated with a file system? Did anyone have some experience on this? Or, at least, the people having a running persistent live system, what does the partition them show up?
View 5 Replies
View Related
Sep 20, 2010
I currently have Ubuntu 10.04 LTS installed on my PC. The details of how it got installed I cannot explain... I installed it on a HD that was not partitioned and I accepted all the defaults that Ubuntu suggested. So as far as I know right now Ubuntu "owns" the whole HD.
I now would like to create a dual-boot system by installing openSUSE 11.3 alongside Ubuntu 10.04 LTS. By reading things here and there, my guess is that I need to create a partition for openSUSE by shrinking the one for Ubuntu. But I am really not sure.
So I downloaded the CD version (GNOME) only of openSUSE, launched the installer and the process came to the following suggestions which is basically all Greek to me:
* Delete partition /dev/sda1
* Create root volume /dev/sda1 with ext4
* Create volume /dev/sda3 for /home with ext4
* Use /dev/sda5 as swap
As I said before, what I would like to do is install openSUSE side-by- side with Ubuntu and create a dual-boot system. I do not want to delete Ubuntu! I got scared by that "Delete partition /dev/sda1" thing mentioned above and so I aborted the installation.
What is the installer suggesting? Has it realized that I already have Ubuntu installed and that I want to create a dual-boot system?
View 9 Replies
View Related
Mar 20, 2011
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
View 9 Replies
View Related
Aug 16, 2011
I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
View 3 Replies
View Related
Aug 7, 2010
I got three times fsck failure during system booting, fixed issue by reinstall whole suse last two times, this time I really do not want reinstall.
View 4 Replies
View Related
May 12, 2011
my system stopped booting after recent update.When I select desktop it goes to splash screen an dies.Have to hit reset key.If I select nomodeset it boots fine excepts graphic resolution is 1280x1024 instead of 1680x1050.System is sandy bridge, Asus P8H67-M EVO, Intel Graphics enabled no other grapics cards, Suse 11.4 64 bit.I do my updates with zypper up.
View 9 Replies
View Related
Apr 15, 2010
Im probally just being a noob here but for the projects sake I thought it would be good to identify this problem. I have an old advent laptop and I tried to install Opensuse from DVD on it. I followed the installation as normal but when I tried to boot it said some sort of check was forced and then I have to enter the admin/root password upon doing this I got the message system repair # in red. I have tried to repair the system through the installation DVD and tried re-installing it but I still get the same message.
View 9 Replies
View Related
Jan 7, 2011
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies
View Related
Feb 20, 2010
How do I control load order in KDE when booting? I would like to load networkmanager 1st and some widget like "remember the milk" last in order. I have a conflict between two ("Remember the milk" is bad coded - but only remote-syncing ToDo widget that I know). When RtM loads, if network is not ready, authentication fails. Then only way to connect it is to kill widget and place it again. whatever the reason, how do I control load order of apps/widgets in KDE?
View 1 Replies
View Related
Jun 27, 2010
I just installed 11.3 RC1, but I can only run in failsafe mode. Installation went fine and I'm not having any problems except that when my computer gets ready to launch my login screen it just display garbled graphics. I have tried multiple resolutions and the x11failsafe option, all with a no-go. I did see this error message pop up at the time of garbled graphics on one login: [GPU LOCKUP, switching to software fbcom]
View 1 Replies
View Related
Jul 29, 2010
I know I said I wouldn't do anything that could possibly do anything bad to the drive until I receive my external hard drive. I just didn't expect that upgrading from 11.2 to 11.3 via zypper dup has the potential to do that.
First, the problem: The most important partition of my computer containing all the irreplaceable stuff (images) which I had apparently only partially backed up was corrupted after I upgraded from 11.2 to 11.3.
On my computer, there are 2 drives. sda was the one that had Windows. sdb had an NTFS partition and a few smaller partitions which I used for openSUSE. After doing quite a bit of searching on upgrades corrupting partitions, I didn't find anything about it doing what I feared which was corrupting the NTFS so I went ahead and upgraded.
The upgrade went along smoothly. No problems that I could tell. The only weird thing was that the window borders disappeared near the end but I assumed that was supposed to happen. And then I restarted. First thing I noticed was that the background was blue instead of the image I had set (which happened to be on the NTFS partition). I didn't think much of it at the time figuring it was just a quirk in the upgrade process. I went ahead and decided to reset the background to what it was. And then I realized that the NTFS partition was missing -- it wasn't mounted or visible at all. That was when I started to panic a bit.
I opened up Yast partitioner and everything looked fine except that NTFS partition in question had a little * by it. I went ahead and reset its mount point only to receive an error saying that the filesystem in question doesn't exist. And sda became sdb and sdb became sda if that changes anything.
I went into Windows expecting for it to do a CHKDISK on bootup for the drive (D: ) but none of that happened. Hoping that everything was fine, I went in and tried to access it only be given an error along the lines of "The drive in D: is not formatted. Do you want to format it?" Of course, I said no but that was when I realized that this was no partition table problem like last time.
I tried restarting but Windows froze and refused to do so for several minutes so forced the computer to shutdown and loaded my copy of GParted LiveCD. It showed a 30GB unrecognized partition, another 30MB one and some unallocated space. TestDisk fixed that. (so it turns out, there was a partition table issue) What was left was what looked OK except the one partition on sda (the original sdb) that I could not afford to lose had an error.
I can't remember the exact error but it said something like "Are you trying to use a disk as a partition? Are you trying to use /dev/sda as /dev/sda1 or vice versa?" That was either in the error message or in the message I got when I tried to check the disk.
Still trying to get Windows to check the disk, I tried booting from the new sda into Windows. What I got was the Dell Utility program. It said no mouse detected and I couldn't do anything so I shut it down.
I tried going back into Windows the normal way and got the Dell Utility. I figured that this was an MBR problem after I went back into openSUSE with the new sdb still reading perfectly. Although I couldn't manage to restore the MBR so I can't log into Windows. But the other issue is far more important.
View 9 Replies
View Related
Mar 8, 2010
I install 11.2 on AMD dual core 4200+ and 2G ramafter I enabled some effects on configure Desktop effects and when I pressed apply key the computer hang and when I restart it, it hang before login screen
View 7 Replies
View Related
Jun 2, 2010
I was unable to boot into my system after I'd just shut it down, so I tried repairing it using my installation media... only to find that though my root Ext4 fs on sda6 was corrupted & *supposedly* repairable, the cd could not do so for some reason! All I can get is a command line, saying something about the root fs being mounted as read only, and I have no idea how to resolve this. I cannot afford to loose ANY of the data I have on here.
View 2 Replies
View Related
May 31, 2011
I've never liked unity much so I've been using classic. However, out of curiosity I decided to give it a try. However, when I tried to load it, my login sound played, but the dock and the taskbar didn't load. I've been using compiz in classic, so would that have anything to do with it?
View 9 Replies
View Related
Jul 14, 2010
yesterday I try to update my system to 11.2 After that my GNOME didnt start in automatic mode ( I`m not able to start GNOME by hanD) What I have to do?
View 9 Replies
View Related
May 8, 2010
I was updating all the installed packages on my system yesterday via YAST. The package manager seemed to hang when downloading a small update for YAST itself (related to ncurses, I think) so I hit the abort button. The package manager quit but now it doesn't work. Trying to start the software management module (Qt version) give me the following error:
UI Syntax Error
Couldn't load plug-in qt-pkg
Check the log file!
So I then tried the console version of YAST. The software management module doesn't work here either. It give me the following error:
UI Syntax Error
Couldn't load plug-in ncurses_pkg
Check the log file!
I Googled a bit and came to the conclusion that for the second error I should try the following command:
zypper install yast2-ncurses-pkg
But this just gives me another error:
zypper: error while loading shared libraries: libzypp.so.619: cannot open shared object file: No such file or directory
So now it appears that both YAST and zypper are corrupt!
View 9 Replies
View Related
May 9, 2010
Using 11.2 64 bit on Amd 3200 64I installed 4 Days ago After running a online update yesterday with Yast which was completely finished, starting the machine today, I wanted to add a program Yast reports "UI Syntacs Error Couldn't load plugin qt_pkg" Using 11.0 on P2800 I run an online update 3 days ago. Today I started, the updater reported updates. When I accepted I got the error message "DBus error :Unable to get transaction id from packagekit." Disabling the updater, starting Yast, I got "error initializing the repositorys.Parse error." and "UI Syntacs Error Couldn't load plugin qt_pkg" On both machines I gave the command rpm --rebuilddb On the 11.2 Yast started without error.
I wanted to instal a program when the download was completed I got again the message "UI Syntacs Error Couldn't load plugin qt_pkg"On the 11.0 Yast installed a small Program without error.When I opened Yast online update, I got the "parse error again. When I say o.k. there, Updates are shown and installed. However using the updater kit it reports still "DBus error : Unable to get transaction id from packagekit". How can I fix the DBUS error of the 11.0 (On an 9.0 I had to deinstall Rug and thereafter run only Yast) I can deal with the Parser error myself, checking all Repositories should do it)
View 6 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Mar 7, 2010
I've two laptops, my main one is Dell inspiron 1545 and for experimental purposes, I use Acer Aspire 5315. I used to be a Redhat linux user from 2001 to 2003 on and off, but lost touch with linux for the past few years. I grew frustrated with windows after my Vista recovery partition in Acer Aspire got corrupted and when I took the laptop for servicing, the service person installed a pirated copy of XP. The laptop constantly overheated and I always received all kinds of warnings from microsoft about using pirated version. I finally decided to buy a new laptop and hence bought Dell inspiron 1545. Too bad I didn't realize I could have switched to linux.
I was suspicious about Windows 7 in my new dell right from the day one and thought of checking linux options available. I was surprised to know the the most popular linux distro now was no longer Redhat or Suse but a relatively newcomer Ubuntu. I installed Ubuntu 9.10 on a 40GB extended partition and was extremely satisfied with the ease of installation. The hardware detector told me I need to install "Broadcom STA" for my wireless card to work. I installed ATI driver from AMD website and it worked like a charm. Like any linux user, I couldn't resist the temptation to distro hop, so decided to use my old Acer laptop as testbed. The first distro I tried was KDE version of Fedora 12. The splash screen was very impressive and more graphical than Ubuntu's, however the boot time was painfully slow and I ran into a dependency hell while trying to upgrade using Kpackagekit.
I tried Linux mint KDE next and it was impressive, but I was still not completely satisfied. I then tried Opensuse 11.2 KDE and I immediately fell in love with the beautiful look and feel. I was so impressed that I went ahead and replaced the ubuntu in my dell with Opensuse 11.2. However, it was not smoothsailing when it came to hardware detection. After a lot of trials and tribulations, I managed to download Broadcom STA drivers and managed to get my wifi working. I realized that Radeon HD was installed as default and tried to turn on compositing. KDE got stuck and even after cold reboot, didn't recover. I had to re-install the OS and this time I tried to install ATI proprietary driver. But running the driver install script threw up lot of errors and I lost my mouse cursor. I had to re-install the OS again, generate RPM for the ATI driver and install it along with Kernel source, headers, gcc, make, etc... Finally I was able to activate compositing.
I then installed Xen and when I booted to Xen kernel, my mouse cursor again dissapeared, most likely due to non-compatibility of ATI driver. I had to uninstall Xen. I then tried to upgrade the kernel to 2.6.31-15 and again my mouse cursor dissapeared. I had to re-install the entire OS again. I'm so frightened of Kernel updates now. I never had such problems with Ubuntu kernel updates, maybe ATI is more pro-active in releasing new versions of drivers when it comes to Ubuntu.
In-spite of all my hardships, I'm so much in love with Opensuse and KDE. I love it so much that it now runs on both my Dell and Acer. I've removed all the other distros from my Acer. It has been quite a long time since I tried any other distro and I don't even have the faintest desire to distro-hop. Infact, for the past few days I'm so worried about the news of Novell takeover. I really don't want Opensuse to die. It will be a big loss for Linux users.
View 4 Replies
View Related
Dec 22, 2009
I have a Logitech Quickcam Pro 4000 webcam which is supposed to work OK with Linux. I use Open SUSE 11.0 and under gqcam I have multiple images. And in black & white. See here: (if the image doesn't show it can be found there: WebcamOpenSuSe on Flickr - Photo Sharing! So, I wonder: is this a problem of gqcam or a driver problem? The only thing that maybe I didn't do right is to install the Gspca/Spca5xx driver found here: HCL/Web Cameras - openSUSE because my camera isn't on the list of UVC compliant webcams.My camera is seen as: Bus 005 Device 002: ID 046d:08b2 Logitech, Inc. QuickCam Pro 4000
View 1 Replies
View Related
Jan 27, 2010
I created a file which in I tried both :
Code:
MAILTO=""
* * * * * /var/www/scripts/script.php >> /dev/null
[code]....
View 5 Replies
View Related
Sep 17, 2010
My /etc/hostname is not announced on the local network (not showing up on my Mac nor router) when setting /etc/network/interfaces to:
Code:
iface eth0 inet static
address10.0.0.10
netmask255.255.255.0
gateway10.0.0.1
I have tried bringing the interface up and down, and have also rebooted. If I change it to DHCP it will display, but this does not really help me.
View 9 Replies
View Related
Mar 23, 2015
I have installed a basic Debian system. I have a bootable Windows 7 ISO I'd like to install, but don't know how to do a USB install in Debian. I tried double clicking the USB logo in Debian and got an error message "Unable to mount Location. Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and mkake it setuid root.
View 6 Replies
View Related
Oct 16, 2010
I want to upgrade to 11.3 but save my desktop and settings from 11.0. How can I do that?
View 3 Replies
View Related
