I've got a mate that wants to put windows 7 dual boot with osx on his mac book pro. I have talked him into putting Ubuntu on as well I just don't know how and in what order. So what is the best way to do it? Any good websites/tutorials?
View 2 Replies
I am using Mac Pro with MacOS + Vista 32bit +Ubuntu installed. Using rEFIT with lilo bootloader. I want remove Vista 32bit and install 64bit Windows 7 instead. I am afraid of trying to install Win7, because it may delete bootloader. How can I remove Vista and do a clean install of Win7 to my Mac Pro without losing ubuntu and MacOs?
View 1 Replies View RelatedHere is my dilemma at first grub loads and I have this options:
1.ubuntu 9.04 with a new kernal (update via-- system update)
2.ubuntu 9.04 with old kernal
3.recovery
4.......
5.windows.
And inside windows there is another boot screen for
1.win-7
2.vista
Now I want to remove win-7 and install 10.04 in its place I want the safe/proper procedure to do it if there is already a thread like this then direct me there as I searched and did not get it.
I've decided to triple boot on my system, but I want to make sure it's feasible. Here's my set-up: I've got two 500GB hard drives, and a good amount of power to handle the OS's. I want to set-up Ubuntu as my main OS on a single hard drive. Then, I want to put XP and 7 on the second hard drive, side-by-side. Obviously, I would then want a bootloader to display an option at system start to pick either one.
The reason I want all these is for gaming mainly, and Netflix. I've got old games that only work on XP, and some newer games are coming out that I'm sure will run better on Windows 7 (Starcraft 2 is going to be amazing!). I found this documentation: [URL]. It's obviously for dual booting Windows and Ubuntu. My question is, can I triple boot Ubuntu, Windows XP and Windows 7? If so (and I'm positive I can) are there any good resources for the process?
So I just bought a 500GB HDD, now I want to use these three OS on my PC. I know how to dual-boot XP with 7, but i'm new to linux. BTW, would i need 3 partitions for these 3 Operating systems (1 for each) or can i install Ubuntu in one of those two windows partitions? (eg. C: XP&ubuntu, D: 7). What would be the easiest & fastest to do? And how to do it?
View 4 Replies View RelatedI install Win7 firstthen I install Ubuntu in a separate partition it run ok with grublast i install fedora in a separate partition it run with 2 choice win7 and fedoraI use hiren boot cd to boot with mini linux and run grub 2.0 application on it.i set up and run i only use Win7 and booot linux error.
View 2 Replies View RelatedI am a linux newbie, I have messed with it some (backtrack) but I don't know a whole lot. I am going to networking security and I am in a linux class now. We are using fedora. On my laptop, I want to triple boot. Right now I have just 1 partition, with windows 7 ultimate x64 installed. I want to triple boot windows 7, windows xp x64, and fedora 12 x64. I am getting ready to format my laptop now with xp installing first. Then I will do windows 7, and then lastly fedora. Do I need to do anything special while installing fedora last? I have a 300gb hard drive, and I plan on having 100 for xp, 150 for 7, and the remainder for fedora.
View 2 Replies View RelatedI need to find the best way to triple boot XP Win7 and Debian, with Debian installed first on my laptop. VMWare, Wine and Cedega cant do what I need with how I run my laptop, which is equivalent to my portable laptop/workstation. Is there a partitioning tool in Debian that I can install to make a small partition for each? I also hace to set up GRUB instead of the Windows BL.
View 1 Replies View RelatedI had a dual boot working fine with XP and F12 on two physical drives, all was well. Last night my friend helped upgrade my system, I now have 3 drives (20gig F12) (60gig XP) and (320gig Win7) now the PC only loads Win7 as I think my friend told bios to boot from 320gig. Has anybody here got experience with triple boot from 3 drives? Here is my guess, tell bios to boot from other drive and add Win7 to grub. Not sure how but that's my guess. Also what worries me is that win7 does not "see" the other two drives.
View 5 Replies View RelatedI wondered whether it is possible to add a PC-BSD system to my existing OS X 10.6.6 + UBUNTU (using rEFIt)
How to resize the partition with linux and installing PC-BSD 8.1 on my Mac?
First I installed OS X and updated it to 10.6.6
Then I created a BOOTCAMP-Partition using the bootcamp-utility
Then I installed rEFIt
Then I installed UBUNTU (and the dual-boot works very well)
Now I want to add a PC-BSD
May I change the partition-size of the UBUNTU-partition without destroying MBR oder rEFIt? If yes, will rEFIt recognize the newly installed PC-BSD?
Its sort of OSX+Multi-Linux. There is a wonderful page at [url] but unfortunately the section is not updated yet.
I've been tinkering for over a week to try and get a functioning triple boot + shared data working. i've hit a road block. i'm using reFIt with SnowLeopard/W7/10.10. i can't get into ubuntu
*** Report for internal hard disk ***
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 390772495 Mac OS X HFS+
3 391034640 781659639 Basic Data
[Code].....
OSX and Windows are fine. but whenever i select linux, it boots directly into windows. i'm hoping i don't need to install GRUB2 to the windows partition as that would defeat the purpose of reFIt (would it not?)
I've been running Ubuntu for some time on an old MacBook 3,1. It has been a happy OSX / 10.04 dual boot. I'm attempting a triple boot: OSX / Ubuntu 10.04 / Ubuntu 10.10. The partition scheme is similar to this, I've lost exact partition sizes:
Code:
1 20.5kB 210MB 210MB fat32 EFI System Partition boot
2 210MB 32.9GB 32.7GB hfs+ Untitled
3 33.1GB 33.2GB 105MB ext2 Untitled
4 33.2GB 33.9GB 734MB linux-swap(v1) Untitled
[Code]...
I have installed reFIT-based triple boot. Here is the partition scheme:1. GPT Protective Partition (GPT and MFT). Mac OS X (GPT and MFT)3. Windows 7 64-bit C: (GPT and MFT)4. Windows 7 64-bit D: (GPT and MFT)5. Ubuntu 10.04 / (only GPT)6. Ubuntu 10.04 swap (only GPT)Windows only supports MFT and thus sees last two partitions (5 and 6) as unallocated space. Can I somehow make it see these partitions to be able to access files from Ubuntu?P.S. I know this is rather Windows problem, but I don't know any good forums where I can ask that, because mostly on these forums the answer is "Why would you need anything but Windows?".
View 8 Replies View RelatedI recently upgraded to Ubuntu 10.04 from earlier versions. I have a dual boot system with Windows 7. Grub was set to boot Windows by default Things were working fine. I decided to upgrade to Grub2. It seemed like a good idea at the time. Now when booting up,the name at the top of the Grub menu is 1.98, which is Grub 2. When I run grub-install -v, it comes back grub-install (GNU GRUB 0.97) which is not Grub2. Now when I boot up, Ubuntu 10.04 is the default. I have to manually choose Windows if I want to use that system. I have been unable to change the boot order following instructions from this site. Any Way changing the boot order to make Windows 7 the default. I am using a Toshiba Satellite.
View 5 Replies View RelatedI am currently running Windows 7. I want to install the latest ubuntu (which I know I can just install right on top of &) but I also want to install FreeBSD and either Windows Server 2003 (maybe 2008 if i can get my hands on it). What would be the best way to go about installing these 3 OSes next to W7? I was also thinking about just upgrading my hard drive to a 2TB internal anyways, so waiting to get that is also an option, then installing everything in the "best" order. I also want to try installing Mac sometime too once I upgrade hardware.
View 2 Replies View RelatedWith my ubuntu iso in the dvd drive, I do not get any boot from options for it to be used as boot drive within the boot order from the boot control panel. On startup with the alt key pressed I only get the Mac drive but when I change the boot to the other option (network) and press the alt key on startup, I get the boot order screen with the Mac HD and also the Ubuntu iso but cannot get the Ubuntu to highlight and use, just the Mac remains highlighted. On the same screen I get a very small wrist watch to the left of the screen that the mouse can move up and down but not to the side.
I am using a windows usb keyboard and usb mouse, I have used all manner of keyboard combinations to get the Ubuntu disc to highlight but nothing seems to work. Within the drive section, the "My Mac" drive is locked and cannot partition it or change anything about it. Has anyone any ideas that I can try? I did not want to get a Mac keyboard and Mouse as yet seeing as I wish to change the operating system to ubuntu.
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
I Currently have Windows 7 and Ubuntu 10.10 on dual boot system, but I want to change that. I want Win 7, openSuse 11.3 and Ubuntu 10.10 on a triple Boot. I have a 500gb sata hdd. The Rough Plan was to 150gb for Win7, 150 for openSuse 11.3 (50gb for / and 100gb for /home) and same again for Ubuntu 10.10 and 50gb for Swap. I am using entire drive for 3 Operating Systems and Swap. I have read a few guides and they all say install win7 then opensuse then ubuntu, and thats fine but none say anything about partitioning. And one main problem is cant split into more than 4 different partitions.
View 3 Replies View RelatedI have an Intel iMac that has about 500 GB of unused space and I was wanting to install Ubuntu or Ubuntu studio or any Linux distro on about an extra 50 - 100 GB of space. I currently have the iMac with a windows bootcamp partition on it as well. Is it too late to partition the main partition and install Ubuntu on it without having to erase it and reinstall the Mac OS and Windows on it? Also, I wanted to try Ubuntu studio on a live CD, but when I hold C and bring up the preboot environment then I don't see an option to "try Ubuntu without changing anything".
View 2 Replies View RelatedI have been searching in preparation to install 10.04.1 with 2 installations of Windows,already installed.(Win 7 then Vista) I have left room at the end of the drive for Ubuntu. When I get to the stage to select the boot options and click on advanced, what should I select?
View 4 Replies View RelatedI would like to triple boot my Macbook Pro. I don't want to use rEFIt. Although it worked on my iMac, it would randomly not load the OS's sometimes.
1. Is there a way to use Boot Camp?
2. I know how to use Mac with the windows xp bootloader. How can i put Ubuntu in too? I got this thing about taking 512 megabytes of the bootloader grub or something like that but I don't get it.
i'm trying to make my imac capable of triple boot.the software i use are:
mac os x 10.5.8
win vista sp1
linux opensuse 11.2
[code]....
I would like to install Opensuse 11.4 on my macbook pro to do a triple boot. I found lots of tutorial on Ubuntu but not on Opensuse, and this facility is the same way?
View 3 Replies View RelatedI'm trying to Triple Boot my MacBook pro(Mac OS, Win 7, and opesSUSE).I installed Mac, Win, and openSUSE last.I have a few questions here:
1. Do I use GRUB or LILO?
2. Do I select "Root Partition in sda3"?
3. After installing the openSUSE, the rEFIt Menu become weird:
I enter Win selectioon, and then there's Grub selection again.
4. I enter Linux selection, and there's also Windows selection at the Grub.
5. Is my swap files working?
Few days back i was searching for triple booting my mac through this ubuntu forum.and i ran into command name bless
it was like : bless /dev/disk0s3 --setboot -- device --verbose
i ran it on the terminal after booting it from a Leopard installation DVD in a hope to run linux on my macbook(macbook white..intel m/c 160gb HD..2 GB RAM) after trying all the stuff and eventually everything has stopped booting neither leopard nor windows. i can see the grub for ubuntu loading up but after selecting the option for ubuntu, ubuntu is also not working.
i was using refit as well.i cannot even boot from my leopard installation dvd..windows that was priorly installed using bootcamp is corrupted too.
'rolling' release as redoing install /upgrade every 6 months is getting 'old' My machine is triple boot
Hard drive is 320 GB
Windows 7 - 167 GB
Ubuntu - Maverick - 73 GB
Ubuntu - Natty - testing version - 65 GB
I do not want to screw up my 'grub' as it's been trashed a couple of times recently and had to re-install everything, which went great with install setting up partitions. I am not sure where 'grub' is installed to. I did install Windows 7 first then let installer split hard drive in half to put Ubuntu on then while installing my second Ubuntu, I let installer split the Ubuntu partition in half, hence the 167 GB Windows and the 2 smaller partitions for Ubuntu.I was thinking to maybe let Debian install over my Maverick install. Would that work and not mess up my Grub and cause me to not be able to boot and have to fix the drama?
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies View RelatedI'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
i installed ubuntu after windows 7 but now i cant boot windows 7 i tried the start up repair and I've read through some questions answered on here and int figure out the problem i don't want to uninstall ubuntu unless it's my only option
View 9 Replies View Relatedi have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
