OpenSUSE Install :: Dual Boot On A Mac - Can't Load The System
Mar 20, 2011
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
View 9 Replies
ADVERTISEMENT
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Aug 16, 2011
I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
View 3 Replies
View Related
Jul 9, 2010
I wish to add more OS to my dual boot system with suse (sda) and windows7 (sda). The plan is to add Linux Mint(sda), PC BSD (sda), Fedora (sdb) and Solaris (sdb). I wish to remove grub2 from mint and install grub legacy, not sure whether it will work or not. I will be reinstalling grub from suse dvd. It gives me a free hand for adding boot entries. I wish to know whether I can remove grub2 and install grub legacy. In grub2 all boot related folders are stored in more than 1 place like /boot and /etc and subfolders.
View 9 Replies
View Related
Sep 5, 2010
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies
View Related
Apr 27, 2011
I did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
View 9 Replies
View Related
May 2, 2010
I have upgraded to ubuntu 10.04 but now can't boot into win vista, ubuntu and vista are on grub but vista will not load, I have tried sudo upgrade-grub which seemed to work but had no effect on loading windows. I did think of using win dvd to fixmbr but only as last resort, I entered the commands suggested by nitstorm and got "command not found". Followed link to source forge.net and test disk, followed the instructions to install and run test disk which repaired the boot sector in the vista partition, I can now choose to boot into win or ubuntu.
View 6 Replies
View Related
Oct 22, 2010
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies
View Related
Jan 24, 2010
I am currently rebuilding a couple laptops and a desktop to dual boot Windows and Suse 11.2. Windows is installed on partition 1. On the laptops, the build goes fine and dual boot with grub is OK. No issues. But on the desktop, the exact same build (after all the on-line updates, etc) fails with "Operating system not found" on the final (and first) boot. It seems that the Suse 11.2 build is somehow resetting the active partition and the boot does not see grub or Windows. When I reset partition #1 back to "active, only Windows loads. So I guess I need to fix this by reinstalling grub. Or use the Windows boot loader.
(1) Where is grub located on my system?
(2) What partiton is the Linux master Boot record If I wanted to use the Windows boot loader and do the following command to grab the 512 bytes I need:
dd if=/dev/sna? of=grub.bin bs=512 count=1
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
[code]....
View 9 Replies
View Related
Feb 11, 2010
I just installed SUSE 11.2 as dual-boot with WinXP on an older system that has a 160GB PATA drive and a 500GB SATA RAID drive. I left about 80GB on the PATA drive unpartitioned to accommodate SUSE. During the initial installation attempt, SUSE was determined to install on the RAID drive instead of the PATA drive, so I disabled the SATA drivers in the BIOS to force the installation on the PATA drive. This was successful, but now there is no access to the RAID drive from SUSE because there is no driver and it is not mounted. I reactivated the SATA drivers in the BIOS and the RAID drive reappeared in WinXP with everything intact. The SATA drives now appear in SUSE under Hardware Information as "/dev/sdb" and "/dev/sdc" and the listed driver is "sata_sil".
So how do I get the RAID drivers installed in SUSE and then mount the drive so it can be browsed/modified from Dolphin? I would also like to be able to browse/change this drive from other computers on my home network through samba, just like with WinXP.
View 9 Replies
View Related
Nov 23, 2010
I recently bought a portable with a Windows 7 system.I want to install openSUSE 11.3 but I also want to keep Windows 7 - so I need to install a dual boot system.On my desktop I have GRUB with Windows XP and openSUSE 11.3 and all works fine.How do I proceed ? I did not find much documentation yet, but maybe I looked in the wrong places.
View 7 Replies
View Related
Nov 19, 2010
I would like to recover my grub installation in a dual boot system. if there is an easy way to recover grub using flash disk? If yes is your suggestion opensuse developed? (currently running 11.3) . It would be nice also to have some gui just to make things easier. If not I assume that then the only option is the boot from dvd. Is that right?
View 9 Replies
View Related
Mar 14, 2011
I have a dual boot laptop with OpenSUSE and Ubuntu. The boot loader used is Ubuntus Grub that came with the Ubuntu installation.
I have done a zypper dup and upgraded to OpenSUSE 11.4. When I reboot my system I can no longer boot into OpenSUSE, Grub says something about a missing kernel.
I think I understand whats wrong here; the OpenSUSE entry in Grubs table hasn't been updated with the changes brought in by the zypper dup (new kernel i guess).
I'm I correct to assume this? How do I fix the problem? Booting into Ubuntu I tried to find /boot/grub/menu.lst to examine it by I cannot find it. I know Ubuntu use a newer version of Grub, does it have a different file layout?
View 1 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Oct 16, 2010
I want to upgrade to 11.3 but save my desktop and settings from 11.0. How can I do that?
View 3 Replies
View Related
Feb 23, 2011
So heres the thread i had a while back ( url) that had you guys help me setup the pretty standard dual boot of Win 7 and Ubuntu. I have 2 hard drives, main one (640gig) and backup (80gb). I have Win7 installed on the 640 and ubuntu on the 80.
So i have tried installing the SP1 twice today and it has failed. When i click on details on why it failed, it says: url
I can only imagine that this has to do with my Dual Boot. Is there anything i can do or am i stuck? I THINK that my grub and master boot and all that was on the second hard drive and it is the first drive in line to boot up...so i thought i wouldnt have any issues. Not totally sure though.
Im tempted to just remove Ubuntu, its cool to say i have it, but i honestly havent loaded up onto it more than 5 times since i installed it. When you have windows already...its near impossible to want to get onto a free OS that doesnt have the codecs or programs and im not familiar with it. If it was all i had though, (aka didnt own Windows) then obviously it would be my main OS and im sure id love it and have is customized and perfect.
View 9 Replies
View Related
Dec 10, 2010
I am having 320G of HDD , on the HD i m having 40G free space when i m trying to install rhel5.4 in the free part it is showing me this error
Could not allocate partitions as primary partitions: Partitioning failed: Could not allocate partitions as primary partitions.Not enough space left to create partition for /boot.
View 2 Replies
View Related
Nov 26, 2010
I have a machine with 2 hard drives, one with Vista installed and the other empty, ready to host an Ubuntu installation. I want my system to dual boot. When I boot via the Ubuntu 10.10 CD I am presented with two choices : install Linux to SCSI1 (0,0,0) (sda) using the entire disk, or to SCSI2 (0,0,0) (sdb) with 50% of the disk designated as Files and the other 50% designated as Ubuntu. Which one do I choose?
View 9 Replies
View Related
Apr 16, 2011
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
View 9 Replies
View Related
Jun 15, 2011
I have just downloaded Ubuntu 11.04 and am trying to install it on a dual boot system with Windows Vista. I get as far as "Allocate drive space" but there are no partitions to choose from. I currently have Windows and Linux Mint on the hard drive and want to install Ubuntu in the same partition as Mint to overwrite it.
View 9 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jan 7, 2011
Today, I was downloading some stuff from online. I left for a few minutes and came back to find that someone had hit my loose power cord, causing the computer to restart. When I completed the reboot (It always says "Insert system disk and press enter" after checking CD drives), and had it load OpenSuSE 11.3 Failsafe (Regular won't work for me), it loaded into Teal (BASH, Command Prompt, Kommand, whatever you want to call it). At first, I thought maybe I screwed up and told it to load into that. But, I tried again, and it did the same. I tried using Non-Failsafe, and got the same results. I am able to edit, add, or remove programs from the Linux partition, though.
View 3 Replies
View Related
Sep 20, 2010
I currently have Ubuntu 10.04 LTS installed on my PC. The details of how it got installed I cannot explain... I installed it on a HD that was not partitioned and I accepted all the defaults that Ubuntu suggested. So as far as I know right now Ubuntu "owns" the whole HD.
I now would like to create a dual-boot system by installing openSUSE 11.3 alongside Ubuntu 10.04 LTS. By reading things here and there, my guess is that I need to create a partition for openSUSE by shrinking the one for Ubuntu. But I am really not sure.
So I downloaded the CD version (GNOME) only of openSUSE, launched the installer and the process came to the following suggestions which is basically all Greek to me:
* Delete partition /dev/sda1
* Create root volume /dev/sda1 with ext4
* Create volume /dev/sda3 for /home with ext4
* Use /dev/sda5 as swap
As I said before, what I would like to do is install openSUSE side-by- side with Ubuntu and create a dual-boot system. I do not want to delete Ubuntu! I got scared by that "Delete partition /dev/sda1" thing mentioned above and so I aborted the installation.
What is the installer suggesting? Has it realized that I already have Ubuntu installed and that I want to create a dual-boot system?
View 9 Replies
View Related
Dec 8, 2009
I recently installed Suse 11.1 from the Live CD on an older PC. Suddenly, when booting up yesterday, the system announced corrupted IPtables and didn't load KDE. After login, I tried commands like KDE, run KDE but the bash didn't understand the commands.
So I booted from the live CD, but I can't find an option in the install menu to repair the existing installation. The help in the boot-up screen claims there should be an install option, but it doesn't show it at that point, only after KDE has started from the Live CD.
Since I've already made some changes (newer firefox, downloaded thunderbird etc.), I would like to keep and repair the current installation, instead of a new installation.
I don't however understand enough about the automatic partitions I'm being offered in the installation menu to know what to choose to keep the existing files. I did choose the offered automatic partitions the first time, and have now several partitions, home swap and so on.
Second question: While 11.1 was still running nicely, I could not find the option to upgrade to 11.2 in the Yast menu (I don't know any batch commands, so I only use Yast for installation). Looking at the download sites on opensuse on the internet, I saw an update option, but when I tried to add that URL to the Yast repository, it somehow didn't work. I also didn't see a nicely packed .rpm or similar update package.
Third problem: I downloaded a newer version of Firefox and Thunderbird and after some tries got Yast software repositories to install them. But the Avira antivir tar.gz package I downloaded, did not appear on the Yast repository manager. Doubleclicking to Ark didn't work, and when I went to console and tried to run the install file in the zipped package, it wanted parameters, and I didn't know what to answer.
View 6 Replies
View Related
Jun 19, 2010
I installed OpenSuSe 11.2 x64 on my PC.It's not work will:After installation, the system auto login KDE GUI.but when I reboot(or shutdown and open) my computer. Message on screen meaning:"can't find bootable partition".My PC's hardwareMother Board: DFI 790FXB-M3H5(South Bridge: SB750)Hard Disk: WD 500G*2 Raid 0(via SB750 Chip function)Oh, I'm sorry, It's Fakeraid, not hardraid.
View 9 Replies
View Related
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Jul 21, 2010
It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
View 9 Replies
View Related
Feb 27, 2010
I recently built a new rig and wanted to make it dual boot with W7 & OS 11.2. I installed W7 and partitioned my drive with 30 gigs I anticipated using for the 11.2 install. OpenSuse will not recognize it or allow any changes to that hard drive.
View 9 Replies
View Related
Jan 19, 2010
ere's my issue I've got an 80GB SATA drive and a 320GB IDE drive, I've already installed Windows 7 on the SATA drive. 80 is too small (in my opinion) to dual boot openSuse and Windows 7. Can someone explain me how to use a partition from the 320 IDE to install openSuse, and how to setup grub so I wouldn't have any problems booting to Windows?
View 4 Replies
View Related
