OpenSUSE Install :: GUI Will Not Load - Blank Screen On Live Boot
Jul 1, 2010
I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
View 2 Replies
ADVERTISEMENT
Mar 18, 2011
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
View 9 Replies
View Related
Dec 14, 2010
I just built a 11.3 live usb stick using kde amd64 image. I can go through a full boot up, but when X start I get a blank srceen(Samsung SyncMaster PX2370) on my desktop. I really do not know where to start.
View 4 Replies
View Related
Nov 13, 2010
A surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies
View Related
Mar 28, 2010
Since 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
View 6 Replies
View Related
Apr 18, 2010
I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.
Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB
Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.
I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.
View 9 Replies
View Related
Aug 1, 2010
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
View 3 Replies
View Related
Nov 4, 2010
For some reason, sometimes after I just turn the computer off by pressing the power button while hooked up to the video mount, I'll turn the computer on and (after it automatically logs into the standard user) come to a blank black screen. The only thing I can access is by pressing Alt+Tab to get a "no present windows" window, and thats it. Could it be that an activity or something has been deleted somehow?
View 1 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Jun 19, 2010
i am trying to install opensuse 11.2 to my vaio laptop i have win7 pro 64 bit already installed so i'm trying dual booting i have followed the below steps1- on windows, shrink the c partition and create a new unused volume for suse2- install the suse 11.2 on the new unused volume with hdd config like sda4 swap 4 gb sda5 20 gb / ext4 sda6 120 gb ext43- selected custom packages and started the installaton4- installation started smoothly and after installing packages it tried to reboot the machine at the end. But after this point the reboot operation has failed and gave a blank screen.
At the end the installation failed.I started the machine vaio boot logo comes and stops. i can't even enterbios setup or change boot options.I have unplaged the hd reset the partions, pluged it again and recovered win7So i think the installation damaged the file system.i have tried the above steps 2 times and came up with the same result.I have installed fedora 13 before with no problem.
View 9 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Jan 1, 2011
I've made a Live CD of version 10.04 on a machine running 10.04 (amd64). The disk boots fine on a 2nd machine but does not boot on the machine that created it. The CD/DVD is new and works for other things so I don't think it is this. The Live CD gets to the ISOLINUX screen but instead of "Loading" the screen goes blank and the system shuts down. I've tried everything I can think of (the disk works fine on another machine).
View 3 Replies
View Related
Oct 9, 2010
I'm trying to test out using xubuntu 10.04 on my one computer and keep getting a black/blank screen after selecting the 'try' menu option.Is there a way to fix this?I have tried some of settings via F6 with no luck.
FYI -The CD works fine as I have tested it on other machines.The version I am trying is xubuntu x86 (although I have tried ubuntu 10.04 x86 with similar results).I can Alt+Ctrl+F1 fine and get to the cmd prompt
View 1 Replies
View Related
Mar 19, 2011
i just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies
View Related
May 4, 2010
I installed a new graphic card from ATI 5770 (Club3D). After I did it I removed the propriatery ATI drivers I had installed thru the "Hardware Drivers" in Ubuntu and rebooted. Then I couldn't get into ubuntu again. When it starts booting the display just shuts down and says "Power Saving mode". The computer continues to load things etc. left it running and hoped it would show itself... nothing.
Anyway this happens everytime even with Live CD so I can't even get to a terminal... Started the boot without the splash and it went blank after it started some Speech thing. Just before that there were a few firmware files missing.
View 8 Replies
View Related
Apr 11, 2010
I've been trying out linux distros to see which I want to progress further with. I have a bunch of removable HDDs. I put a single distro on each HDD. I just installed CentOS 5.4 on a machine that has had successful installations of Debian 5.0.3, Fedora 12, and OpenSuse 11.2 installed on it. I still have those HDDs and they still boot and run fine.
CentOS 5.4 installed in graphical mode just fine. I even noticed that it appeared to probe my video card (ATI Radeon 9250 AGP) just fine. I removed the media and rebooted and the CentOS graphics came up fine, and it asked me a few questions such as could I hear the sound. Everything went fine when it said it was now booting to CentOS for the first time, and the screen went blank. The monitor LED stayed green, however, so it looks to me like the monitor still sees a signal.
I'm guessing I need to boot into text mode and fiddle with the display settings, but I'm pretty much lost there.
I did a lspci under Fedora and it lists the following for video:
let me log out of my dang XP machine, and cut and paste the entire stuff straight from the machine I installed CentOS on which is now running Fedora 12.
View 3 Replies
View Related
Nov 19, 2010
I just recently got a Dell Inspiron 1525 laptop and have installed Debian on it. When I installed it, I did not install the 'Graphical desktop' packages...only the 'Standard system utilities'Everything has been fine, however when I installed Xorg (aptitude install xorg) and restarted my computer, my screen goes blank at bootup. I can see the grub menu, as well as the beginning bootup process, up until udev begins to load. I have a feeling it has something to do with KMS now being loaded but am not sure.
View 7 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Apr 15, 2010
So I Installed OpenSUSE A Plethora Of Times. In Both 32 & 64 bit. But No Matter What After It Boots Up And Where I Should See Some Kind Of User Interface The Screen Is Blank. Now this Is The Point Where You restart The Computer And See Where You Went Wrong But Come to find Out My Power And restart Buttons Dont Respond So i Have To Pull the Battery Out Of My Laptop.
View 4 Replies
View Related
May 7, 2010
After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:
1. Boot from Live cd of opensuse 11.2
2. Mount the partition which has root.
3. check for and delete Xorg
[code]...
View 4 Replies
View Related
Jul 5, 2010
i installed, few days before susu 11.2 . now my lcd only has resolution of 800x600, so i type "sax2". after he made that config, suse displayed me a gui, where i can change resolution and my frequency. i selectet native resolution and freq. (the right nvidia driver and lcd was detectet) and hit that apply button, then i needs to restart. done it, but then i got after that loading bar of suse only blank screen. so what was wrong ? and what i can do now to fix ?
View 2 Replies
View Related
Aug 29, 2010
I have the problem (11.3) that the screen is blanked after 10 minutes (console and KDE). After some searching, I found out, it is a kernel "feature". Since it is a server, which should display network status permanently on screen this behavior is fatal.
I have tried:
- switch of power features vie Grub kernel param: apm=off, powersaved=off
- in kde via screensaver options
- in term "setterm -blank 0"
View 9 Replies
View Related
Apr 3, 2011
I just tried to upgrade from 11.3 to 11.4 Using iso on DVD. All went well until the stage where the screen says something like "rebooting from installed system" when the screen just went blank. After removal of the DVD and re-start of the system, selecting the normal Desktop from the boot menu just returns me to the blank screen. I never see a login screen.
Selecting Failsafe caused what appeared to be a complete normal sequence with a Login that worked and I ended up in KDE4 (my usual desktop) with everything apparently working, even WIFI. But the next time I re-booted and selected Failsafe I just got a command prompt. I now find that selecting Failsafe alternates between the GUI and a command prompt on each attempt!
[Code]...
View 8 Replies
View Related
May 11, 2011
After I install SUSE I reboot and click on Desktop it then goes to a loading screen. After that it scrolls a lot of info then the screen goes blank. I have no idea why and I have tried it on 3 different computers with the same problem.
View 3 Replies
View Related
Jun 8, 2011
I recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
View 9 Replies
View Related
Jul 18, 2010
I just installed 11.3 on a Toshiba Satellite A305 laptop. After going through the install process it restarted (without a full reboot I believe) and spent a very long time going through a bunch of message. E.g. it spends about 10-15 minutes building java fonts, and warning me that Japanese/Chinese/Korean might not work in Java.About 20+ minutes after bootup it finishes with all the status messages (including a message that said it couldn't execute /usr/bin/cmp !?) and goes to a blank screen with a mouse sprite -- first a spinning circle, then a regular arrow sprite. So it's not a totally black screen, but all I have is the mouse sprite.
I let it sit there for over an hour.I think it was hitting the disk but nothing happened. I tried rebooting and it did the same thing.I tried setting the "nomodeset" boot parameter, which had helped someone with a similar problem no change.I tried it in failsafe mode no change.
View 9 Replies
View Related
Jan 7, 2011
I have installed a new PC system
- OpenSuSE 11.3, 64bit
- AMD Phenomen II X4
- ASUS M4A88TD-V Evo/USB3
- 3 hard disks
- etc.
After start-up with runlevel 3, no applications running, network is up, the overall power consumption of the PC (without monitor) is ca. 70 Watt. After some minutes the monitor goes to power saving (terminal mode, runlevel 3 !), but the power consumption rises to 120 Watt! After pressing a key on the keyboard (e.g. Num) the monitor leaves the power save mode, shows the login screen, and the power consumption falls to 70 Watt. In parallel I have investigated the system via ssh and running top, but I have not observed any abnormal operation. I looked into /proc/acpi/* but I did not find something unusual.
View 5 Replies
View Related
Apr 4, 2011
i just installed opensuse 11.4 on my system(gigabyte 7n400pro2,amd athlon xp 2.8ghz,ocz vertex2 ssd,ati radeon x1550) and i have this strange problem: the screen gets blank(for about a second) every 40-50seconds. everything else works fine.
View 5 Replies
View Related
Aug 7, 2011
Just installed 11.4. First effort with OpenSuse but have previously used Ubuntu on another machine. Installation went great. After I log in the screen goes blank with just a mouse cursor, everything else is black. Boots okay in recovery mode.
This is a dual boot with Windows XP. Machine boots into windows as expected.
View 8 Replies
View Related
