OpenSUSE Install :: 11.2 On Fake Raid 0 Can't Load Boot?

Jun 19, 2010

I installed OpenSuSe 11.2 x64 on my PC.It's not work will:After installation, the system auto login KDE GUI.but when I reboot(or shutdown and open) my computer. Message on screen meaning:"can't find bootable partition".My PC's hardwareMother Board: DFI 790FXB-M3H5(South Bridge: SB750)Hard Disk: WD 500G*2 Raid 0(via SB750 Chip function)Oh, I'm sorry, It's Fakeraid, not hardraid.

View 9 Replies


ADVERTISEMENT

Ubuntu Installation :: NTFS Error Stops Dual-boot Install On Fake-raid?

Feb 23, 2011

I am attempting to install Maverick on an older pc. It has (2) mirrored 153 GB SATA drives. I set aside 33GB for a linux partition, by shrinking the partition in Vista.

Choosing to "Install along side windows" is not an available option. I can only choose use who disk, or use empty area. I choose use the empty area, and the Ubiquity installer gets hung up when attempting to format the empty space as EXT4. When I scroll up on the output I notice some error messages referencing NTFS. When I use Gparted it shows a possible problem.

Quote:

Warning:
The device /dev/sda1 doesn't exist
ntfsresize v2.0.0 (libntfs 10:0:0
ERROR(2):Failed to check 'dev/sda1' mount state: No such
file or directory
Probably /etc/mtab is missing. It's too risky to continue. You
might try an another Linux ditro.

Unable to read the contents of this file system!Because of this some operations may be unavailable.

The following list of software packages is required for ntfs file system support: ntfsprogs.

I ran chkdsk /r on the Vista partiton, in case there was a problem there. The issue still persists.

View 2 Replies View Related

Ubuntu :: Fake Raid STILL Can't Partition In 10.04 Installer?

Jul 16, 2010

Been attempting to install ubuntu on my Intel fake raid on a new PC.The installer sees the raid, but errors out:Quote:The ext4 file system creation in partition #1 of Serial ATA RAID isw_ehbgbddej_Volume0 (mirror) failed.This seem to be the EXACT issue described in this bug report:I read all the way down this bug report, and at the bottom it says:Quote:Launchpad Janitor on 2010-06-25Changed in parted (Ubuntu Lucid):status: Fix Committed → Fix ReleasedA few weeks ago, a fix was "committed" and "released". I had been working with an earlier 10.04 ISO, so I downloaded 10.04 from the web site today. Still the same problem.Maybe I'm just reading the bug report wrong? If it says the fix is committed and released, I would naively assume that it is fixed. Do I need to patch to apply the fix or something? Doesn't seem likely.

View 3 Replies View Related

Ubuntu :: Correct Drivers To Work With Hardware / Fake Raid?

Aug 2, 2010

I ve got a SATA HDD which I use for storage connected to a (now quite old) RAID PCI card (HighPoint Rocket RAID 1520). Ive added another (blank) HDD, same brand and size to the PCI card. Ubuntu (10.04) can see both hard drives and access data. Id like to mirror (raid 1?) these HDDs. Looking around this forum Ive noticed quite a few people mentioning FakeRAID. Turns out that's not quite the same as software RAID. Given how cheap the 1520 was, I suspect it's FakeRAID rather than Hardware. Perhaps someone can confirm? Given Ubuntu can see both HDDs, would this mean it ll have the correct drivers to work with a hardware/fake raid? A common recommendation is to use mdadm to create a software RAID. How does this work for partitions accessed from multiple Operating Systems including Windows XP?

View 3 Replies View Related

CentOS 5 Hardware :: Fake Raid Versus Hardware Raid After A Hardware Failure?

Oct 12, 2010

Recently while using a Highpoint 2310 (raid 5) I lost the mother board and CPU. I had to reinstall Centos and found it needed to initialize the array to function. Total loss of date. Question: If I use a true hardware card (3ware 9650se) and experience a serious hardware loss or the C drive can the card be installed with the drives on a new motherboard and function without data loss even if the OS must be reinstalled.

View 4 Replies View Related

General :: Unable To Access Intel Fake RAID 1 Array In Fedora 14 After Reboot

Jan 6, 2011

1st I am relatively new to linux (but not to *nix). I have 4 disks assembled in the following intel ahci bios fake raid arrays:

2x320GB RAID1 - used for operating systems md126
2x1TB RAID1 - used for data md125

I have used the raid of size 320GB to install my operating system and the second raid I didn't even select during the installation of Fedora 14. After successful partitioning and installation of Fedora, I tried to make the second array available, it was possible to make it visible in linux with mdadm --assembe --scan , after that I created one maximum size partition and 1 maximum size ext4 filesystem in it. Mounted, and used it. After restart - a few I/O errors during boot regarding md125 + inability to mount the filesystem on it and dropped into repair shell. I commented the filesystem in fstab and it booted. To my surprise, the array was marked as "auto read only":

[Code]...

and the partition in it was not available as device special file in /dev:

[Code]...

View 1 Replies View Related

Hardware :: SATA / PATA Fake RAID Highpoint 1640 Slow In Writing

Oct 20, 2010

I've been, for some years, an happy user of Highpoint HPT374 based RAID cards, using RAID 5 with decent performances (constantly around 90 MB/sec in read, and 60 MB/sec in write ). Old Athlon mobo , with 2.6.8 kernel. Now the mobo is dead, so I've got an Asrock A330GC (dual proc with 4giga ram), installed Debian with kernel 2.6.26 and moved the controller and disks , and the performances have dropped to a painful 9 MB/sec in write, measured with dd of a huge file (interrupted with kill -USR1 [pidof dd]).

Read performances are still around 90MB/sec, using hdparm -t , repeated many times , figures are constantly around 90MB/sec. I suspect some libata issue , in old kernel the raid was seen as hdb, now is sdb, some driver(s) of the PATA disks may be responsible. I've used the driver, from Highpoint v2.19 , the latest driver is broken (causes kernel oops during format of raid), I've informed Highpoint.

Here some info :
hdparm -i /dev/sdb :
HDIO_GET_IDENTITY failed: invalid argument .

lspci :
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) .....

View 2 Replies View Related

OpenSUSE Install :: How Installer Of 11.3 Deals With INTEL ICH10R Fake RAID0

Jul 15, 2010

I have two 150GB WD Raptors stripped in an INTEL ICH10R RAID0 array. Windows 7 is installed on it in a 100GB partition, there is a 150GB secondary partition, a 100MB system reserved partition created by Windows 7 and there is about 25GB unallocated space to install a linux distribution.My problem is the fake ICH10R RAID which does work only at the moment for me with Fedora Core 13 : Ubuntu 10.04 breaks it but i do not like FC13 very much. So i Googled and Googled for installation problems on this fakeraid and dmraid is involved there is a bug in it at least in Ubuntu 10.04 and openSUSE 11.2, with 11.3 my RAID is detected -> i have a MD RAID popup.

My question is : How to install properly 11.3 on the space left on my fake RAID array without breaking anything although i have a full backup of my system. I don't understand anything of the partitioning part of openSUSE in general. Do i must activate MD RAID, i tried once and my NTFS partitions were not displayed but RAID was detected with the correct size. I am totally lost with this installer.

View 8 Replies View Related

OpenSUSE Install :: Fake-RADI0 Detected By Yast But Not Mounted After Restart

Apr 20, 2011

I have fake(bios) raid0 with Windows XP and third non-raid hd which I wanted use to install linux to (as I read about problems with installing grub into raid0). During installation Yast had correctly detected raids and all windows partitions (basically its divided into two raids with 2 partitions of 1st and 3 on 2nd) and even proposed mounting them at /windows/c, /windows/d and so on. Now I have OpenSuse 11.4 installed, grub at /boot on sdc but to log to system I need to use installation disc (otherwise Windows starts up). What I wanted to do is follow this tutorial to add grub to Windows bootloader: Boot Multiboot openSUSE Windows (2000, XP, Vista - any mix) with Windows bootloader. Problem is after reboot partitions are not mounted (dirs exists but nothing there) so I cannot copy boot code to windows. I read that fake raid may need special drivers but when i start Yast->system->partitions it again shows everything correctly!

fragment from partitions section in Yast (I translated/removed non-important entries as I have non-English system so it may vary from what is actually in Eng version):

Code:
Device: /dev/md125p1
Size: 48.83 GB
Device path:

[Code].....

View 7 Replies View Related

OpenSUSE Install :: RAID Driver In Dual Boot System?

Feb 11, 2010

I just installed SUSE 11.2 as dual-boot with WinXP on an older system that has a 160GB PATA drive and a 500GB SATA RAID drive. I left about 80GB on the PATA drive unpartitioned to accommodate SUSE. During the initial installation attempt, SUSE was determined to install on the RAID drive instead of the PATA drive, so I disabled the SATA drivers in the BIOS to force the installation on the PATA drive. This was successful, but now there is no access to the RAID drive from SUSE because there is no driver and it is not mounted. I reactivated the SATA drivers in the BIOS and the RAID drive reappeared in WinXP with everything intact. The SATA drives now appear in SUSE under Hardware Information as "/dev/sdb" and "/dev/sdc" and the listed driver is "sata_sil".

So how do I get the RAID drivers installed in SUSE and then mount the drive so it can be browsed/modified from Dolphin? I would also like to be able to browse/change this drive from other computers on my home network through samba, just like with WinXP.

View 9 Replies View Related

OpenSUSE Install :: Cannot Boot LiveCD When Hard Drive Mode Is RAID

Jul 29, 2010

I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.

When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)

View 9 Replies View Related

OpenSUSE Install :: Dual Boot On A Mac - Can't Load The System

Mar 20, 2011

I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.

At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment

View 9 Replies View Related

OpenSUSE Install :: System Load Order During Boot?

Aug 16, 2011

I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.

View 3 Replies View Related

OpenSUSE Install :: GUI Will Not Load - Blank Screen On Live Boot

Jul 1, 2010

I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.

I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.

View 2 Replies View Related

OpenSUSE Install :: Boot Screen Doesn't Show And Installation Media Won't Load

Jun 7, 2010

I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.

Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.

View 7 Replies View Related

OpenSUSE Install :: Unable To Re-load Grub Following Windows 7 SP1 Upgrade On Dual-Boot?

Apr 28, 2011

A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.

I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.

FYI the PC has a single SATA disk installed partitioned as follows:

dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT

View 8 Replies View Related

OpenSUSE Install :: WPN111 Wireless Adapter And NETGEAR - Make The Module Load Automatically On Boot ?

Feb 14, 2011

Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-

1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).

2. sudo ndiswrapper -i netwpn111.inf

3. sudo ndiswrapper -m

4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).

2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.

View 1 Replies View Related

Ubuntu :: Install Drivers To Install / Boot After Installation From Raid Drives

Mar 1, 2011

Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?

View 1 Replies View Related

Ubuntu :: Raid Install Won't Boot?

Dec 13, 2010

Did a CD install, 64 bit Ubuntu 10.10 on Intel dx38 MB with Intel raid on two 160g drives.

I setup the raid drives (raid 1 mirrored) prior to installing. Install went without problems. On reboot the volume will not boot. I brought up again from CD and the volume is clean and mountable. There are two partitions - dm-1 and dm-2 swap

What can I do to make this boot?

View 1 Replies View Related

Slackware :: Windows Raid-O Install Virtualbox, Will Slackware Install Raid-o Without Raid Driver?

Feb 28, 2011

If I have a windows installed in raid-0, then install virtualbox and install all my linux os,s to virtualbox will they be a raid-0 install without needing to install raid drivers?

View 1 Replies View Related

Ubuntu :: Install Failure - Nvidia Raid And No Boot?

Sep 13, 2010

on my pc, that was running WinXP, I thought of installing Ubuntu. (I did install linux already a few times in the past years and use it on another couple of pcs) But something went wrong. This machine has 2 x 200MB maxtor drives, in raid 0 configuration, supported by the motherboard Nvidia chipset, and working well in Windows. When ran the live Ubuntu 10.04 cd, gparted was not able to access the drives in raid configuration, until I installed the mdadm and kpartx packages then the existing data became visible. So after that initial moment I thought all was ok and proceeded to install Lucid on the machine, dual booting with Windows. I did partition manually so that in my 400GB raid drive there is an 80GB NTFS partition with WinXP, a 90GB extended partition for Linux Ext4 and Swap and then a last NTFS 200GB partition for data. All went well, but now on restarting the computer nothing happens, nothing loads, Grub is not showing, and it looks like I cannot launch Linux nor Windows. All the data from WinXP and the Ubuntu installation seems to be on the disks but the pc is just not booting. I suppose the problem is with the raid configuration that is not handled properly during the installation, but is there anything that I can do now, apart from reinstalling Windows Xp or installing Ubuntu in a non raid configuration?

View 9 Replies View Related

OpenSUSE Install :: Can't Install On Machine With Intel Raid Controller

Jul 20, 2010

I cannot install 11.3 on a machine with an intel raid controller I have tried with raid 1 using the card and then setting the disks to individual raid 0 and letting suse raid them. With the card doing it the machines crashes as soon as it tries to boot the first time, with suse doing the raid I just get 'GRUB' on the screen It seems a lot of people are having similar problems, does any one have any pointers. 11.2 installs fine. I would try and do a bug report but every time I go to the page it's in Czech

View 4 Replies View Related

Ubuntu Installation :: Dual Boot - Win 7 And 10.10 On Raid 0 - No Raid Detect

Nov 26, 2010

I have installed Ubuntu on my m1530 since 8.04 and currently dual boot Win7 and 10.10. I would like to dual boot on my PC, but I have run into a problem. I am not a pro at Ubuntu, but this problem I can not solve by reading forums like I have in the past.

I realize this is a common problem, but I have noticed people having success.

I have a M4A87TD EVO MB with two Seagate drives in Raid 0. (The raid controller is a SB850 on that MB) I use the raid utility to create the raid drive that Windows7x64 uses. I have 2 partitions and 1 unused space. Partition 1 is Windows, partition 2 is for media, and the remaining unused space is for Ubuntu.

I am running ubuntu-10.10-desktop-amd64 off a Cruzer 16GB flash drive that was installed via Universal-USB-Installer-1.8.1.4.

My problem like so many others is that when I load into Ubuntu, gparted detects two separate hard drives instead of the raid. I read that this is because kpartx is not installed on 10.10. I then went in LiveCD mode and downloaded kpartx from Synaptic Manager. Gparted still reported two drives. I opened terminal and run a few commands with kpartx. I received an error. (Forgive me I didn't write it down, but I believe it said something about a communication error. I will try again later and see.)

Currently I am reflashing the Cruzer with a persistence of 4GB. I am not familiar with this process, but I understand that my LiveCD boot will save information I download to it. I decided to try this method because I was going to install kpartx and reboot to see if this made a difference.

I am looking for any suggestions on a different method or perhaps someone to tell me that the raid controller or some hardware isn't supported. I did install ubuntu-10.10-alternate-amd64 on my flash drive, but fail to get past detecting my CD-ROM drive since it's not plugged in. If this method is viable, I will plug it in. I also watched the ..... video were a guy creates Raid 0 with the alternated CD, but it wasn't a dual boot and didn't use a raid controller from a MB.

View 6 Replies View Related

Debian Installation :: Will Not Boot After Install On Areca ARC-1110 RAID

Dec 1, 2010

I performed an install using the 5.0.6 amd64 netinst cd on a dual opteron server with an Areca ARC-1110 4-port SATA hardware RAID card. I have 2 250GB drives set up as RAID 1. The debian install saw it as only one drive, just as it should. Install went smoothly, but on reboot, the system would not load.

I did some research and tried a couple of things with no luck. Like adding a delay in the grub command. It jus sits at loading system for a while then times out and loads busy box. Just to check things out, I booted into an Ubuntu live-cd and mounted the volume. The file system is there and all of the necessary files. How to use one of these cards successfully?

View 2 Replies View Related

Ubuntu Installation :: Boot Disk Image For Install On AMD RAID PC?

Sep 3, 2010

I tried installing Ubuntu 10.04 WS on my PC but it did not see any disks to install on. I believe this is because my drives are all configured as RAID. My mobo is an Asus M3A78-EMH HDMI AM2+ socket with an Athlon 2X 5000+ CPU. The chipset is AMD 780G. I have the BIOS configured for RAID drives and I already run Win XP x32 and Win 7 x64 on it. My boot drive is configured as 'RAID READY' and I have 2 RAID 1 disks consisting of pairs of SATA drives.

From what I have researched it seems that with some tuning it should be possible to install Ubuntu 10.04 but I have little Linux experience and don't want to mess up my existing drives. I have installed Linux before a few times and run it but never with RAID. Is anyone aware of an existing disk image that I will be able to install from on my system or would it be possible for someone to create one for me to use?

View 4 Replies View Related

Ubuntu Servers :: Install Boot Loader Into RAID 10 Setup?

Oct 3, 2010

i installed ubuntu server on a 4-hard disk system, i installed with the RAID 10 support that comes with 10.04 server optioon. my raid swap is /dev/md0 and my raid data partition is /dev/md1

hard drives are /dev/sda /dev/sdb /dev/sdc /dev/sdd

the instalation goes fine, from the 8TB im getting 4TB mirrored which is what i want,
but the instalation setup goes up to the point where it asks me to install grub boot loader, There i choose the default option and it does a fatal error.

my main goal is just to make it bootable, any method is welcome. this went beyond my RAID knowledge (more conceptual than technical)

View 2 Replies View Related

Ubuntu Installation :: Wish To Install As Dual Boot On A Nvidia RAID

Jun 2, 2011

I am currently with Wubi 10.04 under Vista and my Dell XPS 630i has a 1 TB Nvidia RAID controller.First image (Option A) suggests /dev/sda as device for boot loader installation, while second image (Option B) suggests /dev/mapper/nvidia_bcidhdja.I think that the way of keeping the RAID would be using Option B as the device for boot loader installation. Would Option A break the RAID instead?

View 1 Replies View Related

Ubuntu :: Unable To Boot Fresh Install On HARDWARE Raid 1

Aug 31, 2010

I am installing Kubuntu AMD64 10.04 on a 500GB Hardware raid1. After the install completes, the computer will try booting, but grub says "No such disk."

The motherboard specs are Here,

I have tried installing to this raid three times, each returning the results mentioned above. Does anyone know what is going on?

View 1 Replies View Related

OpenSUSE :: How To Load 11.3 Over 11.0 On A Duel Boot System

Oct 16, 2010

I want to upgrade to 11.3 but save my desktop and settings from 11.0. How can I do that?

View 3 Replies View Related

Ubuntu Installation :: RAID 0 And Win7 Dual Boot - Grub Cannot Install

Sep 13, 2010

I'm having serious troubles to install ubuntu-10.04.1. My raid is an hardware raid with intel chipset. Note that win7 is already installed and working with my raid. I made some space from windows, to install Ubuntu (40gb). First, I run the installer, everything seems to be fine. I choose to install Ubuntu were there is the most space free (sorry, I'm not sure about the real terms used there).

Then my partition with the vista loader appears. So the installer can see my raid, and should work fine (everything is detected correctly). But once I'm in the end of the installation (around 95%), a pop-up appears, and tells me that Grub can't install in /dev/sda and it's a fatal error. I can choose an another destination, but it doesn't seems to work.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved