Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 RepliesToday i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
Online Update is offered up 6 updates - only 2 succeeded (Mozilla and libpoppler). Here's the errors for other packages: kbd - Keyboard and Font Utilities (includes aaa_base update) Subprocess failed. Error: RPM failed: error: package kbd-1.14.1-20.2.x86_64 is not installed
php5: fix for several vulnerabilities Subprocess failed. Error: RPM failed: error: package php5-ctype-5.3.0-2.4.3.x86_64 is not installed
patterns-openSUSE: add susehelp to KDE base pattern
Subprocess failed. Error: RPM failed: error: package
patterns-openSUSE-file_server-11.2-20.22.1.x86_64 is not installed
KDE 4.3.5 Update
Subprocess failed. Error: RPM failed: rpmdb: PANIC: Invalid argument
rpmdb: PANIC: fatal region error detected; run recovery
[Code]...
when I am trying to install a RPM package I get the following error: failed to install file: [PK_TMP_DIR|dir:///var/tmp/TmpDir.w29lVZ] Repository already exists It tried to install DBVisualizer and Adobe Reader 9 and get the same error. Just the directory is different. How do I solve this? I tried to delete the mentioned directories but I can't find them on the file system.
View 4 Replies View RelatedI tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
View 14 Replies View RelatedAttempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I'm running 11.2 KDE 4.3.5, recently every time I've tried to use the Updater Applet I get this error after choosing to install an update: PackageKit Error internal-error: Installation aborted by user. Then I run YaST to try to manually install the update and get the following error:
Subprocess failed. Error: RPM failed: error: package kwin-4.3.5-0.2.1.i586 is not installed. Really unsure how to fix this but it's only blocking updates/patches, I can download new programs fine.
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
Using 11.0 64bit OpenSuse. I was updating this workstation. Everything was working good. I rebooted from the last set of updates and now I am trying to access the Package Manager from yast, but it is not working now. It starts up, then it goes to an "Initializing", then a popup says that "Accessing the Package Manager Failed". It also notes that something else is using the package manager, then gives me choice to either continue or retry.
View 3 Replies View RelatedWe installed 3 new rhel 5.5 systems yesterday; each of which are generating this error " Error: certificate verify failed" in response to a basic "yum update". From what I can gather, via a general search, this may be isolated to x86_64 -- however the references I found were specific to Satellite Server (which we are not using). Never the less, I checked the PATHs for the cert and they are correct. All of our 32 bit systems are running RHEL 5.5 and this is not a problem on any of them.
View 6 Replies View RelatedI had this issue with Fedora Core 13, so I switched my laptop back to OpenSuse and continued to have the problem. I can do a host lookup for software.opensuse.com and I get a correct response ...
Code:
linux-edxs:/etc # host software.opensuse.org
software.opensuse.org has address 195.135.221.150
linux-edxs:/etc # host download.opensuse.org
download.opensuse.org has address 195.135.221.134
Firefox works. Thunderbird finds my mail servers just fine. SSH works. But then when I try to do anything involving software updates or installation, I get ...
Code:
linux-edxs:/etc # zypper update
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata []
Download (curl) error for '[URL]':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
I've seen others here post queries about this, and I'll tell you what it was in my case: our DSL modem's DHCP server returns its own IPV4 address as the DNS server. When I looked at /etc/resolve.conf, I saw "nameserver: 192.168.50.254" on the last line -- the IPV4 address of our DSL modem. I manually inserted "nameserver" lines for our ISP's two actual DNS servers, and everything magically started working. Why this should confuse some software under Linux, but not other software, is a mystery. It also seems to be Gnome-specific (I didn't have this problem with OpenSuse 11.3 and KDE 4).
Ask if they're using Gnome, and ask them to check resolve.conf. A lot of DSL modems and home/small office routers return their own IP address (i.e., the same as the gateway address) for the DNS server on a DHCP query. The solution is to manually edit resolve.conf and put in your ISP's DNS server addresses manually. Incidentally, just my opinion, but Network Manager needs to make this an option. Under Windows, for example, you can select "automatically assign DNS" or you can enter them manually, even if you're using DHCP. It'd be nice if Network Manager permitted that.
trying to build Eduke32 from source but I receive the following error:
Code:
[priit@T16 eduke32]$ make
Build started using "gcc -fomit-frame-pointer -funswitch-loops -O2 -fno-stack-protector -W -Wall -Wimplicit -Werror-implicit-function-declaration -funsigned-char -fno-strict-aliasing -DNO_GCC_BUILTINS -Isource -Ibuild/include -Isource/jmact -Isource/jaudiolib
[code]...
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies View RelatedSuddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
Whenever I install something from the software center, I get this error:
installArchives() failed: Selecting previously deselected package lsdvd.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
[Code]...
However, the package itself succeeds with installation. Looks to me like it's a problem with a kernel I installed.
So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.
Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?
I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.
Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.
I just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.
View 5 Replies View RelatedI can't update anymore since a few days :
Download (curl) error for [URL]...
Error code: Connection failed
Error message: Failed to connect to 2a01:e0c:1:1598::1: Network is unreachable
I read somewhere that I should deactivate IPv6, which I did with no success. It seems to happen since I upgraded gnome following this link : Archive:GNOME 2.30 - openSUSE My Internet connection is of course alive and working.
I am a total newbie to Linux (I've only been using Ubuntu for a couple of months) and decided to buy openSUSE and give it a try. So I inserted the disk into my computer and accept the terms of service and stuff and then it said that it failed to excecute bcdedit.exe. I'm trying to install openSUSE by Windows 7 by the way. I've searched the forum and found a tutoiral, but it was for Windows XP which is totally different to Windows 7 and not even the application names are the same in the CP.
View 3 Replies View RelatedI have a few questions on installing of mydns on page-5 of Till's guide: (The Perfect Server - OpenSUSE 11.1 [ISPConfig 3] - Page 5 | HowtoForge - Linux Howtos and Tutorials)
cd /tmp
wget http://download.opensuse.org/reposit...8-1.1.i586.rpm
wget http://download.opensuse.org/reposit...8-1.1.i586.rpm
rpm -i mydns*.rpm
rm -f mydns*.rpm
Isnt there an error somewhere here? When i go ahead to:
[Code]....
The red updater icon alerted me to about a dozen patches, which started to install, then halted with an error: Download failure from download.opensuse.org/distribution/11.2/repo/non-oss. When I try to update repositories, the same error recurs for that repo and also for .../oss and download.opensuse.org/update/11.2/,
If I attempt to "register for support to get update repository," clicking on Configure Now and Next produces the same three error messages: "Failed to download", one for each repository. The screen then returns to Registration, with another error message "an error occurred while connecting to the server". Clicking on the Detail button show exactly "ERROR:"
This AMD desktop machine with this install of 11.2 has updated many times in the last few weeks. Has something changed? The update servers do respond to a ping, so they are up and apparently I have connectivity.
i try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I've been working to get gcc up and running on a new install of Fedora 13. glibc-devel had dependencies upon installation where it required glibc and glibc-common, both 2.12.1-3. No problem, found both at rpm dot pbone dot net. However, when I try to install the following circular dependency results... it doesn't matter the order of install.
Code:
[root AT localhost gcc_install]# rpm -ivh glibc-common-2.12.1-3.x86_64 .rpm
error: Failed dependencies:
glibc = 2.12.1-3 is needed by glibc-common-2.12.1-3.x86_64
[code]....
I am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
I am having an issue with KPackageKit, actually 2 issues but one makes it unusable. The major issue is that when I go to apply the updates I get the following error message (at least here are the details of the message)
Code:
Download (curl) error for 'http://download.nvidia.com/opensuse/11.4/repodata/repomd.xml':
Error code: Connection failed
Error message: Couldn't resolve proxy 'HTTP_PROXY'
I do not run my connection through a proxy and my internet works correctly. This is on a laptop I upgraded using zypper from 11.3 to 11.4 (I did the same with a desktop which does not have this issue). zypper refresh successfully refreshes the repositories, and the various Yast repo tools all work correctly. Additionally after I am shown the updates and am prompted for root pw, the packages will no longer show up for a while, each time it tries to look for updates the message comes through but they will show up after a while again. The other issue I have is that it requests my pw multiple times, this also happens on my desktop that actually will update. I get prompted twice, they are immediate and back to back. This one is a little minor annoyance but there should be no reason that it needs to make this request multiple times.
I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---
System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---
[code]....
OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".
To upgrade my system from 11.1 to 11.2, I followed he instructions at:openSUSE Lizards � Updating in Place From openSUSE 11.1 to 11.2
However, it failed and now I am stuck with this error:
Code:
zypper: error while loading shared libraries: libaugeas.so.0 cannot open shared object file: No such file or directory
I was installing wine but my computer suddenly shut off and now the installation is corrupted and when I try to install it again through ubuntu software center it tells me
"The installation could have failed because of an error in the corresponding software package or it was cancelled in an unfriendly way. You have to repair this before you can install or remove any further software." How could I fix this??