Slackware :: Unable To Find The Sources For Slapt
May 29, 2011I cant find some good sources for slapt Where i should looking for ?
View 3 RepliesI cant find some good sources for slapt Where i should looking for ?
View 3 RepliesHow can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.2
Deleting module version: 3.1.2
completely from the DKMS tree.
Done.
Creating symlink /var/lib/dkms/vboxdrv/3.1.2/source ->
/usr/src/vboxdrv-3.1.2
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at
/lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without:
Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
Code:
[root@nevada Downloads]# uname -r
2.6.31.6-166.fc12.x86_64
host: CentOS 5.4
guest: FC12
Virtual Machine: Virtual Box 3.1.4
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried:
# KERN_DIR=/usr/src/kernels
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
[Code]...
the slapt-get did not install any thing Ex..
bash-4.1# slapt-get --install vlc
Reading Package Lists... Done
No such package: vlc
[code]....
I'm sitting at work and wondering if Synaptic package manager could be used with slapt-get on Slackware since it's based on apt-get anyway. I haven't researched this, but I wonder if anyone out there has. I'm thinking that Synaptic looks for .deb packages but it would be interesting if one could make it work. The Gslapt/slapt-get combo works just fine for me as far as a GUI alternative, but apparently only works with .tgz or .txz. Or does it?
It would be interesting if one could install .deb packages because it would open up a whole lot repositories to Slackware including the Ubuntu repos. Don't get me wrong, I like compiling from source but nothing drives me crazier than finding some piece of software I like that ends up needing a million Gnome dependencies. I can definitely appreciate the reasons why Gnome was dropped from Slackware!
How do you install slapt-geton slackware 13.0
View 11 Replies View RelatedI noticed that slapt-get excludes a lot of package titles based on aaa, glibc, and kernel. I've been wondering why, and haven't been able to find any definitive answers... Anyone here have any ideas on why that is? My Slackware installation is currently kernel 2.6.29.6 (I think) and the newest available on the official repositories is 2.6.32.5 (or something like that).
When I put in slapt-get --upgrade it spits out about 15 packages that are excluded that it won't upgrade. Now, I know I can remove the exclusions by editing the slapt-get configuration file, but I don't want to if it's going to screw something up. So my question is: Is there a reason those are excluded? Is it unsafe to upgrade the kernel with slapt-get?
I am a newbie regarding the Slackware, though i have some millage on Ubuntu. Anyway, i have Slackware 13.1 and slapt-get is really, really slow when downloading packages, even when i do slapt-get -update the slowness is just killing me
The second question is somewhat different. How can i view dependencies on which a particular application is depended?
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies View RelatedI played a bit with the upgrade configuration files, to solve a couple of problems I have with Ubuntu 10.04, now when the upgrade procedure starts I getQuote:Failed to fetch Release Unable to find expected entry multiversdeb/source/Sources in Meta-index file (malformed Release file?)Some index files failed to download, they have been ignored, or old ones used instead.
View 9 Replies View RelatedI am getting virtual-box repository download error as given below:
Code: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. Repository: deb http://download.virtualbox.org/virtualbox/debian marverick non-free
I get an error when running slapt-get. The error is: "slapt-get: error while loading shared libraries: libsas.so.2: cannot open shared object file: No such file or directory".
I've booted the Slackware disk # 1 and unchecked everything except the libraries category and installed them. I rebooted and it still says this. I get this same error before I put the disk in and rebooted to install ALL libraries. I really need help. BTW, I can't load KDE.I found a pkg manager already installed called "slackpkg". But I really need help on this library issue!! I uninstalled it (slapt-get) anyway, so forget that!
I've been getting this error when trying to upgrade packages with slapt-get:
Failed to download: Incomplete download
Not sure what's going on. I tried to use --clean and tried to use a different mirror, but still getting the error.
I recently installed a software package that needs a command called 'daemon' to be able to start up. Slackware doesn't seem to have this command and I'm unable to find it. Where can I get it and what exactly is it that it does?
View 5 Replies View RelatedI did a upgrade from 13.1 to 13.37 both 64 bit.Then I had the urge to checkout KDE 4.6.2 Now there the wheels came off :I get this message trying to start system settings.System Settings was unable to find any views, and hence has nothing to display.Anyway its my fault had a wrong version in the directory I installed from.
View 1 Replies View RelatedI have an install of slack64 13.37. I am unable to find grub in the repo via slackpkg search grub. It doesn't seem to be in the release package list either. Ditto the extra and testing repo. Has it been removed?
View 4 Replies View RelatedI just installed Fedora 13 today, everything is working including the internet. However, when I try to get more programs it says that it cannot find the sources, and a cache reload will fix it. I wasn't sure at first what that ment, being a begginer, but I think it means going into system-refresh package lists. So I do that,ut it still wont give me the program list. I'm really confused, I come from using windows computers and I don't know what to do now, me be a little clearer, when I click on one of the catagores to find software, nothing comes up but the defalt packages that come with the system. I go into the system-Software menu, and there are no boxes cheked. I thought that this maybe to problem, so I try to cheak the top box labled without parentheses "Fedora 13 - 1386". It tells me to authenticate my action and tells me to type the root password, I do this. Then it shows the screen below. I'm running a 32 bit system,
View 1 Replies View RelatedI've been having some problems with updating recently. Whether I update using Synaptic, or apt-get, it hangs at the end, and gives various messages as at the bottom of the below apt-get update:
Ign cdrom://[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53] lenny Release.gpg
Ign cdrom://[Debian GNU/Linux 5.0.4 _Lenny_ - Official i386 CD Binary-1 20100131-18:53]
[code]...
What's the best way to use src2pkg to build sources checked out from svn?
Src2pkg expects a source tarball. But when you check out or export a program's code from svn you don't get a tarball. You just get a source directory.
Do I tar and gzip the directory? Or is there a way to skip that step?
I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
I want to compile a kernel to add a few options that are not enabled in the huge-smp-2.6.29.6 that comes with slackware. specifically, i want to add TASK_DELAY_ACCT and TASK_IO_ACCOUNTING so that I can use iotop. I just want to add those 2 options to the new kernel, everything else I'd like to keep the way it is as the system has been running just fine. Will running 'make menuconfig' in /usr/src/linux default to the options that are used in the stock kernel?
View 3 Replies View RelatedI started using Ubuntu about 2 months ago, and having been studying every day since. About 2 days ago, I downloaded a copy of i386 Squeeze, and installed it onto an old extra machine (Dell 2350 tower, 768 MB RAM, 30 GB HD, Ethernet broadband) as a learning project.
During the install, I chose to not specify an online mirror. (I was trying to keep things as simple as possible, and save time while I was at it.) I didn't realize that by not specifying a mirror, the new system wouldn't have any links for finding new software. (In Ubuntu, it was automated and required no input &/or editing from me.) Reading posts at this forum, I learned that I need to edit the sources.list file. This was my first attempt at editing a Linux system script file, and I wasn't able to manage doing that. I chose to open it using gedit, and found I couldn't change its contents. I figured out then, that it was read-only.
I have installed and configured Slackware 13.1 and it works perfectly. Now I'm going (actually forced) to downgrade kernel version down to 2.6.32. Is there any caveats? Do I need rebuild any other packages from sources?
View 13 Replies View Relatedtrying to install gnucash 2.2.9 from SlackBuilds. I have the current versions of slib and guile installed (slib from slackbuilds and guile from slackware). when installing slib I get the following:
Executing install script for slib-3b2-i486-2_SBo.tgz.
ERROR: In procedure primitive-load-path:
ERROR: Unable to find file "slib/guile.init" in load path
Package slib-3b2-i486-2_SBo.tgz installed.
Slib is installed. Try to run gnucash and I get the following: gnc.bin-Message: main: binreloc relocation support was disabled at configure time.
ERROR: In procedure primitive-load-path: ERROR: Unable to find file "slib/guile.init" in load path guile.init is in usr/lib/slib as it should be. I'm lost - where should I look next?
I'm using Slackware 13.0 on rather old PC with old Riva TNT2 video card. Default driver is "nv". Everything work fine, but without hardware 2D acceleration under X.
After studying various manuals I
1. downloaded Nvidia binary package suitable for my video card.
2. Recompile kernel without Riva framebuffer support.
3. Start Nvidia script.
Script said: "Error: unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured...""
Kernel sources are in /usr/src/linux-2.6.29.6 I have all kernel packages installed. I was trying various switches for script in order to show the right path - nothing! 8 Some people say that Nvidia script don't like 4th digit in a kernel's name and get it from "uname -r" output. Can I change it somehow?
I am unable to get KDE4 running properly, after updating my sources list to this
[code]...
I figured it was a problem with my nvidia drivers not being installed. This is what I did to install my nvidia drivers.
[code]...
I've got the following problem: I just noticed that there were just very few notifications about updating the system (usually there are damn many of them in a week) So I opened the update manager and clicked on "refresh list". The following result popped up: p,li{white-space:pre-wrap;}E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found First I thought, it would be just some kind of server problem, but it didn't stop. The next thing was to research the thread and I even found something. However, the solution suggested didn't work at all. (Things, which might have caused this: I installed the default software center |I'm using Kubuntu, but in this case that fact doesn't matter| and used it. To sum up:
- not able to update the system referring to the launchpad main sources for 11.04
- following error: E: Error http://ppa.launchpad.net natty/main/Sources Sources 404 Not Found It would be great if this was a common issue and I've been simply too stupid to find a proper solution. So you could just post the link.
I am running Jolicloud on my netbook (which I believe is an Ubuntu derivative) and I am tried to enter the getdeb.net sources in so I can install apps from the website through APT but
1) When I entered the sources into sources.list and then the key into Terminal and then went to the site and tried to install an app it didn't work.
2) I deleted the line of code in the sources.list file and when I opened terminal and entered "sudo apt-get update" it showed the list of sources, but on the list were Getdeb.net sources.
My question is how do I delete sources that aren't in /etc/apt/sources.list ?
i want to know how can i install slapt-get on slackware12
View 1 Replies View RelatedI have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,