Hardware :: Installing NVidia GeForce 2 MX 400 - ERROR: Unable To Determine The Version Of The Kernel Sources
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source
View 13 Replies
ADVERTISEMENT
Dec 15, 2008
The rest of the message is " located in /lib/modules/2.6.24-16-server/build". The version is Ubuntu server 8.04. Why can't it, and how can I help it along?
View 9 Replies
View Related
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,
View 9 Replies
View Related
Dec 5, 2009
I have a Compaq Presario 8000 with an Nvidia Geforce FX 5950 Ultra on which a year ago I upgraded from Fedora 6 to Fedora 9, and this broke the Nvidia driver, since Fedora 9 was shipped with an X server incompatible with Nvidia. I went back to the 2d driver to get X working, and it sat that way for the past year. But recently I wanted to do some 3D work and decided to install Fedora 12, which hopefully has an X server that works with Nvidia.
I decided to do a cold install, re-partitioning my 80G hard drive at the same time. I backed up my data, ran the install CDs with no errors, and booted the system, with an immediate kernel panic: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Doing a Google search, I found over 8,000 hits for that message combined with the keyword Fedora. Several of the hits were on Bugzilla: [URL] I then booted the install disk, chose rescue mode and did - chroot /mnt/sysimage
[Code]....
View 7 Replies
View Related
Jan 11, 2011
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
View 9 Replies
View Related
Feb 22, 2010
host: CentOS 5.4
guest: FC12
Virtual Machine: Virtual Box 3.1.4
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried:
# KERN_DIR=/usr/src/kernels
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686
# KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
[Code]...
View 7 Replies
View Related
Aug 9, 2011
i wanna learn so much of it as much as I do in Windows System. I have downloaded the video driver but when I installed it in Terminal some error occured after i press the enter key..
You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL].. is someone know how to solve this issue?
View 2 Replies
View Related
May 2, 2011
I am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
Code:
/etc/bin/nvidia-xconfig
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
Code:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
View 9 Replies
View Related
Apr 20, 2011
How do I determine which nVidia kernel to use with my system? I'm running a GeForce9800GT
View 11 Replies
View Related
Aug 20, 2009
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies
View Related
May 24, 2010
I just installed a fresh copy of unbuntu 10.04 and downloaded the lastest drivers for my video card but when double click the file, i get a message that says "could not open file/home/desktop name/download/n...nux-86-96.43.16-pkg1.run."Anyone know why this is happening? A friend told me to try to run them in terminal so when i opened the drivers with terminal I get a message saying "error: nvida-installer must be run as root"
View 9 Replies
View Related
Jan 18, 2011
Built a custom pc using a Gigabyte mobo and amd processor. Mobo has onboard video. Ubuntu Maverick installs fine using on board video but when I put in the Nvidia Geforce GT 240 I get either no video or scrambled video. I've tried disabling the on board video and still no luck. I've also tried to install nvidia drivers first, and will get it to work but video is not crisp and will not show all of the screen.
View 4 Replies
View Related
May 16, 2010
for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).
so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:
Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:
Quote: sudo nano /etc/modprobe.d/blacklist.conf
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
[Code]...
View 5 Replies
View Related
Mar 23, 2011
I have installed and configured Slackware 13.1 and it works perfectly. Now I'm going (actually forced) to downgrade kernel version down to 2.6.32. Is there any caveats? Do I need rebuild any other packages from sources?
View 13 Replies
View Related
May 28, 2011
I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:
$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found
I was not able to install the package.
$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig
[code].......
View 9 Replies
View Related
Sep 29, 2010
In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.
Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.
View 4 Replies
View Related
Dec 10, 2009
I have finally managed to get the nvidia drivers for my dell vostro 1500 laptop
It has GeForce Nvidia 8400M GS graphics card.
I have installed them according to the guide given by Leigh123
[url]
Now that is done, i am not able to get the compiz working,i wanted to update to nvidia drivers as i wanted to get that fire and water effect, they are so cool, I came to know that it was beryl earlier but not beryl has been stopped and its compiz which has now taken over.
Fc12 comes with compiz in the live CD. System >> Preferences >> desktop effects >> check radio button compiz
The system freezes and then the bug reporting tool comes up. kindly let me know which log files to upload which may help you to determine the problem better.
View 4 Replies
View Related
Aug 3, 2010
I'm using Slackware 13.0 on rather old PC with old Riva TNT2 video card. Default driver is "nv". Everything work fine, but without hardware 2D acceleration under X.
After studying various manuals I
1. downloaded Nvidia binary package suitable for my video card.
2. Recompile kernel without Riva framebuffer support.
3. Start Nvidia script.
Script said: "Error: unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured...""
Kernel sources are in /usr/src/linux-2.6.29.6 I have all kernel packages installed. I was trying various switches for script in order to show the right path - nothing! 8 Some people say that Nvidia script don't like 4th digit in a kernel's name and get it from "uname -r" output. Can I change it somehow?
View 14 Replies
View Related
Mar 23, 2011
This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.
Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.
View 5 Replies
View Related
Feb 16, 2011
I recently upgrade from Lenny to Squeeze. My graphic card is nVidia Corporation G86 [GeForce 8400M GT] (rev a1). Using lenny latest drivers from nvidia worked fine. I installed nvidia drivers using Debian packages 195.36.31-6 and latest driver from nvidia site (260.19.36) and also other nvidia drivers. The problem is when I start gdm3 I saw nvidia logo but then when it loads gdm3 it shows gdm3 screen with lot of black pixels and other random pixels and then the screen freezes. And the only thing I can do is restart using [alt]+[sysrq]+b.
View 13 Replies
View Related
Apr 5, 2010
I am not new to Debian and used to use commands like "apt-get install <package>", "apt-get update", "apt-get upgrade" and "apt-cache search <string>" regularly. But I never understood those Debian programs and the Debian package system with it's numerous programs and way to install things and work on software and configurations. Now, I just wanted to do something that I thought to be really easy. Get the source of an existing package. And despite spending over 3 hours - including reading the man-pages of commands - I cannot find a way!
Two things:
dpkg --get-selections | grep openvz
linux-image-2.6-openvz-amd64 install
linux-image-2.6.26-2-openvz-amd64 install
I already don't understand why I have two such packages installed. I would like to download the source of my kernel: apt-get source linux-image-2.6.26-2-openvz-amd64. This downloaded linux-2.6_2.6.26-21lenny4.dsc, linux-2.6_2.6.26.orig.tar.gz and linux-2.6_2.6.26-21lenny4.diff.gz
Then, I wanted to patch this - having found no explanation, I did:
cd linux
patch < ../linux-2.6_2.6.26-21lenny4.diff
That seemed to patch the kernel. But I am not sure - there are new files like this now_
[...]
Only in linux-2.6-2.6.26: xenctrl-capabilities.patch
Only in linux-2.6-2.6.26: xenctrl.patch
Only in linux-2.6-2.6.26: xenctrl-privcmd.patch
[...]
So, how can download the complete Debian kernel source? And what do I need to be able to compile it? And - HOW to just list all available sources and search in them?!? I found lots of webpages where tools like "make-kpkg" are used, which I do not understand again. Under SuSE, I could just select the package from a list, say "make oldconfig install modules modules_install" and be ready. Under Debian, I just find no way ...
View 14 Replies
View Related
May 10, 2010
Is there any way to install a kernel using rpms and avoid compiling its sources? I am using OpenSUSE 11.2.
View 7 Replies
View Related
Apr 8, 2011
I am trying to compile a patch for HDMI audio, reference this thread [URL]
Code:
Instructions:
- download alsa-driver-1.0.21 from alsa homepage
- unpack downloaded alsa:
$ tar jxvf alsa-driver-1.0.21.tar.bz2
- download and apply my patch
$ wget http: [URL]
$ cd alsa-driver-1.0.21
$ patch -p 1 < ../alsa-driver-1.0.21-nvidia-ion2-hdmi.patch
- compile alsa
$ ./configure
$ make
$ make install
when I do ./configure it outputs this
Code:
The file /lib/modules/2.6.33.7-pclos6.bfs/source/include/linux/autoconf.h does not exist. Please install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.33.7-pclos6.bfs/source). How can I direct it to install with the 'full kernel sources' ?
View 8 Replies
View Related
Mar 15, 2010
So I've searched across these forums and haven't quite found the same problem I'm having. For the record, I'm running Ubuntu 9.10 So I built my new box, and my video card is a Gigabyte Nvidia GeForce 9600GT (GIGABYTE GV-N96TZL-1GI). I go to System > Administration > Hardware Drivers to install the drivers so I can use those fancy 3D effects. It tells me I need to restart, so I do.
When it comes up though, I get an error message about running in low graphics mode, the top 5th of my screen is blacked out, and the screen has been shifted so that the left boundary is in the middle, and the right boundary goes off the screen and back to the left side. It goes back to working fine (but without the fancy 3D effects) when I remove the drivers. Both drivers in the hardware drivers (185 and 173) have this problem. I'd post log files and such, but I'm at work right now.
View 14 Replies
View Related
Dec 28, 2009
How can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.2
Deleting module version: 3.1.2
completely from the DKMS tree.
Done.
Creating symlink /var/lib/dkms/vboxdrv/3.1.2/source ->
/usr/src/vboxdrv-3.1.2
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at
/lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source.
You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without:
Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
Code:
[root@nevada Downloads]# uname -r
2.6.31.6-166.fc12.x86_64
View 8 Replies
View Related
Jul 22, 2010
I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".
View 3 Replies
View Related
Jan 30, 2011
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
View 7 Replies
View Related
Mar 15, 2011
installing nvidia driver . i'm useing gnome desk top.
View 9 Replies
View Related
Mar 7, 2011
I have created a custom debian netinst USB stick. It has the default UK repositories in the sources list, but people in the US also need to use the stick from time-to-time.
Would it be a bad idea to mix US and UK repositories in the sources.list? Would Debian be clever enough to pick up the best repo depending on where the user is using the OS from? Or would I need to be a bit clever and create some sort of script to deal with this. (I am avoiding non-free/experimental software).
View 2 Replies
View Related
Aug 8, 2011
I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
View 9 Replies
View Related
