OpenSUSE Install :: Installing Kernel Through RPMs Without Compiling Sources?
May 10, 2010Is there any way to install a kernel using rpms and avoid compiling its sources? I am using OpenSUSE 11.2.
View 7 Replies
ADVERTISEMENT
Software :: Compiling Patch - Installing With Full Kernel Sources?
Apr 8, 2011I am trying to compile a patch for HDMI audio, reference this thread [URL]
Code:
Instructions:
- download alsa-driver-1.0.21 from alsa homepage
- unpack downloaded alsa:
$ tar jxvf alsa-driver-1.0.21.tar.bz2
- download and apply my patch
$ wget http: [URL]
$ cd alsa-driver-1.0.21
$ patch -p 1 < ../alsa-driver-1.0.21-nvidia-ion2-hdmi.patch
- compile alsa
$ ./configure
$ make
$ make install
when I do ./configure it outputs this
Code:
The file /lib/modules/2.6.33.7-pclos6.bfs/source/include/linux/autoconf.h does not exist. Please install the package with full kernel sources for your distribution or use --with-kernel=dir option to specify another directory with kernel sources (default is /lib/modules/2.6.33.7-pclos6.bfs/source). How can I direct it to install with the 'full kernel sources' ?
General :: Compiling Kernel Sources Or Its Modules
Oct 25, 2010It has been years since I have need to compile the kernel or its modules. Here goes: I recently upgraded to ubuntu 10.10 and needed the kernel source and its modules source. The relevant directories are in a mess. Several diff versions, broken links, the works. Is there a nice easy way, to remove all of the sources, there, and err "install" the ones for my latest kernel, in the correct places. Then I might have a chance at getting the two modules I need complied! Nvidia being one for the geforce 4 mx420 nv17
View 4 Replies View RelatedGeneral :: No Kernel Sources When Compiling Software
Feb 25, 2010When compiling software I get the following notice : You do not appear to have the sources for the 2.6.31.5xls-domU kernel installed.
Yum says :
Package kernel-headers-2.6.18-164.11.1.el5.x86_64 already installed and latest version
Package kernel-devel-2.6.18-164.11.1.el5.x86_64 already installed and latest version
But uname says :
Code:
-bash-3.2# ls /usr/src/kernels/
2.6.18-164.11.1.el5-x86_64
-bash-3.2# uname -a
Linux vds.hosting.net 2.6.31.5xls-domU #4 SMP Fri Dec 4 12:17:04 CET 2009 x86_64 x86_64 x86_64 GNU/Linux
Extra info :
title CentOS (2.6.18-164.11.1.el5xen)
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-164.11.1.el5xen ro root=/dev/xvda1 console=xvc0
initrd /boot/initrd-2.6.18-164.11.1.el5xen.img
This is a VDS I'm renting from my Hosting company. How can I get the right sources? RPMforge repo?
Slackware :: Compiling Kernel Sources To Add Few Options
Apr 18, 2010I want to compile a kernel to add a few options that are not enabled in the huge-smp-2.6.29.6 that comes with slackware. specifically, i want to add TASK_DELAY_ACCT and TASK_IO_ACCOUNTING so that I can use iotop. I just want to add those 2 options to the new kernel, everything else I'd like to keep the way it is as the system has been running just fine. Will running 'make menuconfig' in /usr/src/linux default to the options that are used in the stock kernel?
View 3 Replies View RelatedOpenSUSE :: Compiling XEN 4.0 From The Sources In 11.2.
Jun 9, 2010I'm trying to build the latest XEN 4.0.0 from the tarball in xen.org.
After resolve the dependencies, I finalled compiled the xen kernel.
But the problem, it is not making the intrd for booting (and it is not suposed to do ), it just comments the following on the README source:
Depending on your config, you may need to use 'mkinitrd' to create an initial ram disk, just like a native system e.g.
# depmod 2.6.18-xen
# mkinitrd -v -f --with=aacraid --with=sd_mod --with=scsi_mod initrd-2.6.18-xen.img 2.6.18-xen
[Code].......
I really want to test the pastrough and snapshot new features in XEN, since i really start to hate vmware eating all resources with more than 1 vm (I know, there is VirtualBox, but I used Vmware first since you can record videos and for portability).
I already used XEN 3.4 a lot in my own labs inside my laptop, (since I learned how to use virtual network in nat mode), and since is the default hypervisor on the job (we are migrating the lasts Vmware vms !!! cool!!! ) and I really really love XEN (is amazing, 4 vms, 1 host in a laptop turion 64 x2 with just 3GB ram!!! and my processor is not flaming!!!).
OpenSUSE Install :: Broken System After Install Of Kernel Sources And Restart?
May 29, 2011I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
OpenSUSE Install :: Installing Gcc 4.1.1 - Error: Can Not Find Sources In . Or .."
Aug 8, 2011I am trying to install gcc4.1.1 upon my opensuse machine which already has gcc 4.5 installed but I want an earlier version.
1) I downloaded gcc-4.1.1.tar.bz2
2) Extracted the contents
3) When I tried to run the command "./configure" on terminal its giving error "configure: error: can not find sources in . or ..". However I can see the configure file in the directory. Below are the files present in directory.
[Code]....
OpenSUSE Install :: Compiling Modules Against Kernel?
Feb 26, 2010I am having some issues compiling kernel modules against the pre-built OpenSUSE kernel. Whenever I compile a module and try to load it, I get something like:
Code:
insmod fs/smbfs/smbfs.ko
insmod: error inserting 'fs/smbfs/smbfs.ko': -1 Invalid module format
It doesn't actually matter what the module is, they all do the same thing. I have tried the above mentioned smbfs, I've also tried:vmware kernel module
[Code]...
OpenSUSE Hardware :: Compiling Kernel-source For NVidia Driver Install
Jun 18, 2011In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
Debian :: Installing Kernel Sources - Compile And List
Apr 5, 2010I am not new to Debian and used to use commands like "apt-get install <package>", "apt-get update", "apt-get upgrade" and "apt-cache search <string>" regularly. But I never understood those Debian programs and the Debian package system with it's numerous programs and way to install things and work on software and configurations. Now, I just wanted to do something that I thought to be really easy. Get the source of an existing package. And despite spending over 3 hours - including reading the man-pages of commands - I cannot find a way!
Two things:
dpkg --get-selections | grep openvz
linux-image-2.6-openvz-amd64 install
linux-image-2.6.26-2-openvz-amd64 install
I already don't understand why I have two such packages installed. I would like to download the source of my kernel: apt-get source linux-image-2.6.26-2-openvz-amd64. This downloaded linux-2.6_2.6.26-21lenny4.dsc, linux-2.6_2.6.26.orig.tar.gz and linux-2.6_2.6.26-21lenny4.diff.gz
Then, I wanted to patch this - having found no explanation, I did:
cd linux
patch < ../linux-2.6_2.6.26-21lenny4.diff
That seemed to patch the kernel. But I am not sure - there are new files like this now_
[...]
Only in linux-2.6-2.6.26: xenctrl-capabilities.patch
Only in linux-2.6-2.6.26: xenctrl.patch
Only in linux-2.6-2.6.26: xenctrl-privcmd.patch
[...]
So, how can download the complete Debian kernel source? And what do I need to be able to compile it? And - HOW to just list all available sources and search in them?!? I found lots of webpages where tools like "make-kpkg" are used, which I do not understand again. Under SuSE, I could just select the package from a list, say "make oldconfig install modules modules_install" and be ready. Under Debian, I just find no way ...
OpenSUSE :: Installing RPMs Elsewhere - Package Not Relocatable
Jul 19, 2010I can use KRPMview or midnight commander to see what's in an RPM, fine. I might want to inspect a file inside an RPM or actually install some of its files but this latter might upset already installed files. Or, it is so dependent on something else being previously installed. Therefore I need to install it elsewhere, take a look at he file content and/or copy, it to where I want.
There are options: --badreloc --prefix --relocate --nodeps --ignoreos --force
Some are mutually exclusive but the result is it still tells me - package not relocatable. Is there any other magic incantation or do I need to do some time-consuming backup, run the RPM install and any deps hell, do my intended thing, then another time-consuming restore? Or maybe set up a partition with a suitable suse version and just run the RPM there and then copy over?
Debian :: Compiling And Installing A New Kernel?
May 29, 2011i downloaded the latest stable release of the linux kernel 2.6.39 and i did the following ran the command
Code:
make xconfig
and there were no errors so far so good
then i ran
Code:
make in the mix of all the command line and characters one of the lines said
Code:
stack protector enabled but no compiler support because of this the rest of the installation process is not going well i am unable to install the new linux kernel successfully. the kernel shows up on the grub boot menu but goes into a kernel panic when i try to boot it. how do i compile the new kernel in debian squeeze
General :: Cannot Boot After Compiling And Installing Kernel
Apr 14, 2010I have a virtual box running CentOS 5.3. I am experimenting with compiling and installing a kernel 2.6.33 on this.
However, the kernel compiled ok, but when I did the install it gave me these warning, not sure if they are important or not.
The steps I did was:
Code:
Code:
In my grub.conf I have the following:
Code:
When I try and boot I get the following problem:
Code:
Debian :: Installing Kernel Sources - Make Command To Build Package Fails
Jul 22, 2010I'm trying to build the package zaptel on debian, but I'm encountering two errors:
1- When I try to run the "make menuselect" command, I get an error stating that I need ncurses which is missing. I tried to get it installed but didn't get to do it yet.
2- After that, there's the command "make" I think it's to build the package. Yet again this fails, and the error I get is "you do not appear to have the sources for the 2.6.26-2-686 kernel installed".
General :: How Much Size Should Give When Compiling And Installing A Kernel
Apr 13, 2010I have downloaded the newest most stable Linux kernel, 2.6.33.2.
I thought I would test this using VirtualBox. So I create a dynamically sized harddisk of 4 GB. And installed CentOS 5.3 with just the minimum packages.
I setup the make menuconfig with just the default settings.
After that I ran make and got the following error:
The amount of space I have left is:
My virtual size is 4 GB, but the actual size is 3.5 GB.
How much size should I give when compiling and installing a Linux kernel? Are there any guidelines to follow when doing this? This is my first time, so just experimenting with this.
General :: Compiling And Installing Kernel Into User's Own Folder
Mar 24, 2010I am compiling kernel to learn it and as well as for edubook, a netbook I am working on. I wanted to put the compilation under my home directory and followed the syntax suggested in the README in /usr/src/linux,like,
Quote:
'make o=/home/pbhat/temp/kcompile menuconfig'
Like this I have gone through full compilation successfully,but see no output going to the specified folder.Could anybody point out where I went wrong? I was compiling under /usr/src/linux and in Opensuse 11.2.I followed the README apparently written by Linus where I saw the above make syntax.Maybe that is old and hold good no more.
Hardware :: Installing NVidia GeForce 2 MX 400 - ERROR: Unable To Determine The Version Of The Kernel Sources
Jan 11, 2011I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source
OpenSUSE :: Install All Of The RPMs In The RPM Directory?
Sep 28, 2010Anyone have any luck installing libre office?
I downloaded it, is the intent that you just install all of the RPMs in the RPM directory? There isn't too much documentation yet.
OpenSUSE :: VMWare Installation - Of Gcc And Kernel-sources Versions
Dec 30, 2010Trying to install VMWare I get the following message:
Really after it VMWare anyway doesn't agree to install. Zypper says that no newer version of gcc is available. So I can't see how I can install VMWare.
OpenSUSE :: YaST2 Failing To Install RPMs?
Oct 6, 2010I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.
View 9 Replies View RelatedOpenSUSE Install :: Finding And Installing Latest Kernel
Dec 11, 2009What is the most efficient way to install the different kernels, in particular the latest?
View 1 Replies View RelatedOpenSUSE Install :: Boot Failed After Installing New Kernel Initrd-2.6.34.7-0.2-desktop
Sep 21, 2010Suddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
OpenSUSE :: Error While Compiling / Installing Software
Jun 25, 2010I am trying to install a software but I get error as under -
[Code]...
Debian :: Compiling Kernel - 2.6.26 Version Of Kernel Doesn't Longer Exist In Kernel.org Website
Sep 16, 2010i'm using this guide videos - howto: debian linux kernel compilation, part 1 and the author says i need kernel 2.6.26 this version of kernel doesnt longer exist in kernel.org website and the only 2.6.26 i found is a patch here. should i use the patch? or download another version of kernel?
View 2 Replies View RelatedSoftware :: Nvidia Driver Install Script - Unable To Determine The Version Of The Kernel Sources
Dec 15, 2008The rest of the message is " located in /lib/modules/2.6.24-16-server/build". The version is Ubuntu server 8.04. Why can't it, and how can I help it along?
View 9 Replies View RelatedRed Hat / Fedora :: Compiling And Installing The Custom Kernel Under Fedora
Jun 22, 2011I am compiling and installing the custom kernel based on the instructions provided in Building_a_custom_kernel on fedoraproject.org/wiki site.
However, according to the instructions, anytime I change anything in the kernel source files(e.g /driver/ata/libata-core.c), I have to create a patch a rebuild the whole kernel and install this new kernel which takes 2 hours. Is there a simpler way of recompiling what has changed(without creating patch) and try that changed kernel? Since my changes are not in the drivers which can be dynamically loaded but is in the static code of the kernel, it is making life cumbersome.Are there any instructions for this? How does other kernel developers manage this?
Debian :: Compiling Sources - Configure Shows Prog Missing
Apr 28, 2010I have this problem constantly and it tells me to install such and so a prog, but I do locate [prog] and it shows up in 80 places so it's obviously installed. I just have no clue how to attach the two or to set up anything in the ./config set up so it leaves me completely stuck. So what's the trick when it's already in there? Also..it says I just joined? in 2008.
View 5 Replies View RelatedOpenSUSE Hardware :: Installing (compiling) Wireless Card Drivers Asus PCE-N13?
Jul 6, 2010I have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
[Code]...
General :: Finding Rpms For Red Hat 8 Kernel Ver. 2.4.18-14?
Feb 24, 2010I need to set up auditing on an old RHL 8.0 server running kernel version 2.4.18-14 but I can't seem to find an archive with the rpm for that version of Red Hat.
View 1 Replies View Related