OpenSUSE Install :: Cannot Boot From LiveUSB
Apr 15, 2010
I have a memory stick of 8GB and I partition it like that: The first partition is a big one approx 7GB for file transfers and stuff like that - is a FAT32 file system On the second partition I made a opneSUSE 11.2 Live USB with the following command:
dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync
After that I plugged the usb in other computer to boot from USB but the system is freezing on a black screen.
I used the first partition for file transfer because Windows seems to see only the first one.
View 3 Replies
ADVERTISEMENT
Nov 26, 2010
I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.
I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.
When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.
When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...
I have also tried installing using the NET iso however I have exactly the same outcome.
This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.
View 3 Replies
View Related
Nov 30, 2009
I want to install OpenSUSE 11.2 on my Acer TimeLine 3810TZ which has no DVD Drive and it reports that it's written it A-OK.So I go to my laptop, enter the BIOS to give priority boot to the USB (It has Three USB entries, USB-CDROM, USB-HDD, USB-FDD, so I just put them all before any HDDs, figuring it'd cycle through them) and reboot with my stick in one of the USB slots.
And then it hangs on the BIOS. It lights up my USB Stick's activity light like crazy, but it never actually leaves the BIOS screen (POST screen). Any idea what's going on? I'm kind of stuck with Windows Vista, and we all know how bad that is
View 9 Replies
View Related
Jun 9, 2009
I booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
View 3 Replies
View Related
Apr 29, 2011
Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.
View 4 Replies
View Related
Jul 16, 2011
I am quite new to Linux, so bear with me if I ask silly questions. For homework (and fun) purposes I needed to create a bootable USB of Fedora12. Which I did, successfully I might add However, when I rebooted the computer, I got this puzzling error message code...
What have I done wrong here?
View 5 Replies
View Related
Nov 8, 2010
I downloaded Ubuntu desktop 10.10 on to my Acer 5741 laptop (which I checked online for comptability), following the site's instructions to the letter. I used the USB installer to create a live USB which seemed to go fine. I then restarted as instructed and changed the USB to be selected to boot. However, from that point, the OS fails to load. I get several pages of code loading, then a screen with a logo at the bottom, then my screen just goes dark.
I've been using Windows 7 to download etc.
View 9 Replies
View Related
Feb 20, 2010
im not very educated in amd processors, but i think that they are all 64-bit processors.
i downloaded the amd ubuntu 9.10 into my computer, and used the usb maker utility in the system menu. i put in in my new pc (it was given to me), and i tell it to boot into the usb.
then i get this. i am posting a pic.
sorry about the sideways pic. i took it with my phone.
anyway, i get the syslinux boot shell script thingy. i have tried lots of things. linux, vmlinuz, lots of other things i found online. so what im wondering is the exact name of the kernel in ubuntu 9.10 amd version.
View 4 Replies
View Related
Nov 20, 2009
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
View 5 Replies
View Related
Jun 14, 2011
I'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:
Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely
[code]...
View 1 Replies
View Related
Aug 5, 2010
I created a live usb and I am trying to boot linux, but after it starts a large written ubuntu screen when starting appears i.e its boot screen but it do not start and continues as if it is still loading.
View 8 Replies
View Related
Mar 30, 2011
I experienced what i perceive as the craziest thing during 2 years of using ubuntu. About some months ago, I have two ubuntu installed on my HP-mini netbook: ubuntu 10.04 64 bit (CAElinux) and kubuntu 10.04, and run without problem.
One day, the netbook's battery run out of charge and I forgot to plug it in. The ubuntu, as usual, went to hibernate, but without harddisk noise, so I forced it to shutdown by pressing power button (as i think it is not normal). What happened later was the partition of 10.04 was broken, it could not boot, it even affected another partition as the netbook couldn't boot kubuntu 10.04.
I try to run liveUSB and CD of both distro and the liveCD/USB boot stopped on loading screen. So I try another linux distro: PCLinuxOS, which was able to boot but took very long time. The partition of ubuntu 10.04 could not be accessed.
After installing PClinuxOS in replace of kubuntu, I scanned the ubuntu 10.04 partition and the partition was fixed, I could access the partition and could load to ubuntu 10.04, but it took very long time. Here how it loaded: first: blank screen with blinking cursor, then ubuntu load screen, then back to blank screen with blinking cursor, then it showed numbers and sentences, like some scanning works. It took long time before login screen appeared (about 10-15 minute, while the prevously normal boot time in my netbook was less than 1 minute), but once its done, the ubuntu worked normally. This also the case in the PClinuxOS and the reason it load very slowly.
After this, I try to boot the liveUSB of various linux distro, and found some could boot while the others not:
Able to load with unusual slow boot time:
PClinuxOS (latest)
Ubuntu 8.04
Fedora (latest)
Linuxmint 8 (based on ubuntu 9)
Can't load
ubuntu 10.04 and 10.10
kubuntu 10.04
latest linuxmint
The liveUSB boot could take 1 hour. I also try the latest Puppy, Gentoo and OpenSuse liveUSB but it couldn't boot, and it likely the liveUSB problem. I made the all the liveUSB with unetbootin. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint could not boot even after I scanned the ubuntu 10.04 partition. There was no problem with the liveUSB as it would load normally on another computer. I think it is just the variant of ubuntu 10 that is not being able to boot.
I was not content on this slow boot, so I try to format the two partition of ubuntu and PClinuxOS (there are another partitions though), and installed ubuntu 8. But it also happened to boot slowly as the previous ubuntu. Then I replaced it with linuxmint 8, and the same occurred. So I try to install windows on another partition, and it boot normally.
The question is, what is happening. Why do the forced-shutdown-of-ubuntu-10.04 affect another partition, to the boot of another distro? If my HD was broken, the Windows would load very slowly too right? Yes, in SMART Data (from disk utility) it showed "few bad sector", but i think this is not related to the slow boot. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint cannot boot until this moment. I am thinking there are some informations planted on my computer, that twist it to load some distro slowly, and prevent it to load some others. But where and what? (I almost arrived to the thought that this is supernatural!)
Because of my long story up there (as I think it must be reported), the conclusion is:
1. Ubuntu 10.04 on my netbook was forced shutdown (by me)
2. It caused the partition broken
3. After fixing the partition (by scan, but I forgot the command), it took very long time to boot, but the ubuntu itself run normally
4. It also affected the boot of another distro (slow down the boot time), but Ms.Windows boot time is normal
5. It also caused ubuntu 10 (and its variant) to not be able to boot from liveCD/USB
6. It also caused me going crazy
Now im gonna format the whole HD in hope of ubuntu 10.04 (and later) could boot again, but shall it fix the problem? (as formatting the previously ubuntu 10.04 partition did not solve the problem). Or should I buy another HD (or even computer) to install natty!
View 9 Replies
View Related
Feb 10, 2010
I've created the GParted LiveUSB from what I found on the Ubuntu forum. Apparently the instructions given on GParted website doesn't work.
I essentially copied the necessary gparted files to my USB and then made it bootable using syslinux.
I've set the boot sequence properly to boot from my USB but it still doesn't do anything and just brings up the screen where I select my OSs (I have a dual-boot system with WinXP).
I don't have access to a CD-drive so will have to use the USB. Is there a different way to make the LiveUSB?
View 1 Replies
View Related
Oct 31, 2010
not a ubuntu issue, and I tried it with UNEBOOTIN both on win7 and ubuntu... I can't make a bootable liveUSB with those. It either has a blank screen when booting through USB or it says some error occured... Any other known way to make one? I do not have an optic drive.
View 1 Replies
View Related
Jun 4, 2011
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
View 3 Replies
View Related
Jan 6, 2010
I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .
View 1 Replies
View Related
Jun 5, 2010
I made a quick little USB install of Ubuntu using the USB Creator thing in Ubuntu 9.10 (I gave it room to store data also). I use this USB on two computers (Both Toshiba Laptops) and one of them needs restricted drivers for 3D. If I install them, will it mess up where it won't work on any other computers?
View 3 Replies
View Related
Oct 5, 2010
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
View 5 Replies
View Related
Sep 30, 2010
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
View 5 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Jan 4, 2010
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
View 4 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
Sep 29, 2010
I have a Dell laptop with Windows XP installed, and for various reasons (Help: I borked my WindowsXP boot when installing OpenSUSE 11.3) I can not install a GRUB boot loader to the first hard drive (hd0).
I currently have a second hard drive in this laptop with a perfectly working OpenSUSE 11.3 instance, but no way to boot into it. I remember back in ancient times, a common option with Linux distros was to create a boot floppy to boot into Linux rather than installing GRUB or LILO to MBR. Since this laptop doesn't have a floppy drive I'd like to do the same thing with a USB stick. Is there any way to install GRUB (or something similar) to a USB stick? What I am not asking here is whether I can put a full, bootable Linux instance on a USB drive - I only want a boot loader on USB that launches to the appropriate mount point on (hd1).
View 6 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Jun 24, 2010
I'm new to OpenSuse and also fairly new to Linux in general. I installed OpenSuse 11.2 on a secondary machine and I really like it. However, during booting it stops somewhere half way, giving me only a black page but with a functioning cursor arrow. I can't do anything with it though. I re-booted in recovery mood and managed to boot up as root using the command 'startx'. How can I get back to "my own" log-in from here, with my own settings etc? There's obviously something missing during boot-up but where do I look?
View 5 Replies
View Related
Aug 5, 2010
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
