Fedora Installation :: LiveUSB No Graphics - No Install
Jun 4, 2011
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
View 3 Replies
ADVERTISEMENT
Jun 9, 2009
I booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
View 3 Replies
View Related
Jan 6, 2010
I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .
View 1 Replies
View Related
Nov 3, 2010
I have a 4GB USB Flash Drive that I would like to install Fedora 14 Live on.
Process:
Downloaded the Fedora 14 i686 Live ISO file Used the Fedora LiveUSB Creator on my USB with the Fedora 14 ISO
I changed my BIOS on my Dell Inspiron E1505 to boot from a USB, then CD-DVD ROM, then Internal HDD Had USB inserted, then turned on computer.
Received the following message:
And then it sticks. I've found two other internet sites that have had this problem. One is in chinese, the other is in french. I know french, but the 'solution' was not clear.
View 14 Replies
View Related
Aug 20, 2010
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
Here is the message i get:
View 10 Replies
View Related
Aug 30, 2011
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies
View Related
Oct 5, 2010
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
View 5 Replies
View Related
Mar 23, 2009
I have the following trouble when I try to install Fedora 10 with a USB Flash Drive created by Fedora LiveUSB 3.6.3 [url]...ator-3.6.3.zip in a HP Mini-Note 2133 Notebook.
Everything looked ok during install, restarted the PC, get the booting count down and splash screen.
After some seconds then get this:
View 1 Replies
View Related
Nov 20, 2009
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
View 5 Replies
View Related
Jun 14, 2011
I'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:
Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely
[code]...
View 1 Replies
View Related
Oct 13, 2009
System Specs:
Toshiba A135-S2276 Laptop With Vista
ATI RADEON 200M 128MB
1.78Ghx Core Duo
2GB RAM
I am trying to Install Fedora 11 from a live install CD. I know it works because I tried it on another system. After the little Balloon that shows its loading completes the screen scrambles, later a mouse pointer appears then freezes shortly after. When I remove Quiet from Kernel Params. Lots of text then Samething.. Scrambled Screen the Freeze. I have tried adding the Following Parameters to the Kernel (nomodeset, xdriver=vesa, acpi=noirq, noapic). This sounds like a common problem with ATI based graphics and all answers seem to point the "nomodeset" and the "xdriver=vesa" but they dont seem to help.
View 4 Replies
View Related
Jul 20, 2009
I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.
View 1 Replies
View Related
Apr 15, 2010
I have a memory stick of 8GB and I partition it like that: The first partition is a big one approx 7GB for file transfers and stuff like that - is a FAT32 file system On the second partition I made a opneSUSE 11.2 Live USB with the following command:
dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync
After that I plugged the usb in other computer to boot from USB but the system is freezing on a black screen.
I used the first partition for file transfer because Windows seems to see only the first one.
View 3 Replies
View Related
Nov 26, 2010
I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.
I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.
When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.
When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...
I have also tried installing using the NET iso however I have exactly the same outcome.
This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.
View 3 Replies
View Related
Feb 6, 2010
I'm wondering if it's possible to write changes to a LiveUSB stick. As you probably already know ubuntu gets mounted to a ramdisk to improve performance and save your USB stick's life (I think so anyway, don't quote me on that).
I'm wondering if it's possible to write any changes made, such as changing running services and installed packages back to the USB stick without actually installing ubuntu fully onto the USB stick.
View 1 Replies
View Related
Apr 29, 2011
Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.
View 4 Replies
View Related
Sep 1, 2011
I dont really use ubuntu too much, just for my programming class. Anyways I want to have ubuntu on a USB stick so I can use it on my laptop, netbook, desktop PC at home and desktop PC in class, all of which run Windows natively.
I would prefer the Virtual Machine (VM) on a USB stick but im not sure if its possible to install virtualbox (my VM of choice) on a USB drive. if not then a liveUSB, though correct me if im wrong but would i be able to save files on a liveusb?
If I do go with the VM on the usb stick option, i need an idea what size USB stick to buy so what is the bare minimum space you can run ubuntu on? I also intend to run OpenSUSE which is why i prefer the portable vm option.
View 1 Replies
View Related
Nov 4, 2010
I've installed the XFCE iso of Fedora 14 (the 64x edition) onto a 4 gig flash drive. When I try to boot from the drive, a command-line (BIOS?) interface pops up with the following text (no prompt).
Code:
It hangs there without going any further. I'm currently downloading a different version of Fedora 14, so maybe it's just a bad install. Or maybe this is something that I should have encountered before. Any ideas on how to get it booted up?
View 6 Replies
View Related
Jun 1, 2011
I have a USB with two partitions, one FAT32 with Ubuntu 10.04 on it, and one ext4 partition labelled casper-rw. According to the docs this should do to create a persistence installation, but I still get the "can't find persistence medium" error when booting.
Did I do something wrong or is this a bug?
I installed with unetbootin on the FAT32 partition and created the partitions using GParted.
View 3 Replies
View Related
Nov 30, 2009
I want to install OpenSUSE 11.2 on my Acer TimeLine 3810TZ which has no DVD Drive and it reports that it's written it A-OK.So I go to my laptop, enter the BIOS to give priority boot to the USB (It has Three USB entries, USB-CDROM, USB-HDD, USB-FDD, so I just put them all before any HDDs, figuring it'd cycle through them) and reboot with my stick in one of the USB slots.
And then it hangs on the BIOS. It lights up my USB Stick's activity light like crazy, but it never actually leaves the BIOS screen (POST screen). Any idea what's going on? I'm kind of stuck with Windows Vista, and we all know how bad that is
View 9 Replies
View Related
Jun 5, 2010
I made a quick little USB install of Ubuntu using the USB Creator thing in Ubuntu 9.10 (I gave it room to store data also). I use this USB on two computers (Both Toshiba Laptops) and one of them needs restricted drivers for 3D. If I install them, will it mess up where it won't work on any other computers?
View 3 Replies
View Related
Nov 1, 2010
Today I installed starDict in my Fedora LiveUSB, after I reboot machine. The system backtrack the original one, and then I update the kernel, the system also backtrack.
Why LiveUSB have this function. Can you explain theory about LiveUSB.
View 2 Replies
View Related
Jul 20, 2011
Installing from minimum CD to Dell Latitude C600. So far I managed to get the network to work in rescue mode. But the graphics (X-window?) has the wrong refresh rate. Shortcut keys do not seem to change resolution. No obvious errors during boot but can't read the last few lines, they go by too fast. Not sure what to try next.
View 12 Replies
View Related
Feb 5, 2010
I think I have found a bug, (or maybe just an omission to the new version.)I have a Dell sx270 with P4 and Intel 82865G graphics on board. I cannot see the display in either Normal or Safe Graphics for any option on the 9.10 installation cd EXCEPT memory test, which does show up in Normal mode.
What I see is; When I make a selection, the screen blanks, I see a cursor in the upper left, and then my monitor tells me that it is not connected. The cd and drive happily do their respective things, I just cannot see anything on the screen.
When I return to 8.04, (running the 64 bit on my laptop!) and download the 32 bit desktop version, I get very different results; In Normal mode, the screen is visible until about 80-90% of the ubuntu progress bar is filled, the screen blanks, a curser shows in the upper left, and then my monitor says "no connection".
Try this again in Safe Graphics mode; same spot and the display tells me it is re-adjusting and 'Bob's your uncle,' installation is working fine. So, Did someone decide not to support earlier hardware, or did something get left out?
I would like an answer before I attempt to up-date the 8.04 I just installed. Nothing worse than making a graphics change that cannot be undone, and I would like to try 9.10 (on this desktop) BEFORE I update my laptop from 8.04.
View 4 Replies
View Related
Jan 7, 2010
I created a LiveUSB and that worked. On about the 3rd use I attempted to update packages - about 174 came up I think (I saw that number on another post which reminded me, hence the precision). Two or three dialogues came up, unfortunately unintelligible to me, a Ubuntu novice. Both concerned grub2. The first I just forwarded on and the update trundled on. The 2nd asked me something like whether I wanted grub to update sda or sdb. I checked neither (against the pop-up help advice). The update completed but when I eventually went to reboot from the USB I got a repeating fatal message: something like "Could not load /lib/modules/2.6.31-17-generic/.dep". I had to switch off. It did reboot successfully from a LiveCD.
View 2 Replies
View Related
Feb 20, 2010
im not very educated in amd processors, but i think that they are all 64-bit processors.
i downloaded the amd ubuntu 9.10 into my computer, and used the usb maker utility in the system menu. i put in in my new pc (it was given to me), and i tell it to boot into the usb.
then i get this. i am posting a pic.
sorry about the sideways pic. i took it with my phone.
anyway, i get the syslinux boot shell script thingy. i have tried lots of things. linux, vmlinuz, lots of other things i found online. so what im wondering is the exact name of the kernel in ubuntu 9.10 amd version.
View 4 Replies
View Related
May 10, 2010
I am using ubuntu 9.10...now I have created an USB startup disk in my 1gb pen drive with a persistence region of 200MB. But after I have booted into the live ubuntu version using the pen drive how will I access the reserved space?.. I have tried mounting the pen drive but still couldn't access the reserved space.
NB:-I have only one FAT32 partition in my pen drive...
View 3 Replies
View Related
Jan 6, 2011
I presently have a Karmc LiveUSB with a casper-rw partition, but am thinking of changing the LiveUSB image to Maverick, while still using the existing casper-rw partition and its data (mostly settings for Ubuntu itself, haven't installed any programmes). Using usb-creator, by the way. Are the config files for Karmic and Maverick significantly different that this will cause any major problems? [Separately, I think this will have implications for my existing Karmic install, because I'm planning to clone my Karmic /home partition to a fresh Maverick install.
View 2 Replies
View Related
Sep 9, 2010
I have a Win vista dual booted with ubuntu, no problem there, all's well. I used live-usb to make a bootable USB with centos 5.0 I created the usb and it will boot just fine. The problem I run into is updating the installation with the package manager. I run the manager and the system prompts for reboot and I get this error:
memory for crash kernel (0x0 to (0x0) not within permissible range.
SDB: assuming drive cache: writethrough
SDB: assuming drive cache: writethrough
/init: line 486: /sysroot/etc/udev/rules.d/ 50-udev*: ambiguous redirect bug in initramfs /init detected
Dropping to a shell.
bash: no job control in this shell
bash-3.2#
View 6 Replies
View Related
Jan 26, 2010
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies
View Related
