OpenSUSE Install :: Stops At Boot But Can Boot As Root?
Jun 24, 2010
I'm new to OpenSuse and also fairly new to Linux in general. I installed OpenSuse 11.2 on a secondary machine and I really like it. However, during booting it stops somewhere half way, giving me only a black page but with a functioning cursor arrow. I can't do anything with it though. I re-booted in recovery mood and managed to boot up as root using the command 'startx'. How can I get back to "my own" log-in from here, with my own settings etc? There's obviously something missing during boot-up but where do I look?
View 5 Replies
ADVERTISEMENT
Jul 18, 2010
I have an issue with normal boot (fail safe boot doesn't have this problem). The boot process just stops and nothing happens, I just see the green background, the white lizard and no moving progress bar. I've given it about 40min without touching it, but nothing happened. If I press escape, the last log print says its mounting/mounted the hard drive. Not until I touch the head pad or press a key, it wakes up and the boot procedure continues. I once had a similar problem on opensuse 11.1 which could require much tickling before booting up completely. This was never seen on 10.3, 11.0 and 11.2, but now its back in 11.3.
View 9 Replies
View Related
Jun 8, 2011
There was an xorg update that I did today (June 8) and when try to boot into runlevel 3, it stops when it gets to starting up sntp. I also saw that it said DHCP client not running. When I try again (push the power button) and allow it to do what it wants, everything seems to start up just fine. I'm asking about this because I need to re-install my NVIDIA graphics card driver. For the boot options, I've tried clearing the text (I don't remember what they are at the moment) and typing:
Code:
nomodeset 3
and when that failed, I've tried it as
Code:
nomodeset3
but still get stuck at the same spot. I've also tried it without clearing the text but still it gets stuck.
How can I get to runlevel 3 in order to re-install my graphics card driver? I cannot run my 3D software without it. Can I switch to runlevel 3 from the usual (normal GUI) screen? I can't remember the command. I'm running SuSE 11.4.
View 9 Replies
View Related
May 19, 2011
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
View 4 Replies
View Related
Feb 27, 2010
what's the difference (if any) between choosing to boot from the MBR, the root partition or enabling neither? Referring to: pic23-MBR switch.png - Windows Live Would one be better for dual boots for example? (Using Vista too)
View 6 Replies
View Related
Oct 9, 2009
No matter if it is safe mode or regular the computer stops booting at Starting smartd I installed wine and samaba files (through Yast) before I restarted the computer and I was looking in FSTAB to get my HD's working. I didn't make any changes to FSTAB (I didn't even save the file).
View 1 Replies
View Related
Feb 1, 2010
this is a strange one. running 11.2 pae 32 bit kernel with all the most recent updates and gnome. This is a fresh install. I built the machine, and then installed all my repositories and software, and used the machine for about 2 days, and now when I log in it hangs on logging into gnome. it's strange because the wireless notification about available wireless networks is in the top left corner of the screen, and nothing else happens. I can log in as root.I also had this issue before I formatted the machine (that's why I formatted)
View 9 Replies
View Related
Nov 19, 2010
Recently, I had to switch harddrives on one of my servers due to the need for hardware.
However, when I switched back to the original harddrive I got a surprise : Instead of booting normally in OpenSuse 11.3, it booted in the grub shell.
I did a root ( hd0,1) but when I attempted the setup cmd it failed. Thinking that I probably was a configuration error ( nothing was changed - the drive had spent some time in a nice anti static bag ) I booted using a USB key.
To my surprise I got a message stating that parted couldn't read the other partitions ( boot and swap ) and hence I would not be able to edit then. Fortunately, the data partition seemed OK so I can backup the data.
Preferbly, I would like to be able to restore my original system.
View 2 Replies
View Related
May 20, 2011
Somehow, the wife got her laptop into this situation yesterday. The Windows partition booted normally when selected from GRUB but os 11.3 would boot to a command line login and pretty much everything besides CTRL-D was useless as the root partition was ro.
I booted a live CD and found two a couple of strange things. First, the system clock was reset to the default date/time (2007-xx-xx). I reset that. Second, after correcting the time I ran fsck on the root and home partitions. Both went through with no errors reported but the 20GB root partition took a long,long time to complete while the 80GB home partition went pretty quickly. After doing the above, the system booted normally but both partitions reported running the transaction log as well as forcing fsck where I had just done that. My question is for future reference: how does the system react to a grossly incorrect date/time, especially where all the drive data reports being much later than the reported system time? Would this be the reason for what I saw? I have no idea how the wife managed to reset the system clock, even if the
View 2 Replies
View Related
Jun 27, 2011
I forgot root password. I read that I have to access boot options during start up. I have two choices "desktop", "failsafe". There is boot options below but I cannot access it.
View 5 Replies
View Related
Aug 27, 2011
I was copying a file to my pendrive it was taking a very log time which was ridiculous so I cancelled it but when I reboot my sysem next time my root drive became almost full (20gb partition, 12gb was free before. now its only 3 gb is free) also my pendrive is dead in linux in window it says you have to format the pendrive before use it when I click on format, format stops and says you don't have permission. also Now I cannot write anything on my winodws c or d drive because of permission.
View 4 Replies
View Related
Apr 7, 2010
I installed the HPLips printer driver for my HP Officejet Pro 8500 Printer.
The driver often stops printing on its own (HP Device Manager => "Printer Control" tab shows "stopped"). I guess it does so when it encounters a situation where it cannot print right on.
The problem: Users without root permission cannot restart printing, even when everything is o.k.. They have to call me in order to "start printer", because restarting it needs root access.
Does anyone know how to solve the problem: either setting the driver not to turn to "stopped" or permitting a restart by normal users?
View 7 Replies
View Related
Aug 30, 2010
I'm trying to install Ubuntu on a computer with Vista SP2, my BIOS supports booting from a USB drive. Ive used unetbootin and Universal USB installer to setup the ISO on the drive, as well as trying Ubuntu version 10.04 and 9.10. The problem is that during the boot it stops at a line reading "SYSLINUX 3.86 2010-04-01 CBIOS Copyright ...", no error messages, it doesn't appear to be frozen as there is a blinking cursor under this line. The boot performs normally up to this point, it happens when, during a normal boot to vista, it says "boot from CD/DVD" then loads windows.It shouldn't be a hardware issue, the computer is pretty new, and I had an older version of Ubuntu install on it temporarily.
View 1 Replies
View Related
Feb 13, 2011
I use static IPs in my network and IFup(traditional) this one is dual boot..when the boot sequence is at the point of assigning the Ip it counts down and fails. But after startup I can do a network restart and it assigns the IP properly. I am running 11.1 and also had this problem with 10.1. I am using /dev/shm mounted as a tmpfs as
the system seems to move a little faster this way and I recall reading that fglrx (ati proprietary driver) needs it. So here is the weird part If I do not mount /dev/shm it assigns the IP properly on boot....if I mount /dev/shm it will not. I just recently discovered this as with 10.1 I just lived with the problem...but on a dual boot machine it is really a pain. Does anyone have any clue where to look for the issue?? I have tried emptying shm and it of course does not matter as it is a ram device.
View 2 Replies
View Related
Feb 23, 2011
I am attempting to install Maverick on an older pc. It has (2) mirrored 153 GB SATA drives. I set aside 33GB for a linux partition, by shrinking the partition in Vista.
Choosing to "Install along side windows" is not an available option. I can only choose use who disk, or use empty area. I choose use the empty area, and the Ubiquity installer gets hung up when attempting to format the empty space as EXT4. When I scroll up on the output I notice some error messages referencing NTFS. When I use Gparted it shows a possible problem.
Quote:
Warning:
The device /dev/sda1 doesn't exist
ntfsresize v2.0.0 (libntfs 10:0:0
ERROR(2):Failed to check 'dev/sda1' mount state: No such
file or directory
Probably /etc/mtab is missing. It's too risky to continue. You
might try an another Linux ditro.
Unable to read the contents of this file system!Because of this some operations may be unavailable.
The following list of software packages is required for ntfs file system support: ntfsprogs.
I ran chkdsk /r on the Vista partiton, in case there was a problem there. The issue still persists.
View 2 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Nov 23, 2010
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
View 9 Replies
View Related
Nov 4, 2010
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies
View Related
Jan 4, 2010
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
View 4 Replies
View Related
Feb 14, 2010
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
View 4 Replies
View Related
Sep 29, 2010
I have a Dell laptop with Windows XP installed, and for various reasons (Help: I borked my WindowsXP boot when installing OpenSUSE 11.3) I can not install a GRUB boot loader to the first hard drive (hd0).
I currently have a second hard drive in this laptop with a perfectly working OpenSUSE 11.3 instance, but no way to boot into it. I remember back in ancient times, a common option with Linux distros was to create a boot floppy to boot into Linux rather than installing GRUB or LILO to MBR. Since this laptop doesn't have a floppy drive I'd like to do the same thing with a USB stick. Is there any way to install GRUB (or something similar) to a USB stick? What I am not asking here is whether I can put a full, bootable Linux instance on a USB drive - I only want a boot loader on USB that launches to the appropriate mount point on (hd1).
View 6 Replies
View Related
May 26, 2011
I'm trying to dual-boot Windows 7 with openSuSE 11.4, i was told that i should install SuSE after windows 7 as it takes care of the boot-loader and automatically detects my windows installation and not vice-versa,
But that is not true in my case.
So i had 2 hard disks one had windows 7 installed and one was empty so i decided that i should get openSuSE 11.4 on the empty hard disk and dual-boot it with windows 7 (that i already had installed). Downloaded the DVD, put it on a USB and installed SuSE on the other hard disk normally, it detected my windows installation on my main hard disk but i didn't touch that, only formatted my other hard disk to ext4
After the installation it booted automatically into SuSE, but now every time on a fresh restart the system boots automatically into windows. Methods i have already tried to resolve this and it didn't work:
1. Booted from the DVD and selected an "Upgrade" not "New Installation" so i could boot again into my SuSE installation which did work, checked my "Boot Loader" options from YaST and checked the "Boot from MBR" option instead of the "Boot from root partition" option, That Did NOT work.
2. Used the same method to Boot into SuSE with the "Upgrade" Option opened up the terminal and tried to install grub manually again using this link
[Code]...
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Aug 5, 2010
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Mar 29, 2011
i want to install opensuse on my new lap top i partition my hard (600gb) with 5 parts:
c: 97 gb
d: 150 gb
e: 150 gb
f: 100 gb
g: 50 gb
and 38 gb unlocated part
in opensuse instalation , the yast makes a 2gb for swap 14gb = root , 21 gb = home, but in Instalation Overview under Booting has a red error: the Boot loader Installed On a Partition that does not Lie Entirely Blew 128 GB .The system maight Not Boot;
View 1 Replies
View Related
Aug 2, 2010
After asking on both this forum and the Fedora forum, I felt it was safe enough to install a copy of Fedora on my working-well openSUSE drive. I have a 1 TB drive, partitioned as follows:
I did an install of Fedora 13, was VERY careful to set up the installer to put it's files in the partitions I wanted, although I did let it mark the partition as active, feeling it may have to boot during the installation process.
I had grub installed in the root of the partition rather than the MBR for both systems.
When Fedora finished installing, I rebooted the system only to find that it wouldn't. I got the dreaded "No Boot Device" message.
So, I started the 5 hour process of booting with the parted magic disk, booting with a Gentoo live disk (only one around), monkeying with the install parts of the openSUSE and Fedora disks, swapping drives to Windows to download openSUSE Live CDs (yes, both) and searching the forums and various other web sites for some poor bloke who did the same stupid whatever it was I did, and finally, as I was using fdisk on the Gnome Live CD, I noticed the warning message stating that fdisk would not work on a drive that was partitioned with the GPD format.
Notice that I have 5 partitions? That is not a typo on my part, I used the GPD format when I set it up so I could do what I did without using "imitation" partitions.
When I used parted (the command line editor on the Gnome Live CD) to change the active partition, everything started working again! Well, at least I can boot the openSUSE system, the most important thing.
It is my suspicion that the Fedora install uses fdisk to do it's work, and fdisk just mucks up a GPD formatted disk. Not the information, just the part of the drive that holds the partition table. Perhaps just the flags section. I don't know enough to say with any certainty.
I didn't change the drives parameters during the installation of Fedora, so I don't know of it even offers the GPD partitioning option. If not, I can understand how this sort of thing could happen.
Still....So now all I have to do is make the grub menu, the one installed with openSUSE, boot the Fedora installation on the next partition. Seems simple enough.
View 4 Replies
View Related
Nov 21, 2010
I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
View 14 Replies
View Related
Mar 7, 2010
I recently did a kernel update usingCode:yum -y updateAfter update while booting progress reaches till the end and it stops there, it doesn't progress. If I use earlier kernel for booting I do not have any issues.
View 14 Replies
View Related
Jan 28, 2010
i got the following issue. I have Ubuntu 9.10 (x64) on an AMD Phenom II X4 with a Gigabyte mainboard (chipset AMD 785G) and a SATA II hard disk. Kernel version is 2.6.31-17-generic. After selecting Ubuntu from grub boot menu, I get a black screen and that's basically it.
This is a snipplet from syslog:
Code:
Jan 28 16:46:19 mind-the-gap kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Jan 28 16:46:19 mind-the-gap rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="862" x-info="http://www.rsyslog.com"] (re)start
[code]....
The odd think is, that this happens just from time to time (~50% of all boot attempts). Booting into failsave mode does work every time. Booting an older kernel (not failsave) doesn't work every time either.
View 1 Replies
View Related
