Ubuntu Installation :: Can't Boot Into LiveUSB With A Custom Pc (amd Processor)

Feb 20, 2010

im not very educated in amd processors, but i think that they are all 64-bit processors.

i downloaded the amd ubuntu 9.10 into my computer, and used the usb maker utility in the system menu. i put in in my new pc (it was given to me), and i tell it to boot into the usb.

then i get this. i am posting a pic.

sorry about the sideways pic. i took it with my phone.

anyway, i get the syslinux boot shell script thingy. i have tried lots of things. linux, vmlinuz, lots of other things i found online. so what im wondering is the exact name of the kernel in ubuntu 9.10 amd version.

View 4 Replies


ADVERTISEMENT

Ubuntu Installation :: 11.04 - No Boot Up From LiveUSB

Apr 29, 2011

Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.

View 4 Replies View Related

Fedora Installation :: Install From LiveUSB - 11 - Boot Can't Be Ext4

Jun 9, 2009

I booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.

Tried three times, still nothing.

The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...

View 3 Replies View Related

Ubuntu Installation :: Cannot Load LiveUSB And Slow Boot After Forced Shutdown

Mar 30, 2011

I experienced what i perceive as the craziest thing during 2 years of using ubuntu. About some months ago, I have two ubuntu installed on my HP-mini netbook: ubuntu 10.04 64 bit (CAElinux) and kubuntu 10.04, and run without problem.

One day, the netbook's battery run out of charge and I forgot to plug it in. The ubuntu, as usual, went to hibernate, but without harddisk noise, so I forced it to shutdown by pressing power button (as i think it is not normal). What happened later was the partition of 10.04 was broken, it could not boot, it even affected another partition as the netbook couldn't boot kubuntu 10.04.

I try to run liveUSB and CD of both distro and the liveCD/USB boot stopped on loading screen. So I try another linux distro: PCLinuxOS, which was able to boot but took very long time. The partition of ubuntu 10.04 could not be accessed.

After installing PClinuxOS in replace of kubuntu, I scanned the ubuntu 10.04 partition and the partition was fixed, I could access the partition and could load to ubuntu 10.04, but it took very long time. Here how it loaded: first: blank screen with blinking cursor, then ubuntu load screen, then back to blank screen with blinking cursor, then it showed numbers and sentences, like some scanning works. It took long time before login screen appeared (about 10-15 minute, while the prevously normal boot time in my netbook was less than 1 minute), but once its done, the ubuntu worked normally. This also the case in the PClinuxOS and the reason it load very slowly.

After this, I try to boot the liveUSB of various linux distro, and found some could boot while the others not:

Able to load with unusual slow boot time:
PClinuxOS (latest)
Ubuntu 8.04
Fedora (latest)
Linuxmint 8 (based on ubuntu 9)

Can't load
ubuntu 10.04 and 10.10
kubuntu 10.04
latest linuxmint

The liveUSB boot could take 1 hour. I also try the latest Puppy, Gentoo and OpenSuse liveUSB but it couldn't boot, and it likely the liveUSB problem. I made the all the liveUSB with unetbootin. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint could not boot even after I scanned the ubuntu 10.04 partition. There was no problem with the liveUSB as it would load normally on another computer. I think it is just the variant of ubuntu 10 that is not being able to boot.

I was not content on this slow boot, so I try to format the two partition of ubuntu and PClinuxOS (there are another partitions though), and installed ubuntu 8. But it also happened to boot slowly as the previous ubuntu. Then I replaced it with linuxmint 8, and the same occurred. So I try to install windows on another partition, and it boot normally.

The question is, what is happening. Why do the forced-shutdown-of-ubuntu-10.04 affect another partition, to the boot of another distro? If my HD was broken, the Windows would load very slowly too right? Yes, in SMART Data (from disk utility) it showed "few bad sector", but i think this is not related to the slow boot. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint cannot boot until this moment. I am thinking there are some informations planted on my computer, that twist it to load some distro slowly, and prevent it to load some others. But where and what? (I almost arrived to the thought that this is supernatural!)

Because of my long story up there (as I think it must be reported), the conclusion is:
1. Ubuntu 10.04 on my netbook was forced shutdown (by me)
2. It caused the partition broken
3. After fixing the partition (by scan, but I forgot the command), it took very long time to boot, but the ubuntu itself run normally
4. It also affected the boot of another distro (slow down the boot time), but Ms.Windows boot time is normal
5. It also caused ubuntu 10 (and its variant) to not be able to boot from liveCD/USB
6. It also caused me going crazy

Now im gonna format the whole HD in hope of ubuntu 10.04 (and later) could boot again, but shall it fix the problem? (as formatting the previously ubuntu 10.04 partition did not solve the problem). Or should I buy another HD (or even computer) to install natty!

View 9 Replies View Related

Fedora Installation :: 12 LiveUSB Fails To Boot (sleeping Forever..)?

Nov 20, 2009

I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]

View 5 Replies View Related

Fedora Installation :: LiveUSB Freezes At Boot Menu (15, X86_64)?

Jun 14, 2011

I'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:

Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely

[code]...

View 1 Replies View Related

Ubuntu Installation :: Studio 15 With I5 Processor (already Having Win7 Home) In Dual Boot Mode

Jun 3, 2010

i want to install ubuntu 10.04 on my studio 15 with i5 processor (already having win7 home ) in dual boot mode. i tried to install , it installed , but after restarting from second time onwards blank screen is coming and boot options are not coming , ERROR : no module found and with some values i tried for 4 times but unsuccessful , i did below steps

-my hdd is 320 so i separated 200(for win 7) , 50 (for personal ) , 40 unallocated for linux
-inserted ubuntu 10.04 rc1 CD
- in fourth step when selecting disk , i selected manual option(3rd)
- and i selected 40GB unallocated and formatted to ext4 and selected as root and install
- after reboot in boot options i can see 4 options i selected win 7 and from win7 i restarted
- after that black screen coming , boot options are not coming

View 1 Replies View Related

General :: Ubuntu Fails To Boot From LiveUSB?

Nov 8, 2010

I downloaded Ubuntu desktop 10.10 on to my Acer 5741 laptop (which I checked online for comptability), following the site's instructions to the letter. I used the USB installer to create a live USB which seemed to go fine. I then restarted as instructed and changed the USB to be selected to boot. However, from that point, the OS fails to load. I get several pages of code loading, then a screen with a logo at the bottom, then my screen just goes dark.

I've been using Windows 7 to download etc.

View 9 Replies View Related

OpenSUSE Install :: Cannot Boot From LiveUSB

Apr 15, 2010

I have a memory stick of 8GB and I partition it like that: The first partition is a big one approx 7GB for file transfers and stuff like that - is a FAT32 file system On the second partition I made a opneSUSE 11.2 Live USB with the following command:

dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync

After that I plugged the usb in other computer to boot from USB but the system is freezing on a black screen.

I used the first partition for file transfer because Windows seems to see only the first one.

View 3 Replies View Related

Ubuntu Installation :: Remove Install Option On Boot Custom Usb Live?

Jul 15, 2010

I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.

I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.

The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.

How can I remove that window on boot?

I want to boot directly on desktop...that way will be perfect!

View 1 Replies View Related

OpenSUSE Install :: LiveUSB Hanging At Boot?

Nov 26, 2010

I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.

I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.

When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.

When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...

I have also tried installing using the NET iso however I have exactly the same outcome.

This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.

View 3 Replies View Related

General :: Getting Error Message When Trying To Boot A LiveUSB / Fix It?

Jul 16, 2011

I am quite new to Linux, so bear with me if I ask silly questions. For homework (and fun) purposes I needed to create a bootable USB of Fedora12. Which I did, successfully I might add However, when I rebooted the computer, I got this puzzling error message code...

What have I done wrong here?

View 5 Replies View Related

Fedora Installation :: Erratic Install Results W/initrd - Custom Spins With Custom Drivers - Modules?

Dec 28, 2009

Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.

The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]

My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.

The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.

Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?

And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?

How does moving to dracut as the initrd tool affect any/all of the above?

View 1 Replies View Related

Debian Installation :: Creating Boot Script For Custom Commands In Jessie

May 11, 2015

I didn't change anything; it just stopped working on boot. I've changed permissions according to messages from log files. No good.I now get messages saying "unable to open display ' '." If I set the display (I've done this several ways, the messages say "unable to open display ':0'."

Systemd is taking control of everything basic, with almost no documentation and no configuration tools at all: rationalization by lunatics.You can make a script to run commands on boot using systemd on Jessie by creating two files: the script, in any location a file in /etc/systemd/system that runs that script..My script is called james-boot.service, placed in my /home/james/.bin directory.

#! /bin/sh
# this is run by /etc/systemd/system/james-boot.service
# Enable with sudo systemctl enable james-boot.service
# Check with sudo systemctl status james-boot.service
# If it says the service is loaded, it's OK -- inactive only means it's done running.

[code]....

This file must have ownership root.root, with (apparently) permissions 664 (rw-rw-r--).After creating, enable with sudo systemctl enable james-boot. service.Check with sudo systemctl status james-boot.service. If it says the service is loaded, it's OK -- "inactive" only means it's done running.

View 4 Replies View Related

OpenSUSE Install :: Acer TimeLine 3810TZ Can't Boot From LiveUSB

Nov 30, 2009

I want to install OpenSUSE 11.2 on my Acer TimeLine 3810TZ which has no DVD Drive and it reports that it's written it A-OK.So I go to my laptop, enter the BIOS to give priority boot to the USB (It has Three USB entries, USB-CDROM, USB-HDD, USB-FDD, so I just put them all before any HDDs, figuring it'd cycle through them) and reboot with my stick in one of the USB slots.

And then it hangs on the BIOS. It lights up my USB Stick's activity light like crazy, but it never actually leaves the BIOS screen (POST screen). Any idea what's going on? I'm kind of stuck with Windows Vista, and we all know how bad that is

View 9 Replies View Related

General :: LiveUSB - Boot Screen Appears But Do Not Start And Continue

Aug 5, 2010

I created a live usb and I am trying to boot linux, but after it starts a large written ubuntu screen when starting appears i.e its boot screen but it do not start and continues as if it is still loading.

View 8 Replies View Related

Fedora Installation :: Custom - Lvm2 Group With Encryption And Have The /boot File Stored Within?

Oct 15, 2009

I need to install a lvm2 group with encryption and have the /boot file stored within. Is this possible in Fedora's graphical installer? I know it can be achieved in Arch(I know I'll need grub2, I assume that's coming in Fedora 12) I can always install it separately.

View 6 Replies View Related

Ubuntu Installation :: Write LiveUSB Changes To USB

Feb 6, 2010

I'm wondering if it's possible to write changes to a LiveUSB stick. As you probably already know ubuntu gets mounted to a ramdisk to improve performance and save your USB stick's life (I think so anyway, don't quote me on that).

I'm wondering if it's possible to write any changes made, such as changing running services and installed packages back to the USB stick without actually installing ubuntu fully onto the USB stick.

View 1 Replies View Related

Ubuntu Installation :: As A LiveUSB Or VM On A USB Stick ?

Sep 1, 2011

I dont really use ubuntu too much, just for my programming class. Anyways I want to have ubuntu on a USB stick so I can use it on my laptop, netbook, desktop PC at home and desktop PC in class, all of which run Windows natively.

I would prefer the Virtual Machine (VM) on a USB stick but im not sure if its possible to install virtualbox (my VM of choice) on a USB drive. if not then a liveUSB, though correct me if im wrong but would i be able to save files on a liveusb?

If I do go with the VM on the usb stick option, i need an idea what size USB stick to buy so what is the bare minimum space you can run ubuntu on? I also intend to run OpenSUSE which is why i prefer the portable vm option.

View 1 Replies View Related

Installation :: Can't Install Anything In Ubuntu LiveUSB / Resolve This?

Jan 6, 2010

I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message

Code...

I have no idea how can I solve this .

View 1 Replies View Related

Ubuntu Installation :: LiveUSB Persistence Error

Jun 1, 2011

I have a USB with two partitions, one FAT32 with Ubuntu 10.04 on it, and one ext4 partition labelled casper-rw. According to the docs this should do to create a persistence installation, but I still get the "can't find persistence medium" error when booting.

Did I do something wrong or is this a bug?

I installed with unetbootin on the FAT32 partition and created the partitions using GParted.

View 3 Replies View Related

Ubuntu Installation :: Karmic - Failed Update To LiveUSB?

Jan 7, 2010

I created a LiveUSB and that worked. On about the 3rd use I attempted to update packages - about 174 came up I think (I saw that number on another post which reminded me, hence the precision). Two or three dialogues came up, unfortunately unintelligible to me, a Ubuntu novice. Both concerned grub2. The first I just forwarded on and the update trundled on. The 2nd asked me something like whether I wanted grub to update sda or sdb. I checked neither (against the pop-up help advice). The update completed but when I eventually went to reboot from the USB I got a repeating fatal message: something like "Could not load /lib/modules/2.6.31-17-generic/.dep". I had to switch off. It did reboot successfully from a LiveCD.

View 2 Replies View Related

Ubuntu Installation :: Accessing Liveusb Reserved Space?

May 10, 2010

I am using ubuntu 9.10...now I have created an USB startup disk in my 1gb pen drive with a persistence region of 200MB. But after I have booted into the live ubuntu version using the pen drive how will I access the reserved space?.. I have tried mounting the pen drive but still couldn't access the reserved space.

NB:-I have only one FAT32 partition in my pen drive...

View 3 Replies View Related

Ubuntu Installation :: Upgrading LiveUSB While Retaining Persistence

Jan 6, 2011

I presently have a Karmc LiveUSB with a casper-rw partition, but am thinking of changing the LiveUSB image to Maverick, while still using the existing casper-rw partition and its data (mostly settings for Ubuntu itself, haven't installed any programmes). Using usb-creator, by the way. Are the config files for Karmic and Maverick significantly different that this will cause any major problems? [Separately, I think this will have implications for my existing Karmic install, because I'm planning to clone my Karmic /home partition to a fresh Maverick install.

View 2 Replies View Related

Fedora Installation :: LiveUSB Not Booting 14

Nov 3, 2010

I have a 4GB USB Flash Drive that I would like to install Fedora 14 Live on.

Process:

Downloaded the Fedora 14 i686 Live ISO file Used the Fedora LiveUSB Creator on my USB with the Fedora 14 ISO

I changed my BIOS on my Dell Inspiron E1505 to boot from a USB, then CD-DVD ROM, then Internal HDD Had USB inserted, then turned on computer.

Received the following message:

And then it sticks. I've found two other internet sites that have had this problem. One is in chinese, the other is in french. I know french, but the 'solution' was not clear.

View 14 Replies View Related

Software :: AMD Processor Fedora Doesnt Support AMD Processor?

Jan 5, 2010

i have installed ubuntu in my laptop.since i have AMD processor fedora doesnt support AMD processor..the recent version fedora 12 supprots AMD processor.i am doing my final project in ns2 hence it should support tht too!!! Which is the best choice to override ubuntu grub fedora 12 or redhat linux.

View 3 Replies View Related

Fedora Installation :: LiveUSB - Doesnt Seem To Work

Aug 20, 2010

I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!

Here is the message i get:

View 10 Replies View Related

Fedora Installation :: LiveUSB No Graphics - No Install

Jun 4, 2011

I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.

View 3 Replies View Related

Fedora Installation :: F15 LiveUSB - Error That Says A Package Has Crashed

Aug 30, 2011

I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)

View 2 Replies View Related

General :: LiveUSB - Cannot Update Installation With Package Manager

Sep 9, 2010

I have a Win vista dual booted with ubuntu, no problem there, all's well. I used live-usb to make a bootable USB with centos 5.0 I created the usb and it will boot just fine. The problem I run into is updating the installation with the package manager. I run the manager and the system prompts for reboot and I get this error:

memory for crash kernel (0x0 to (0x0) not within permissible range.
SDB: assuming drive cache: writethrough
SDB: assuming drive cache: writethrough
/init: line 486: /sysroot/etc/udev/rules.d/ 50-udev*: ambiguous redirect bug in initramfs /init detected
Dropping to a shell.
bash: no job control in this shell
bash-3.2#

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved