not a ubuntu issue, and I tried it with UNEBOOTIN both on win7 and ubuntu... I can't make a bootable liveUSB with those. It either has a blank screen when booting through USB or it says some error occured... Any other known way to make one? I do not have an optic drive.
View 1 RepliesCan I make a LiveUSB with persistance that can boot on a Mac or a PC? I have heard about GRUB2 but I have been having trouble installing it. rEFIt can be installed on the Mac and used to boot the USB but I want a method that allows me to bring my flash drive anywhere and boot the OS. I want there to be no required software on the other computer. Is this possible? If so can anybody post a guide on how to do it?
View 1 Replies View RelatedI would like to make a bootable liveUSB of Ubuntu 11 or Mint 10 so that it can run ClamTK. Can anyone helo or point me in the right direction. I was told I need a USB-Stick to do that as ClamTK will need some space to write on.
View 4 Replies View RelatedI have a memory stick of 8GB and I partition it like that: The first partition is a big one approx 7GB for file transfers and stuff like that - is a FAT32 file system On the second partition I made a opneSUSE 11.2 Live USB with the following command:
dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync
After that I plugged the usb in other computer to boot from USB but the system is freezing on a black screen.
I used the first partition for file transfer because Windows seems to see only the first one.
I've created the GParted LiveUSB from what I found on the Ubuntu forum. Apparently the instructions given on GParted website doesn't work.
I essentially copied the necessary gparted files to my USB and then made it bootable using syslinux.
I've set the boot sequence properly to boot from my USB but it still doesn't do anything and just brings up the screen where I select my OSs (I have a dual-boot system with WinXP).
I don't have access to a CD-drive so will have to use the USB. Is there a different way to make the LiveUSB?
I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.
I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.
When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.
When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...
I have also tried installing using the NET iso however I have exactly the same outcome.
This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.
I want to install OpenSUSE 11.2 on my Acer TimeLine 3810TZ which has no DVD Drive and it reports that it's written it A-OK.So I go to my laptop, enter the BIOS to give priority boot to the USB (It has Three USB entries, USB-CDROM, USB-HDD, USB-FDD, so I just put them all before any HDDs, figuring it'd cycle through them) and reboot with my stick in one of the USB slots.
And then it hangs on the BIOS. It lights up my USB Stick's activity light like crazy, but it never actually leaves the BIOS screen (POST screen). Any idea what's going on? I'm kind of stuck with Windows Vista, and we all know how bad that is
I've installed the XFCE iso of Fedora 14 (the 64x edition) onto a 4 gig flash drive. When I try to boot from the drive, a command-line (BIOS?) interface pops up with the following text (no prompt).
Code:
It hangs there without going any further. I'm currently downloading a different version of Fedora 14, so maybe it's just a bad install. Or maybe this is something that I should have encountered before. Any ideas on how to get it booted up?
Today I installed starDict in my Fedora LiveUSB, after I reboot machine. The system backtrack the original one, and then I update the kernel, the system also backtrack.
Why LiveUSB have this function. Can you explain theory about LiveUSB.
I have a 4GB USB Flash Drive that I would like to install Fedora 14 Live on.
Process:
Downloaded the Fedora 14 i686 Live ISO file Used the Fedora LiveUSB Creator on my USB with the Fedora 14 ISO
I changed my BIOS on my Dell Inspiron E1505 to boot from a USB, then CD-DVD ROM, then Internal HDD Had USB inserted, then turned on computer.
Received the following message:
And then it sticks. I've found two other internet sites that have had this problem. One is in chinese, the other is in french. I know french, but the 'solution' was not clear.
All USB devices do not work/initialise, except when I run Ubuntu 10.04 liveUSB (netbook version). The problem arose following upgrade from Ubuntu 9.10 to 10.04, but only manifested after a couple of weeks. I've tried other distros and the problem persists in Fedora 13 which I am now using.
Output of lsusb with a USB memory stick and mouse in the ports is:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
Here is the message i get:
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
View 3 Replies View RelatedI booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies View RelatedI have the following trouble when I try to install Fedora 10 with a USB Flash Drive created by Fedora LiveUSB 3.6.3 [url]...ator-3.6.3.zip in a HP Mini-Note 2133 Notebook.
Everything looked ok during install, restarted the PC, get the booting count down and splash screen.
After some seconds then get this:
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
View 5 Replies View RelatedI'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:
Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely
[code]...
Im trying to install ubuntu 11.04 over my current fedora 15 due to lack of compatibility with my itouch 4g.
Heres the steps i take:
Open LiveUSB-creator.
Point to .iso file for 11.04.
Select proper device
Then it gives me an error like so:
There was a problem executing the following command:
A more detailed error log has been written to '/tmp/liveusb-creator.log' ISO MD5 checksum verification failed.
I've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
I use my Ubuntu LiveUSB (LiLi USB Creator) on various machines and everything works perfectly.
Though, even though I got the NVidia driver to work properly on my laptop, the "Desktop Effects" keeps getting turned off it seems.
For Compiz to work, I have to go to System - Preferences - Appearance and tell it Extra affects and Compiz will turn back on, though losing all settings.
Is there a reason Compiz and Desktop Effects are not getting persistence when every other part of the system has it?
I just downloaded a new copy of Ubuntu 11.04 and burnt it to a disc and made a LiveUSB. But whenever I try booting from the USB it starts loading, then goes into a black screen with a bunch of text. My computer booted from a live USB before and it worked.I have an Aspire 5552 if the helps and the USB I am using is a 4GB SanDisk Cruzer.
View 2 Replies View RelatedI'm wondering if it's possible to write changes to a LiveUSB stick. As you probably already know ubuntu gets mounted to a ramdisk to improve performance and save your USB stick's life (I think so anyway, don't quote me on that).
I'm wondering if it's possible to write any changes made, such as changing running services and installed packages back to the USB stick without actually installing ubuntu fully onto the USB stick.
Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.
View 4 Replies View RelatedI dont really use ubuntu too much, just for my programming class. Anyways I want to have ubuntu on a USB stick so I can use it on my laptop, netbook, desktop PC at home and desktop PC in class, all of which run Windows natively.
I would prefer the Virtual Machine (VM) on a USB stick but im not sure if its possible to install virtualbox (my VM of choice) on a USB drive. if not then a liveUSB, though correct me if im wrong but would i be able to save files on a liveusb?
If I do go with the VM on the usb stick option, i need an idea what size USB stick to buy so what is the bare minimum space you can run ubuntu on? I also intend to run OpenSUSE which is why i prefer the portable vm option.
I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .
I can't log in to my current install of 10.04 (x server doesn't start, or whatever, not too concerned about that), and I would like to at least get my files from my home directory, but most of them are inaccessible when I boot up with my LiveUSB of 10.04, due to permissions, I suppose. Is there an easy way to get them? I know the password to my log in,
View 1 Replies View RelatedI am using default USB Startup disk creator for spreading new versions of ubuntu on all my machines. In 10.04, I point it to GnomeLiveCD of 600Mb, and usual 4Gb flash drive. And the application says I have not enough space.4Gb is empty, fresh formatted, with right partiion. It is OK in short. Do somebody know what to do with app?
View 3 Replies View Relatedim runing ubuntu 10.04.
i just had a init input output error, (and ubuntu wound not boot) so i decided to boot from my live USB to see my fstab file. It booted about 5 times then started to return an input/output ewrror (cant mount)
Hard drive checks ok as per the bios. Ubuntu will not boot and cant try any other OS (no CD drive) (I have tried 3 diffrent live USBs) what next?
I was using Ubuntu netbook remix 10.10 liveusb ver. and then someone unplug my power and then i unaware of it and leave it. after serval hours, i find it and the screen go blacke. when i reboot with the LiveUSB, i find it just same as not being used before. although it is what Live USB supposed to do if someone restart the computer with it, but i check the deafult setting when the battery become extremely low it should hibernate install, and why LiveUSB ver. would loss all data after hibernate as same as restart?
View 9 Replies View Related