I have recently setup Ubuntu 9.10 in my USB pendrive using LiLi USB Creator tool.
I have given persistence with 1530MB.
Now the problem is if i want to install any software from the Ubuntu Software center, it shows a message
Code...
I have no idea how can I solve this .
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
View 3 Replies View RelatedI booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
I have a persistent liveusb with ubuntu 9.10 that I installed using the method on [url]
I use it on a Dell Inspiron Mini 9 netbook (that boots Mac OS X from its SSD). An ubuntu persistent liveusb works just great for occasional linux development and testing, but ubuntu 9.10 will be EOL next year, and I want to stay current.
I've installed ubuntu 10.04.1 LTS on a liveusb using the method on [url]
After I've booted the liveusb, under the network menu I see this:
Wireless Networks
Device not ready
A menu appears that looks like a PCI card with a lock on it. I select the only item under that menu, "Install Drivers". This gives a dialog that says "No proprietary drivers are in use on this system. Proprietary drivers do not have public source code..." etc. Under Ubuntu 9.10, I could at this point select "Broadcom STA wireless driver" and click the "Activate" button, and it would work. So I did that in 10.04.1.
It says, "Downloading and installing driver..."
While it's doing this, the "kerneloops" menu item appears. Then a dialog that says,
Sorry, the package "bcmwl-kernel-source 5.60.48.36 +bdcom-0ubuntu3" failed to install or upgrade.
Then another dialog that says
SystemError: installArchives() failed.
What the heck is happening here?
Well, it turns out that the error messages are wrong. I restarted and the DM9/ubuntu 10.04.1 was able to connect to the wireless network.
tl;dr: Proprietary wireless driver installation works, but it claims that it doesn't.
I'm wondering if it's possible to write changes to a LiveUSB stick. As you probably already know ubuntu gets mounted to a ramdisk to improve performance and save your USB stick's life (I think so anyway, don't quote me on that).
I'm wondering if it's possible to write any changes made, such as changing running services and installed packages back to the USB stick without actually installing ubuntu fully onto the USB stick.
Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.
View 4 Replies View RelatedI dont really use ubuntu too much, just for my programming class. Anyways I want to have ubuntu on a USB stick so I can use it on my laptop, netbook, desktop PC at home and desktop PC in class, all of which run Windows natively.
I would prefer the Virtual Machine (VM) on a USB stick but im not sure if its possible to install virtualbox (my VM of choice) on a USB drive. if not then a liveUSB, though correct me if im wrong but would i be able to save files on a liveusb?
If I do go with the VM on the usb stick option, i need an idea what size USB stick to buy so what is the bare minimum space you can run ubuntu on? I also intend to run OpenSUSE which is why i prefer the portable vm option.
I'm trying to dual boot 9.10 with Vista on an HP Pavilion Slimline (AMD64). I've tried both booting from a disk and using Wubi, and neither has worked. Booting from the disk takes me through the screen where I can choose to try Ubuntu without installing, but after selecting that, the desktop didn't load, the screen just went to black.
I decided to try Wubi, and it went well enough. Everything in windows worked, and upon rebooting, it was able to finish checking the installation. After one more reboot, I selected Ubuntu from the Windows boot manager, and then the grub command prompt appears. I can't seem do anything after that except reboot.
I have no idea what's going on with this computer.
In Ubuntu 10.10 am trying to install Aptitude and have been through installing and un-installing but keep getting the same msg
Failed to execute child process "su-to-root" (No such file or directory)
how to resolve this issue.
I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...
Next, what happens in detail:
Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.
Next, what I have tried to fix it so far:
Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.
Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.
I have a memory stick of 8GB and I partition it like that: The first partition is a big one approx 7GB for file transfers and stuff like that - is a FAT32 file system On the second partition I made a opneSUSE 11.2 Live USB with the following command:
dd if=/path/to/iso/openSUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdX bs=4M;sync
After that I plugged the usb in other computer to boot from USB but the system is freezing on a black screen.
I used the first partition for file transfer because Windows seems to see only the first one.
Downloaded the torrent first, burned to a new DVD-RW, and tried all install options I could think of. Then downloaded to file, burned to another new DVD-RW, same result. This morning I downloaded the Live CD, and it got all the way to the blue screen just before the login page, and stuck there. I finally gave up and reinstalled Fedora 10 again on my drive. The problen seemed to be with a missing or corrupted package, although I can't remember exactly remember which one. My machine is a custom one, Nvidia Gforce, and an Elite Group MB. F10 runs fine, no problems at all. Is this a commom problem with 11?
View 4 Replies View RelatedI have a USB with two partitions, one FAT32 with Ubuntu 10.04 on it, and one ext4 partition labelled casper-rw. According to the docs this should do to create a persistence installation, but I still get the "can't find persistence medium" error when booting.
Did I do something wrong or is this a bug?
I installed with unetbootin on the FAT32 partition and created the partitions using GParted.
I made a quick little USB install of Ubuntu using the USB Creator thing in Ubuntu 9.10 (I gave it room to store data also). I use this USB on two computers (Both Toshiba Laptops) and one of them needs restricted drivers for 3D. If I install them, will it mess up where it won't work on any other computers?
View 3 Replies View RelatedCan't install sp-auth code...
View 6 Replies View RelatedI have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.
I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.
When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.
When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...
I have also tried installing using the NET iso however I have exactly the same outcome.
This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.
I created a LiveUSB and that worked. On about the 3rd use I attempted to update packages - about 174 came up I think (I saw that number on another post which reminded me, hence the precision). Two or three dialogues came up, unfortunately unintelligible to me, a Ubuntu novice. Both concerned grub2. The first I just forwarded on and the update trundled on. The 2nd asked me something like whether I wanted grub to update sda or sdb. I checked neither (against the pop-up help advice). The update completed but when I eventually went to reboot from the USB I got a repeating fatal message: something like "Could not load /lib/modules/2.6.31-17-generic/.dep". I had to switch off. It did reboot successfully from a LiveCD.
View 2 Replies View Relatedim not very educated in amd processors, but i think that they are all 64-bit processors.
i downloaded the amd ubuntu 9.10 into my computer, and used the usb maker utility in the system menu. i put in in my new pc (it was given to me), and i tell it to boot into the usb.
then i get this. i am posting a pic.
sorry about the sideways pic. i took it with my phone.
anyway, i get the syslinux boot shell script thingy. i have tried lots of things. linux, vmlinuz, lots of other things i found online. so what im wondering is the exact name of the kernel in ubuntu 9.10 amd version.
I am using ubuntu 9.10...now I have created an USB startup disk in my 1gb pen drive with a persistence region of 200MB. But after I have booted into the live ubuntu version using the pen drive how will I access the reserved space?.. I have tried mounting the pen drive but still couldn't access the reserved space.
NB:-I have only one FAT32 partition in my pen drive...
I presently have a Karmc LiveUSB with a casper-rw partition, but am thinking of changing the LiveUSB image to Maverick, while still using the existing casper-rw partition and its data (mostly settings for Ubuntu itself, haven't installed any programmes). Using usb-creator, by the way. Are the config files for Karmic and Maverick significantly different that this will cause any major problems? [Separately, I think this will have implications for my existing Karmic install, because I'm planning to clone my Karmic /home partition to a fresh Maverick install.
View 2 Replies View RelatedWhen I boot the ubuntu live cd (9.10) and attempt to install it only gives two options at the partitioning screen. One is to use the whole disk and the other is to manualy assign partitions. I told it to resize one of my partitions and created 18GB of free space. However, it tells me this space is "unusable". It wouldn't let me do anything with it and I used windows vista disk manager to add it back to the original partition. I have one hard drive with four partitions. One is a restore partition, one windows partition, one storage partition, and one that says xp although i don't have xp installed. It might be used by the acer restore program. It's an acer aspire 6920.
View 2 Replies View RelatedAfter installing Ubuntu Server 10.04 LTS, I restarted my machine. I removed the disk, but now when it starts, it never gets to GRUB. Instead, it just takes me to a black screen with a blinking cursor. I can't type in anything and holding shift doesn't take me to GRUB.
View 9 Replies View RelatedI have a 4GB USB Flash Drive that I would like to install Fedora 14 Live on.
Process:
Downloaded the Fedora 14 i686 Live ISO file Used the Fedora LiveUSB Creator on my USB with the Fedora 14 ISO
I changed my BIOS on my Dell Inspiron E1505 to boot from a USB, then CD-DVD ROM, then Internal HDD Had USB inserted, then turned on computer.
Received the following message:
And then it sticks. I've found two other internet sites that have had this problem. One is in chinese, the other is in french. I know french, but the 'solution' was not clear.
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
Here is the message i get:
I want to install OpenSUSE 11.2 on my Acer TimeLine 3810TZ which has no DVD Drive and it reports that it's written it A-OK.So I go to my laptop, enter the BIOS to give priority boot to the USB (It has Three USB entries, USB-CDROM, USB-HDD, USB-FDD, so I just put them all before any HDDs, figuring it'd cycle through them) and reboot with my stick in one of the USB slots.
And then it hangs on the BIOS. It lights up my USB Stick's activity light like crazy, but it never actually leaves the BIOS screen (POST screen). Any idea what's going on? I'm kind of stuck with Windows Vista, and we all know how bad that is
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
I experienced what i perceive as the craziest thing during 2 years of using ubuntu. About some months ago, I have two ubuntu installed on my HP-mini netbook: ubuntu 10.04 64 bit (CAElinux) and kubuntu 10.04, and run without problem.
One day, the netbook's battery run out of charge and I forgot to plug it in. The ubuntu, as usual, went to hibernate, but without harddisk noise, so I forced it to shutdown by pressing power button (as i think it is not normal). What happened later was the partition of 10.04 was broken, it could not boot, it even affected another partition as the netbook couldn't boot kubuntu 10.04.
I try to run liveUSB and CD of both distro and the liveCD/USB boot stopped on loading screen. So I try another linux distro: PCLinuxOS, which was able to boot but took very long time. The partition of ubuntu 10.04 could not be accessed.
After installing PClinuxOS in replace of kubuntu, I scanned the ubuntu 10.04 partition and the partition was fixed, I could access the partition and could load to ubuntu 10.04, but it took very long time. Here how it loaded: first: blank screen with blinking cursor, then ubuntu load screen, then back to blank screen with blinking cursor, then it showed numbers and sentences, like some scanning works. It took long time before login screen appeared (about 10-15 minute, while the prevously normal boot time in my netbook was less than 1 minute), but once its done, the ubuntu worked normally. This also the case in the PClinuxOS and the reason it load very slowly.
After this, I try to boot the liveUSB of various linux distro, and found some could boot while the others not:
Able to load with unusual slow boot time:
PClinuxOS (latest)
Ubuntu 8.04
Fedora (latest)
Linuxmint 8 (based on ubuntu 9)
Can't load
ubuntu 10.04 and 10.10
kubuntu 10.04
latest linuxmint
The liveUSB boot could take 1 hour. I also try the latest Puppy, Gentoo and OpenSuse liveUSB but it couldn't boot, and it likely the liveUSB problem. I made the all the liveUSB with unetbootin. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint could not boot even after I scanned the ubuntu 10.04 partition. There was no problem with the liveUSB as it would load normally on another computer. I think it is just the variant of ubuntu 10 that is not being able to boot.
I was not content on this slow boot, so I try to format the two partition of ubuntu and PClinuxOS (there are another partitions though), and installed ubuntu 8. But it also happened to boot slowly as the previous ubuntu. Then I replaced it with linuxmint 8, and the same occurred. So I try to install windows on another partition, and it boot normally.
The question is, what is happening. Why do the forced-shutdown-of-ubuntu-10.04 affect another partition, to the boot of another distro? If my HD was broken, the Windows would load very slowly too right? Yes, in SMART Data (from disk utility) it showed "few bad sector", but i think this is not related to the slow boot. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint cannot boot until this moment. I am thinking there are some informations planted on my computer, that twist it to load some distro slowly, and prevent it to load some others. But where and what? (I almost arrived to the thought that this is supernatural!)
Because of my long story up there (as I think it must be reported), the conclusion is:
1. Ubuntu 10.04 on my netbook was forced shutdown (by me)
2. It caused the partition broken
3. After fixing the partition (by scan, but I forgot the command), it took very long time to boot, but the ubuntu itself run normally
4. It also affected the boot of another distro (slow down the boot time), but Ms.Windows boot time is normal
5. It also caused ubuntu 10 (and its variant) to not be able to boot from liveCD/USB
6. It also caused me going crazy
Now im gonna format the whole HD in hope of ubuntu 10.04 (and later) could boot again, but shall it fix the problem? (as formatting the previously ubuntu 10.04 partition did not solve the problem). Or should I buy another HD (or even computer) to install natty!
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies View RelatedI have a Win vista dual booted with ubuntu, no problem there, all's well. I used live-usb to make a bootable USB with centos 5.0 I created the usb and it will boot just fine. The problem I run into is updating the installation with the package manager. I run the manager and the system prompts for reboot and I get this error:
memory for crash kernel (0x0 to (0x0) not within permissible range.
SDB: assuming drive cache: writethrough
SDB: assuming drive cache: writethrough
/init: line 486: /sysroot/etc/udev/rules.d/ 50-udev*: ambiguous redirect bug in initramfs /init detected
Dropping to a shell.
bash: no job control in this shell
bash-3.2#
I have the following trouble when I try to install Fedora 10 with a USB Flash Drive created by Fedora LiveUSB 3.6.3 [url]...ator-3.6.3.zip in a HP Mini-Note 2133 Notebook.
Everything looked ok during install, restarted the PC, get the booting count down and splash screen.
After some seconds then get this:
