I'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:
Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely
[code]...
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
I booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
View 5 Replies View RelatedI'm having difficulty upgrading from 6.06lts to 10.10.
I have downloaded and burnt a cd, however it freezes on any option from the boot menu. I've tried the various options to no avail.
So i then tried a frugal install using unetbootin however when I try bootin through that using the 10.10 iso it comes up with this
Code:
My computer cannot boot from a usb. I have tried.
There is already a couple of "freezing" discussions surrounding Fedora 13, but as the problem seems to exist still with Fedora 14 x86_64 I decided to launch another thread.
SYMPTOMS:
* System freezes 'random' running GNOME or KDE (latest versions) - can happen in 10 sec after login, or in 3 hours after login.
* Looks like it does not freeze that often while in 'idle'.
* May reboot by itself or not - may require manual cold-boot.
* a Kernel crash is created with information:
REASON: WARNING: at drivers/pci/search.c:44 ci_find_upstream_pci_bridge+0x55/0x6d()
CONFIGURATION:
* ASUS P7P550 board with 8G RAM, 0-7 Intel Core i7 CPU
* 2 HDDs / SATA, default layout, LUKS
* NVIDIA GeForce 9600 GT running with NVIDIA Driver Version 260.19.12, dual monitors.
I've already submitted an KernelOops.
a) fixing b) workaround c) a hardware issue? I have Fedora 14 64-bit running on my Lenovo W700 laptop w. Nvidia drivers as well - not a single problem exists (well, except that loading issue that keeps you moving mouse to work...)
Switched off ubuntu when I installed windows 7 for a bit, didn't have time to learn the intricacies of both systems. Saw the new release and wanted to try it out. Followed the ubuntu instructions on how to install it and make a live usb. Using a 4 GB Sandisk Cruzer straight out of the box. When I boot to the usb, I get to screen that asks whether I want to run ubuntu from the USB, or to install it on my computer. Selecting the run from USB option shows a bunch of commands cycling through for a bit, then the screen goes black and just stays that way. Not really sure what the problem is. Trying to run the 64 bit version fyi.
View 4 Replies View Relatedim not very educated in amd processors, but i think that they are all 64-bit processors.
i downloaded the amd ubuntu 9.10 into my computer, and used the usb maker utility in the system menu. i put in in my new pc (it was given to me), and i tell it to boot into the usb.
then i get this. i am posting a pic.
sorry about the sideways pic. i took it with my phone.
anyway, i get the syslinux boot shell script thingy. i have tried lots of things. linux, vmlinuz, lots of other things i found online. so what im wondering is the exact name of the kernel in ubuntu 9.10 amd version.
Partition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
I experienced what i perceive as the craziest thing during 2 years of using ubuntu. About some months ago, I have two ubuntu installed on my HP-mini netbook: ubuntu 10.04 64 bit (CAElinux) and kubuntu 10.04, and run without problem.
One day, the netbook's battery run out of charge and I forgot to plug it in. The ubuntu, as usual, went to hibernate, but without harddisk noise, so I forced it to shutdown by pressing power button (as i think it is not normal). What happened later was the partition of 10.04 was broken, it could not boot, it even affected another partition as the netbook couldn't boot kubuntu 10.04.
I try to run liveUSB and CD of both distro and the liveCD/USB boot stopped on loading screen. So I try another linux distro: PCLinuxOS, which was able to boot but took very long time. The partition of ubuntu 10.04 could not be accessed.
After installing PClinuxOS in replace of kubuntu, I scanned the ubuntu 10.04 partition and the partition was fixed, I could access the partition and could load to ubuntu 10.04, but it took very long time. Here how it loaded: first: blank screen with blinking cursor, then ubuntu load screen, then back to blank screen with blinking cursor, then it showed numbers and sentences, like some scanning works. It took long time before login screen appeared (about 10-15 minute, while the prevously normal boot time in my netbook was less than 1 minute), but once its done, the ubuntu worked normally. This also the case in the PClinuxOS and the reason it load very slowly.
After this, I try to boot the liveUSB of various linux distro, and found some could boot while the others not:
Able to load with unusual slow boot time:
PClinuxOS (latest)
Ubuntu 8.04
Fedora (latest)
Linuxmint 8 (based on ubuntu 9)
Can't load
ubuntu 10.04 and 10.10
kubuntu 10.04
latest linuxmint
The liveUSB boot could take 1 hour. I also try the latest Puppy, Gentoo and OpenSuse liveUSB but it couldn't boot, and it likely the liveUSB problem. I made the all the liveUSB with unetbootin. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint could not boot even after I scanned the ubuntu 10.04 partition. There was no problem with the liveUSB as it would load normally on another computer. I think it is just the variant of ubuntu 10 that is not being able to boot.
I was not content on this slow boot, so I try to format the two partition of ubuntu and PClinuxOS (there are another partitions though), and installed ubuntu 8. But it also happened to boot slowly as the previous ubuntu. Then I replaced it with linuxmint 8, and the same occurred. So I try to install windows on another partition, and it boot normally.
The question is, what is happening. Why do the forced-shutdown-of-ubuntu-10.04 affect another partition, to the boot of another distro? If my HD was broken, the Windows would load very slowly too right? Yes, in SMART Data (from disk utility) it showed "few bad sector", but i think this is not related to the slow boot. The ubuntu 10.04, 10.10, kubuntu and the latest linuxmint cannot boot until this moment. I am thinking there are some informations planted on my computer, that twist it to load some distro slowly, and prevent it to load some others. But where and what? (I almost arrived to the thought that this is supernatural!)
Because of my long story up there (as I think it must be reported), the conclusion is:
1. Ubuntu 10.04 on my netbook was forced shutdown (by me)
2. It caused the partition broken
3. After fixing the partition (by scan, but I forgot the command), it took very long time to boot, but the ubuntu itself run normally
4. It also affected the boot of another distro (slow down the boot time), but Ms.Windows boot time is normal
5. It also caused ubuntu 10 (and its variant) to not be able to boot from liveCD/USB
6. It also caused me going crazy
Now im gonna format the whole HD in hope of ubuntu 10.04 (and later) could boot again, but shall it fix the problem? (as formatting the previously ubuntu 10.04 partition did not solve the problem). Or should I buy another HD (or even computer) to install natty!
I have a 4GB USB Flash Drive that I would like to install Fedora 14 Live on.
Process:
Downloaded the Fedora 14 i686 Live ISO file Used the Fedora LiveUSB Creator on my USB with the Fedora 14 ISO
I changed my BIOS on my Dell Inspiron E1505 to boot from a USB, then CD-DVD ROM, then Internal HDD Had USB inserted, then turned on computer.
Received the following message:
And then it sticks. I've found two other internet sites that have had this problem. One is in chinese, the other is in french. I know french, but the 'solution' was not clear.
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
Here is the message i get:
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
View 3 Replies View RelatedI have a Toshiba a105-s2236 laptop and am trying to install Fedora 14. Is there any way to tell Fedora not to look for the pcmcia slots on boot? My live CD is freezing at the point where it tries to probe the pcmcia socket IO port.
I tried adding the 3 to get to a console, but that fails as well. I had to add acpi=off to the kernel boot args to even get it to go this far.
Even using the nopcmcia option, it still tries to probe the socket's IO port.
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies View RelatedI have the following trouble when I try to install Fedora 10 with a USB Flash Drive created by Fedora LiveUSB 3.6.3 [url]...ator-3.6.3.zip in a HP Mini-Note 2133 Notebook.
Everything looked ok during install, restarted the PC, get the booting count down and splash screen.
After some seconds then get this:
i just installed the Debian on my old laptop. The install went fine but after that, the GRUB menu loads and freezes. I simply can't do anything. I checked menu.lst and the timeout is set to 5 but still nothing happens. It won't load. I then tried to load with the "super GRUB disk"but the same problem - as soon as it loads from the CD, it freezes and I can't do anything. Before I had Xubuntu on the same laptop but there was no Grub menu. It simply loaded. There's only 1 OS on the laptop /currently Debian/ - no windows, no other Linux.
View 14 Replies View Relatedi have recently installed linux ubuntu and set it up, i was then promted to install updates (roughly 174). i did this, however once the updates had been downloaded, they continue to install then about halfway through it freezes, nothing happens and time does not fix this problem. I have restarted the laptop and 4 options appear, including recovery menu's, i have re-installed ubuntu as what i tried from that menu did not work.
View 2 Replies View RelatedI installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
I've burnt the fedora 10 Installable Live CD on to a DVD, the initial boot/menu's works fine but after the progress bar loads the display on the next screen loaded is all out of wack bad resolution etc, I can see a mouse cursor.
View 3 Replies View RelatedI have two Lenovo laptops: One is a T410 now running on openSUSE 11.4 with KDE 4. I got my wireless, keyboard languages/layouts, upgraded firefox... The other, a V570, is currently running Ubuntu 11.4 and I'd like to install openSUSE 11.4 on it.
Here is what I did. Downloaded openSUSE-11.4-DVD-x86_64.iso from software.opensuse.org: Download openSUSE 11.4 (Direct link). md5 checksum is good (compared to checksum posted by caf4926). Burned to DVD using Brasero. Installed openSUSE on the T410 (did the media check first from the installation menu - it was ok). Install went well and system is running fine. I'm happy with it
This is the problem I'm having; tried it about 10 times now and every time it's the same. Using the same DVD, trying to install openSUSE 11.4 on the V570 machine; after turning on, it boots from the DVD and I get the following 3 lines and then the cursor just sits at the fourth and does not continue
ELILO boot: ..........
Loading kernel linux... done
Loading file initrd...done
I have recently done a clean install of Ubuntu 10.04. Since then I have had no end of trouble with Openoffice 3.2.
When I open any office app, the text on the menus is corrupted and has lines going through it. I've included some screenshot to show what I mean.
Also, sometimes when I open an Excel spreadsheet my entire system crawls to a standstill and it can take anything up to 10 minutes for it to respond again. Not even the mouse cursor will move. If I reboot the PC and open the same document it will sometimes be just fine. It is very random.
So far I have tried uninstalling and reinstalling openoffice.org from apt-get, but this hasn't fixed the problem.
My system:
OS: Ubuntu 10.04
CPU: Core 2 Duo
GPU: nForce 610i/nVidia 7050 (onboard VGA)
RAM: 2GB
I have windows 7 and ubuntu on my computer they were working fine together, so i decided to get fedora. now when i go to the boot menu on fedora it has a list that says fedora (numbers), and other. so i clicked on "other" but it says partitions were not found.
View 7 Replies View RelatedChanged the partition sizes = all ok
boot to F15 = ok
#grub-install /dev/sda = seemed ok but XP not shown
[code]....
I know this is an Ubuntu Forum (duh) but I'm having trouble booting Fedora. I have Windows 7 and Ubuntu 11.04 loaded on to my HDD and GRUB boots both of them just fine. I installed Fedora 15 on dev/sda7 (a clean partition) and I'm using the same swap for both Linux distros. I am not that new to Linux but I still need fairly detailed instructions.
My problem: Fedora does not show in the boot menu and I'm not sure how to get it there.
I've heard about something going funny when the kernel updates and something about chainloading but I'm no expert on either.
I was on version 2.6.29.6-217.2.3.fc11.x86_64 and it asked me to update so I did. When I restarted I chose this version to install and after a brief loading screen it goes to a black screen with a cursor prompt and pretty much stays there. So I go back to 2.6.29.6-217.2.3.fc11.x86_64 which boots up just fine. But after a while I get some updates that won't install because it says that Packages are not compatible:Install - Linux Kernal 2.6.30.5-43.fc11(x86_64)
ERROR with rpm_check_debug vs depsolve:
kernel-uname-r = 2.6.27.19-170.2.35.fc10.x86_64 is needed by kmod-nvidia-2.6.27.19-170.2.35.fc10.x86_64-180.29-1.fc10.1.x86_64
[code]....
I have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
View 3 Replies View RelatedI have just updated my kernel and immediately struck trouble. The kernel update is marked as security update.
When booting I get a multiple warnings " deprecated config file /etc/modprobe...", then "no root device found" followed by "boot has failed, sleeping forever"!Clearly something is amiss with this update, so figured the best thing might be to remove it and wait on a fix, but attempting to remove the kernel via the package manager would cause a whole lot of other packages to be removed as well.Instead, I edited grub.conf, commenting out all the kernel-2.6.34.7-63 lines, so that the default is now the previous kernel (2.6.34.7-61).
I am trouble trying to get vpnc to work on my laptop.
Using the same computer via Ubuntu, it works fine.
I used to use an older kernel with the cisco vpn client, but had to go through the motions of turning off cpus in order for it to work. I gave that trick a try and it does not work.
I pretty much followed the instructions from: Gentoo Linux Documentation -- Gentoo vpnc HOWTO
The machine completely locks up right after I enter my password...
I don't see anything relevant in the /var/log/messages file.
Is there another log file to look into specific to the vpnc?