OpenSUSE Install :: Box Is Being Named Automatically?
Feb 12, 2010
We have a MS Windows domain in our school. Some time ago, when I was toying with an earlier version of Opensuse, I joined a box to our domain. I am trying 11.2 now, and my box is box is being named automatically, to what I named the previous box (which is long gone). I guess this is an issue with my Windows domain controller, but I'm not sure what to do about it. The domain controller is running Windows Server 2008 Enterprise.
View 4 Replies
ADVERTISEMENT
Mar 14, 2009
Mandriva 2009, BIND 9.5.0-P2. Named will start however I'm getting the above error as well as these:
14-Mar-2009 15:45:37.084 general: error: zone 0.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.zero failed: file not found
14-Mar-2009 15:45:37.084 general: error: zone 0.0.127.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.local failed: file not found
[code].....
Named shows to be running but with the errors above I know it's not running correctly. I also copied the above dir's over to /var/lib/named/var/lib/named which is where I 'believe' it's chroot'd at, though I could be wrong since I'm unfamiliar with chroot.
View 14 Replies
View Related
Apr 1, 2011
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
View 2 Replies
View Related
Dec 14, 2009
When in YaST/System/Partitioner I try to create RAID for my second HDD which is named "sdb".
My original "sda" hdd is partitioned as follows:
dev/sda, disk type
dev/sda1, linux swap, swap, swap
dev/sda2, linux native, ext3, /
dev/sda3, linux native, ext3, /home
When trying to partition second "sdb" hdd I go to "/dev/sdb" under "Hard Disks", then create partition on "/dev/sdb" ... new partition/maximum size, press next button, do not format partition/0xFD linux raid/do not mount partition. After that "swap" partition of the whole size of disk gets created. However when trying "raid" in system/partitioner/add raid I end up with ("ERROR" there are not enough suitable unused devices to create raid).
View 4 Replies
View Related
Jan 31, 2010
I got the serious problem after update my opensuse 11.2, after update the message appeared and said restart my machine to updates take effect and after restart system doesn't boot GUI workspace it boot into text like space named "Emerald - Kernel 2.6.31.8.0.1 - desktop (tty1)".What can I do to boot my machine into GUI again?
View 4 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
Jan 14, 2010
When I boot up openSUSE 11.2, sometimes it logs me in automatically (which is the setting I have) and sometimes it doesn't. How do I figure out why this is occurring?
View 5 Replies
View Related
Apr 24, 2010
Is there a way to install automatically dependencies for rpm's?
View 1 Replies
View Related
Feb 16, 2010
Well, its been 2 days since I have had Suse 11.2 on this laptop. (Fujitsu-Siemens Amilo M7400 1.6 GHz Centrino, 60GB HDD)Everything seems to work in order, but at certain times, the computer will just log out on its own, without any reason. It gives no error when it does this, so there is no way for me to determine what the cause is. As far as the rest of the OS goes, everything seems perfectly fine, except for the automatic log out the computer does. It just annoys me when the computer logs out by itself sometimes because then I am lost on where I was before, since nothing gets saved when it does this. It makes things really challenging when you are typing something as I am now and then the computer just logs itself out on its own, leaving me with nothing because it does not save anything. And if so, what are the repair steps to this issue??
View 9 Replies
View Related
Nov 21, 2010
Completely erased my windows finally to load up opensuse 11.3. It's amazing!!Only one problem. I can use a usb stick and it automatically shows up. When I plug in my microSD into my usb adapter I get an error message. 've seen lots of posts about this error message but everything I've read has been way over my head.
View 4 Replies
View Related
Feb 18, 2010
I am using OpenSuse 11.1. When the computer boots, I come to the welcome screen and then I have the screen with the users on the left hand side. One user is selected by default, and the space for the password is in blank. If I do not enter the password immediately, black dots start to appear in the password box as if there was somebody typing a password.
View 5 Replies
View Related
Mar 1, 2010
After the install on the hd I had to modify manually the start option otherwise I wouldn't. I found out in the option that I have to give: pci=noacpi and the start will go on. My question is, how to do this automatically, I mean modifying before every boot would be annoying.
View 6 Replies
View Related
Mar 31, 2010
If I click on the shutdown bottom (in my lower panel) I get an new window to choose if I really want to shut down or restart or suspend or hibernate. Under that alternatives there is an text that says: "[...] The system will automatically shut down in 60 seconds." Why is the text "60" not running down like a countdown? Can I set another (shorter) time for the automatic shutdown (10 seconds)? If so, where? Or shut I just make another bottom to shut down immediately?
I use (normally) OpenSuse/SUSE Linux
Release 11.1
Kernel Linux 2.6.27.45-0.1-pae
Gnome 2.24.1
View 9 Replies
View Related
Apr 10, 2010
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
View 9 Replies
View Related
Jan 29, 2011
I want to automatically run a script once the system has entered runlevel 3 during boot (the script requires network access). I know about /etc/init.d/boot.local but it's my understanding it's triggered in runlevel 1. I also know about init.d scripts but they seem a little daunting.
View 3 Replies
View Related
Nov 29, 2009
I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
View 2 Replies
View Related
Jun 29, 2010
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
View 9 Replies
View Related
Sep 26, 2010
I just installed openSuse11.3 on my desktop, but when I switch on my pc, windows starts aumatically. I can run openSuse only if I insert installation cd, select BOOT FORM HARD DISK and then Grub appears...I have a problem also with screen resolution, I installed nVidia drivers, but the maximum resolution is 1024X768...
View 3 Replies
View Related
Jun 8, 2011
On Ubuntu, the local user is automatically added the xhost list when logging in (via a script in /etc/X11/Xsession.d).
Is there a way to enable this in OpenSUSE?
(My original problem is that I cannot interact with a running X session when loggin in via SSH, since newer GDM versions don't create $HOME/.Xauthority any longer.)
View 9 Replies
View Related
Jan 18, 2010
I am running opensuse 11.0 on Intel Quad computer. A month ago I have installed DNS service on it.
Since then I have a following problem - sometimes named starts eating 200% of CPU and that causes LAN to hang down. Everything goes normal after named restart.
View 9 Replies
View Related
Dec 25, 2010
I want to learn to program by python 3 so I install eric5. I can't find it on opensuse repo so i must install it and it's dependence package from tarball. Everything seem to be normal till I try to run it. Nothing happen so I run it from terminal and get error
Code:
Traceback (most recent call last):
File "/usr/local/lib/python3.1/site-packages/eric5/eric5.py", line 56, in <module>
from E5Gui.E5SingleApplication import E5SingleApplicationClient
File "/usr/local/lib/python3.1/site-packages/eric5/E5Gui/E5SingleApplication.py", line 14, in <module>
from Utilities.SingleApplication import SingleApplicationClient, SingleApplicationServer
[Code]...
View 2 Replies
View Related
Apr 2, 2011
Recently installed a new distro OpenSUSE 11.4 x86_64. I installed it in a minimal configuration for my needs, on after installing a minimal system installed hypervisor Xen 4.0.2. He also set for a lot of dependencies, and utilities. On one of them I have a problem. Trying to run a utility to create a virtual machine "vm-install", but crashes the next kind of error:
Code:
Traceback (most recent call last):
File "/usr/bin/vm-install", line 30, in <module>
import vminstall.job
File "/usr/lib/python2.7/site-packages/vminstall/job.py", line 28, in <module>
[code]....
View 1 Replies
View Related
Dec 8, 2010
Under the settings for a specific zone is it possible using the 'Automatically Generate Records From Zone' option to update from two other different zones? Also, the 'Automatically Generate Records......' option, I can't seem to find where it exists in named.conf or other file. I have it checked in Yast but I can't find that option reflected in a config file - which I would assume it would have to be.... somewhere.
View 6 Replies
View Related
Apr 10, 2011
how do I remove a double file like " New File" look through everything I own no explantion.
View 3 Replies
View Related
Feb 14, 2011
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
View 1 Replies
View Related
Oct 28, 2009
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies
View Related
Jun 5, 2011
i downloaded a widget named yet another netspeed monitor.it is not working.it says please see the following image
View 4 Replies
View Related
Sep 16, 2010
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
View 2 Replies
View Related
Nov 19, 2010
I saw it mentioned in the Dec-2010 issue of Linuxjournal, but I can't get it to run, either from the rpm in the build service, nor from the tarball on the whyteboard website, nor from the rpm on the whyteboard web site. In all cases I get an error something like:
Code:
oldcpu@hal2009:~> python whyteboard.py
Traceback (most recent call last):
File "whyteboard.py", line 46, in <module>
import wx
ImportError: No module named wx
[code]....
View 7 Replies
View Related
Aug 19, 2010
Since there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
View 9 Replies
View Related
