OpenSUSE Network :: Named - Auto Gen Records From Two Zones?
Dec 8, 2010
Under the settings for a specific zone is it possible using the 'Automatically Generate Records From Zone' option to update from two other different zones? Also, the 'Automatically Generate Records......' option, I can't seem to find where it exists in named.conf or other file. I have it checked in Yast but I can't find that option reflected in a config file - which I would assume it would have to be.... somewhere.
View 6 Replies
ADVERTISEMENT
Jan 18, 2010
I am running opensuse 11.0 on Intel Quad computer. A month ago I have installed DNS service on it.
Since then I have a following problem - sometimes named starts eating 200% of CPU and that causes LAN to hang down. Everything goes normal after named restart.
View 9 Replies
View Related
Apr 10, 2011
how do I remove a double file like " New File" look through everything I own no explantion.
View 3 Replies
View Related
Sep 16, 2010
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
View 2 Replies
View Related
Mar 14, 2009
Mandriva 2009, BIND 9.5.0-P2. Named will start however I'm getting the above error as well as these:
14-Mar-2009 15:45:37.084 general: error: zone 0.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.zero failed: file not found
14-Mar-2009 15:45:37.084 general: error: zone 0.0.127.in-addr.arpa/IN: loading from master file /var/lib/named/var/named/reverse/named.local failed: file not found
[code].....
Named shows to be running but with the errors above I know it's not running correctly. I also copied the above dir's over to /var/lib/named/var/lib/named which is where I 'believe' it's chroot'd at, though I could be wrong since I'm unfamiliar with chroot.
View 14 Replies
View Related
Mar 13, 2011
While in Internet my connection seem to be off after some time when I stop browsing. I connect via DSL modem and I turned off network manager control over my DSL connection. I set up my connection on boot. Where can I fix it? Or where can I see the conf files for network connection setup?
View 2 Replies
View Related
Apr 13, 2011
I want to set my desktop IP address to always be 192.168.1.2. The NetworkManager connects to the network automatically and the IP address is assigned randomly. I can set up another connection in NetworkManager and always change over. But is there any way to make the default eth0 interface to be permanently set to a certain address (using NetworkManager, not ifup)?
View 9 Replies
View Related
Sep 9, 2011
I have an install of OpenSUSE (11.4) and I'm running vsftp. We have several companies already running scripts on their end to pull all the files out of a mounted Windows share, then delete the contents of that folder. What I'm needing to do is after the files are dropped on a mounted Windows share, I need to somehow connect to an FTP server at another location, send all the files from that Windows share, and delete all the contents from that share. And on top of that, I would like to have this happen everytime a file is placed in the folder or at regular 2 hour intervals or something like that. Can someone point me in the right direction to learn how to do this. I'm fairly familiar with OpenSUSE but this is beyond my knowledge, for now.
View 5 Replies
View Related
Oct 1, 2010
I've been experiencing one issue in my opensuse 11.3 KDE, the thing is when leave my pc downloading a file, it disconnects after a period of time, I don't know when exactly. I connect to internet at boot time via DSL modem, when I was setting up my connection I noticed, that there is an option "idle-timeout" I set it to zero "0", I know that my pc donwloads all the time and speed do not drop, why then it disconnects?, it disconnects even with higher numbers of idle-timeout. It happened on the other laptop too, so I need every time to "rcnetwork restart" to get it back working
View 9 Replies
View Related
Jun 15, 2011
I'm looking for a program that will digitally display the time in three different cities - all showing at once. I don't care if it is a panel applet or stand-alone. I'm using Suse 11.3 and Gnome.
View 5 Replies
View Related
Feb 11, 2010
I'm running OpenSuse 11.2. I've got it running mostly the way I want and it connects to my wireless internet no problem. I have a external hard-drive on my Windows machine setup as a share folder. I can mount the drive with:
Code:
mount //10.13.23.2/D /home/james/mnt/win However when I do mount like this it doesn't give my any read/write privliages on the drive. Also on a slightly different issue but still mounting related I have my HDD partitioned into four main drives (not including swap etc). They are my Windows drive, a seperate storage partition formatted for Windows, my main linux drive and a seperate parition for linux storage.
I want to have my Windows drive, my Windows storage drive and my linux storage drive all mounted on boot. I tried adding these to fstab, and they mount fine but again I have no read/write permissions. My fstab looks like this:
Code:
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part5 swap swap defaults 0 0
/dev/disk/by-id/ata-WDC_WD2500BEVT-35ZCT0_WD-WXE908AE4273-part6 / ext4
[code]....
Lastly I would like my Windows Share drive to mount on boot but I have been advised that I would need to write a shell script for this, to do network checks as obviously I won't always be connecting to my network.
View 6 Replies
View Related
Apr 1, 2011
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
View 2 Replies
View Related
Jun 24, 2010
How to create and use named pipe on linux network.ie
client - my linux machine
server - my fren's linux machine
how to communicate between these two using named pipe created in C? do u have any similar code snippet written in C??
i got one server client application,its working fine on my machine.So i want enhance that code for networking.so help in this...
View 6 Replies
View Related
Jun 24, 2010
I would like a program that records my desktop activity as a video file. Do you know any nice program to do that? Moreover it would be nice afterward to insert this video the openoffice or microsoft's powerpoint. Do you know what is the "best" video format that guarantees the biggest interoperability (the ability the video to play in different platforms).
View 6 Replies
View Related
Mar 22, 2011
In locating me a good document for configuring zones in Redhat 5 and RHEL 6
View 3 Replies
View Related
Feb 15, 2010
Don't worry, I know - that title probably makes this question seem way more complicated than it actually is. Here's the situation: I have a server running SLES10 with a samba share set up on it. I created a username in Samba and Linux for myself, can access the share, permissions are fine, yadda yadda. Now I want to give about 100 more people access to it.
I have active directory running which users log into and I'd like them to be able to use their active directory passwords to authenticate to the share, rather than have me create 100 individual Samba/Linux accounts. In the future the AD server will be changing over to server 2008 but I'll cross that bridge when I get there. It would be equally effective if I could pull AD passwords from AD and "auto-create" the associated Linux/Samba users. Any ideas or could someone point in the right direction?
View 5 Replies
View Related
Jul 23, 2010
why but on one of my boxes I am having trouble adding a new zone with the BIND Configuration GUI. When I click New->Zone, it'd pop up a long form for me to fill out various things like .....
Cache Time To Live
Authoritative Name Server
Responsible Person E-mail
etc
I notice that on the working box, it'd populate the output of the "hostname" command onto the "Authoritative Name Server" field. However, on the box that doesn't allow me to add new zones, it uses something like localhost.
View 6 Replies
View Related
Jul 1, 2010
I recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
View 5 Replies
View Related
Oct 28, 2010
I'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
View 9 Replies
View Related
Aug 13, 2011
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies
View Related
Feb 12, 2010
We have a MS Windows domain in our school. Some time ago, when I was toying with an earlier version of Opensuse, I joined a box to our domain. I am trying 11.2 now, and my box is box is being named automatically, to what I named the previous box (which is long gone). I guess this is an issue with my Windows domain controller, but I'm not sure what to do about it. The domain controller is running Windows Server 2008 Enterprise.
View 4 Replies
View Related
Dec 25, 2010
I want to learn to program by python 3 so I install eric5. I can't find it on opensuse repo so i must install it and it's dependence package from tarball. Everything seem to be normal till I try to run it. Nothing happen so I run it from terminal and get error
Code:
Traceback (most recent call last):
File "/usr/local/lib/python3.1/site-packages/eric5/eric5.py", line 56, in <module>
from E5Gui.E5SingleApplication import E5SingleApplicationClient
File "/usr/local/lib/python3.1/site-packages/eric5/E5Gui/E5SingleApplication.py", line 14, in <module>
from Utilities.SingleApplication import SingleApplicationClient, SingleApplicationServer
[Code]...
View 2 Replies
View Related
Apr 2, 2011
Recently installed a new distro OpenSUSE 11.4 x86_64. I installed it in a minimal configuration for my needs, on after installing a minimal system installed hypervisor Xen 4.0.2. He also set for a lot of dependencies, and utilities. On one of them I have a problem. Trying to run a utility to create a virtual machine "vm-install", but crashes the next kind of error:
Code:
Traceback (most recent call last):
File "/usr/bin/vm-install", line 30, in <module>
import vminstall.job
File "/usr/lib/python2.7/site-packages/vminstall/job.py", line 28, in <module>
[code]....
View 1 Replies
View Related
Oct 28, 2009
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies
View Related
Nov 4, 2010
As i undertsand - out of 1GB of the virtual Address space for Kernel from 3GB to 4GB of the process address space, Kernel image (code, data, bss, stack, heap) resides staring @0x0 address. Vmalloc area starts either at the end of Physical ram size or at 896M. This 896M cap is mandated to ensure that minimum of 128MB is reserved as vmalloc_reserve for vmalloc,kmap etc.
Is the understanding correct? Now trying to map Physical Zones into this 1GB address space
Initial 16MB is mapped to ZONE_DMA
16MB - 896MB is mapped to ZONE_NORMAL
896MB - 1024MB is mapped to ZONE_HIGHMEM
Does this mean that Kernel image is residing in ZONE_DMA area? Any call to vmalloc() in kernel code will return address beyond 896M? insmod of any LKM will internally invoke vmalloc() to obtain contiguous area - where will this code physically located along with rest of kernel code in ZONE_DMA or in ZONE_HIGHMEM?
View 1 Replies
View Related
Jun 5, 2011
i downloaded a widget named yet another netspeed monitor.it is not working.it says please see the following image
View 4 Replies
View Related
Sep 3, 2011
I just reinstalled opensuse 11.4 on a lenovo ideapad. The install went well and afterwards I was installing other packages. In the midst of this I started getting a error both from the gui software management package and zypper.(I tried zypper to see what would happen). I thought at first a simple refresh of the repos or a reboot would probably solve this but it did not.All attempts to do any software manage failsnow.The basic error is ( tail of a long list from zypper)error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Requireversion index error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found error: error(-30987) getting "" records from Provideversion index from a zypper update and something about the same from the gui. How can I solve this?
View 5 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
Mar 24, 2010
i tried to install banshee media player using zypper but it gives me this problem
[Code]...
Second problem my cd writer is kinda out of order so i followed this guide (Live USB stick - openSUSE) to make a live usb stick to try out other distros...... everything went well....dd wrote everything properly.....but when i try to boot, it says thats it is a non-system disk and says to replace it strike again....so basically its not working.....
i think i followed all the instructions in the guide properly....but still i am pasting it over here (the drive was given as sdb...i checked using ls -l) umount /dev/sdb dd if=/home/arkadeep/LinuxMint-8.iso of=/dev/sdb bs=4M;sync i used linuxmint..... yeah so dd writes everything and the size is also correct. so now i can't figure out what to do...
View 5 Replies
View Related
Jan 25, 2011
During install, I chose to not install ANY boot records, fearing overwriting my Windows 7 MBR. Now I know otherwise, but to save a couple hours of install, please tell me:How can I install openSUSE boot after-the-fact?I cannot boot into openSUSE.
View 9 Replies
View Related
