OpenSUSE Install :: NFS Works But Cannot Start At Boot Automatically?
Apr 10, 2010
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
View 9 Replies
ADVERTISEMENT
Nov 29, 2009
I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
View 2 Replies
View Related
Jul 24, 2011
I have a 32-bit openSUSE 11.4 (2.6.37.6-0.5-default) installation with a
WNBA3100v2 wireless USB card and a 100Base-TX NIC running on a Dell 4700c:
Code:
BCM4401-B0 100Base-TX (Not connected)
MAC : YY:YY:YY:YY:YY:YY
BusID : 0000:04:07.0
Device Name: eth0
[Code].....
View 9 Replies
View Related
Mar 1, 2010
After the install on the hd I had to modify manually the start option otherwise I wouldn't. I found out in the option that I have to give: pci=noacpi and the start will go on. My question is, how to do this automatically, I mean modifying before every boot would be annoying.
View 6 Replies
View Related
Jan 29, 2011
I want to automatically run a script once the system has entered runlevel 3 during boot (the script requires network access). I know about /etc/init.d/boot.local but it's my understanding it's triggered in runlevel 1. I also know about init.d scripts but they seem a little daunting.
View 3 Replies
View Related
Jul 31, 2010
The situation is too strange to be well summarized in a title-topic. I have performed the upgrade from .2 to .3 editing the repos and launching zypper dup.
The boot loader's choises are:
1)openSUSE 11.3 - 2.6.34-12 (default)
kernel image: /boot/vmlinuz-2.6.34-12-default
ram: /boot/initrd-2.6.34-12-default
root: /dev/disk/by-id/ata-Hitachi_HTS541680J9SA00_SB2204SGEZ91VE-part1
parameters: resume=/dev/disk/by-id/ata-Hitachi_HTS541680J9SA00_SB2204SGEZ91VE-part2 splash=silent quiet showopts
[Code]...
View 3 Replies
View Related
Jun 29, 2010
I installed opensuse 11.2 today on my external hard drive and everything is running great, but I want to see if I can make a modification to the way my computer boots. I share this computer with others and they are not going to be happy to have to wait for the boot menu to start when they turn on the computer in order to choose which OS to run (Especially since if they do not make a choice it auto runs opensuse after a few seconds).
What I would like is if opensuse can be "out of sight, out of mind" and only load when I put in the live cd and then choose to boot from my external...... is it possible to do this?I am not a computer wizard and do not work in the industry.
View 9 Replies
View Related
May 2, 2011
I've got this really huge problem, which I really want to solve, because otherwise I might even switch back to ubuntu. So here we go. Yesterday, I had a problem with mounting nfts hard drives and solved (you guys solved it actually) it by adding ntfs to the /etc/filesystems file. (I doubt, that it has anything to with that, but it might, so I will just tell you everything I did) I added an ATI driver repository as well, which is probably the key to this problem.(or at least something with drivers) --> not sure if I installed anything
So however, the problem is now, that the screen tells me, the signal would die just before the log in screen appears. ("No signal" --> screen goes to standby --> can't wake it up again--> no opensuse for me) I'm now running the system in some sort of safe mode and it works, but I think, that it is using my on board graphic card and not the actual "radeon hd 5600", which provides much better quality. just looked it up, yes it is using the crappy one (on board) So here's the question: First of all why does this error occur(worked fine before) and secondly how can I fix it?
View 9 Replies
View Related
Jul 6, 2011
In summary, after updating from 11.2 through 11.3 to 11.4, normal boot works fine, failsafe mode hangs with two fatal errors - "Module atiixp not found" and "Module ide-pci-generic not found". i would like to fix this a) so I have a recovery position b) so I learn a little more. As 11.2 has gone out of support I decided to embark on the upgrades to 11.3 then 11.4 using the zypper method described on this site. I think failsafe boot worked ok with the original 11.2 install, but I never had to use it in anger, so I can't be 100% sure. I did not test failsafe in 11.3, just checked that the typical cd set of applications seemed ok before proceeding with the upgrade to 11.4.
I have an AMD processor, chip set and an ATI 3800 series graphics card, so I added the ATI repositories for 11.3 and 11.4 as i worked through the upgrades. At 11.4 there were some graphics glitches during normal and failsafe boot which were successfully fixed by adding "nomodeset" to both boot options. Normal boot works fine but failsafe boot hangs with the error messages above. Searching for failsafe boot errors is unhelpful since, in all cases I have checked, normal boot fails too. I did try removing "Xfailsafe" from the failsafe options which produced no change.
I am guessing that, in failsafe mode, the ATI drivers are not loaded into the kernel and the idea is to default to some safer drivers which, in my case, are not present for some reason. However, there seems to be little information on the origin or purposes of atiixp so I don't know how to go about fixing this. I have not really researched the generic pci driver issue, but I am guessing that this is a fall back when the expected atiixp is missing.
View 8 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Dec 6, 2009
have search the web for answer and there are some suggestion. tried those suggestion but was not successful.appreciate if any one can help to resolve this? I'm running fedora 11 and using the NXserver for remote access
View 7 Replies
View Related
Mar 4, 2010
When I go to 'Places' on my panel, my windows drives are listed. I can click on one, it then asks me for password, then it puts a hard drive icon on my desktop. This is excellent.They are listed as '200 GB Filesystem' etc.My only problem, is how to make these icons stay after I shut down. I don't want to do this every time I boot up.
View 4 Replies
View Related
Jul 16, 2011
My son dropped my laptop and broke the screen so I decided to use it as a project.
1 I managed to install kubuntu on it unfortunately it was the 64bit version not the 34bit one. The problem I'm having is that the external monitor only works after kubuntu boots up so I can not view the set-up boot options. What I want to do is put win 7 on it as I have a mate that needs a computer and he is pretty computer illiterate.
2:It will boot into G-parted and I have made a ntfs partition for the win 7 OS to go into. I have another duel boot desktop so followed what I did with that.The problem is that as I cannot see the initial start up screen and can get it to boot from the win7 boot disc that I have(this is a working cd I have used before) Is there a way I can get Kubuntu to automatically go into boot from cd on start up etc?
View 8 Replies
View Related
Apr 13, 2010
I have a Centos 5.4 server, I would like to know how to start NFS automtically when the server boots up so that I won't have to manually start the service after the server boots up. where and how do I accomplish this?
View 3 Replies
View Related
Feb 14, 2011
Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-
1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).
2. sudo ndiswrapper -i netwpn111.inf
3. sudo ndiswrapper -m
4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).
2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.
View 1 Replies
View Related
Jul 4, 2011
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
View 3 Replies
View Related
Jul 18, 2011
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
View 9 Replies
View Related
Aug 5, 2010
I'm wondering how I start it automatically when I boot up the ubuntu 10.04? especially, when I created the user "postgres", I set a password to it. every time I issued "su - postgres" command, I need to give it a password.
View 2 Replies
View Related
Mar 22, 2011
I have configured heartbeat+DRBD on a SLES10 SP3 cluster and that's working fine except when both nodes are down and I turn on only one node. When this happens, the heartbeat don't starts automatically (the service status says it's unused, so the services, IP address and partition don't start automatically too).
I can turn on the heartbeat manually (service heartbeat start) and get the services, ip address and partition initialized too, but I'd like to make it starts automatically because it's possible to have one node broken and the person that will turn on the other node can forget to manually starts the service.
-When the heartbeat is unused on the first node and I turn on the second node, the heartbeat on the first node starts automatically and everything is fine.
-The command "chkconfig heartbeat on" was executed.
View 6 Replies
View Related
Feb 19, 2011
i use ubuntu 10.10 installed in wubi on my girlfriend's machine.in order to connect to the internet i had to install a dialer script and then i need to type in terminal: sudo cable-start and then password BUT i wish this to happen automatically when booting the machine.i am sure that it is possible, but have no clue how to do it.
View 3 Replies
View Related
Sep 1, 2011
I've recently upgraded to Natty (11.04).The problem that is now occurring, and reoccurring, is like this:- Computer boots, but hangs on a purple screen (nothing on it). Nothing happens, after 15 minutes or so I give up waiting and hard reset.- Boot via Grub (holding shift) into recovery-mode: works fine, but I want the GUI, so I reboot.- After reboot the system hangs again, as mentioned before.- Hard reset again, and booting a previous kernel (2.6.32.8 ): works fine!- Restart again, boots in most recent kernel (2.6.38.10): works fine now.- Try to shutdown/restart again, problem re-occurs every time. So I use the workaround with the extra startup with the older kernel again.and finally typing this.
View 1 Replies
View Related
Apr 9, 2010
I wonder how could I start my ruby on rails mongrel_cluster at the start of my openSUSE 11.0 Server and I don't have a GUI. So the shell solution would be good.
View 1 Replies
View Related
Apr 12, 2010
I need to start VirtualBox on my server at boot time as "virtual" user, not root.
* What is the command line to do so? Virtual box command is "VBoxManage startvm xxx" but for "virtual" user?
* I think of setting this line in /etc/init.d/boot.local, but I wonder if this is not too early in the boot process?
of course I need all this to be done on non-interactive way, automatically (from the command line, I do it easily), including passwds
View 4 Replies
View Related
May 5, 2010
I have just done a fresh network install on SUSE on a new HP Proliant ML115 server. The install seemed to go OK, but on rebooting after the install I get a shell logon/prompt -- no GUI. Have tried reinstalling with the same result. If I try to run startkde I get a message that says "$DISPLAY is not set or cannot connect to the X server."
How do I resolve this?
View 3 Replies
View Related
Jun 14, 2010
i am getting this complaint when i try to automate the loading of a script taken from an ubuntu person:
/etc/init.d/automount: line 23: /lib/init/vars.sh: No such file or directory. I can't seem to find the equivalent in opensuse
View 3 Replies
View Related
May 25, 2011
I have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies
View Related
Aug 20, 2010
I have just installed OPENSUSE 11.3 from a CD to a computer running WIN XP. The installation completed and I got to a desktop. I then shut down. When I restarted the computer with the installation CD removed from the drive, I got the message "missing operating system". I ran the installation again, and have left it running. As near as I can tell, the WIN Partition is still intact, but I'm afraid to shut it down for fear I once again will not be able to access either system.
View 4 Replies
View Related
Aug 23, 2010
I am completely fed up trying to do it. I had no problems with 11.0. It refuses to start up during boot like tor. I added tor to the kde start menu and it works just fine after boot. Privoxy refuses to start up during boot. I have to go into SU mode in terminal, then it works. I need to be able to start Privoxy the same way. I tried everything from chown / chmod commands, and it made no difference. I have it set for 777, and my name along with root. I also added the group privoxy to my user ID. I need the computer to disregard that it is a root program.
View 2 Replies
View Related
Nov 13, 2010
My laptop is a Core 2 Centrino and i installed OpenSUSE 11.3 i586 on it recently. I tried to install the graphic card's driver using this instruction:ATI Installer HOWTO for openSUSE usersafter installation was done, i restarted the system but during the boot, where the openSUSE appears, the screen went black and nothing happened afterward untill i turned of the system manually.i tried again and same result, so i logged in with failsafe and un-installed those packages, now the system boots successfully, but it boots to the terminal instead of the desktop. i might have removed the X server package or something important.now that i have access to terminal and i can log in, i thought i can do something with it and solve it this way rather than re-installing the whole OS.he graphic card is :ATI Mobility Radeon HD 4570, if anyone knows how to the driver for this card, please let me know how to.
View 9 Replies
View Related
Mar 30, 2011
So I have looked everywhere, I see the ssh script in /etc/init.d everything seems to check out with chkconfig (shows 3 and 5). But for some reason my SSHD server doesn't start on boot till I run either rcsshd start or /etc/init.d/ssh start.
View 7 Replies
View Related
