I am using OpenSuse 11.1. When the computer boots, I come to the welcome screen and then I have the screen with the users on the left hand side. One user is selected by default, and the space for the password is in blank. If I do not enter the password immediately, black dots start to appear in the password box as if there was somebody typing a password.
View 5 Replies
Trying to install Ubuntu 10.04 desktop (amd64) on this brand new system:
I connected the Dell ST2410 24" Full HD Widescreen LCD to the HDMI port on the ATI card and Windows 7 boots up just fine.
So then I put in the "ubuntu-10.04-desktop-amd64.iso" CD in drive and reboot the system. I see the Ubuntu logo with the dots for a while and then the LCD goes black. The LCD reports that there is no signal from the system. The power light in front of the LCD goes from white to amber. The keyboard stops responding.
I power off everything, remove the Ubuntu CD and reboot the system and it works fine again with Windows 7.
The CD has no problems. At boot time, I checked it for defects and it reports no errors. At boot time, I used this same CD to check the system for memory errors. No memory errors. I used the same CD to install Ubuntu on other systems and had no problems.
The 16X DVDRW Drive has no problems. In Windows 7 it can play CDs and DVDs.
I recently received a HP Pavilion dv9000 that the previous owner swore had some issues with it. I'm not so sure it had issues, but that's another story. Anyways, I downloaded Unbuntu 10.10 and burned it to a disk. The first time I booted up the machine I told it I wanted to try Ubuntu. I then left the machine and came back in 20min or so and it looked like it had successfully booted. However I quickly realized the screen was frozen. So I turned off the machine and decided I'd try again a few days later. Today I booted up the machine and I get to a black screen with Ubuntu on it with five dots below the wording. It freezes on this screen. I've rebooted several times but I keep getting to the same screen before it freezes.
View 1 Replies View Relatedhello i am trying to change my password, but when i type in the new password i get this:"The password is longer than 8 characters. On some systems, this can cause problems. You can truncate the password to 8 characters, or leave it as it is."my question is what kind of problem could i get and how can i change so i have to log in every time i start the computer?
View 9 Replies View RelatedUbuntu 8.4 Just installed Truecrypt yesterday. Would like to be able to start Truecrypt automatically and use the same password as my login password.
View 1 Replies View RelatedI work on a product that have to start automatically an application. Running Opensuse 11.2 So in the inittab I have : 1:2345:once:/root/Velox/VeloxBoot.sh 2:2345:respawn:/sbin/mingetty tty2
In the VeloxBoot.sh, if I don't press any key, my application starts after a timeout. If the user presses a key I want to have a login prompt. Unfortunately, if I start /bin/login, I have a prompt with login, but once I enter my login, it does not ask for a password and it says wrong password
I cannot install the newest Ubuntu, 64 or 32-bit. On the amd release, the intro with the five red dots appears, then it goes into a white background with multiple light-purple random lines, and quits there. On the 32-bit release, the purple screen appears with no menu, with an error message.My system has an AMD64 processor, two hard disks: one for Windows, one for Linux. I used to have Ubuntu Hardy Heron on it (not the LTS version), so I erased the drive.
View 2 Replies View RelatedToday, I turn on my computer, and put a CD, as then I click the install, then waiting like Dot dot loading, what's does mean?
View 14 Replies View RelatedI have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies View RelatedI guess it is the setting of the Opensuse, as i have tried different players, e.g SMPlayer, VLC adn Xine, all show blue dots on the player's screen.
View 3 Replies View RelatedI downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
View 7 Replies View RelatedInstalled kernel-rt-2.6.31-6.1.i586.rpm for low latency studio recordingreboot then immediately black screen.Ctrl+Alt+F1 not working Ctrl+Backspace not workingcannot get in console modeGraphic adapter : Geforce 6600Opensuse 11.3
View 9 Replies View RelatedI just installed 11.4 with KDE on a COMPAQ EVO D510 SFF. The install seemed to go smoothly but after the boot completes I have only a white cursor on a black screen. The cursor moves with the mouse.At the boot menu, I can select alternatively "failsafe" and that takes me (after login) to the Linux command line and I don't know how to work that very well
View 9 Replies View RelatedWhen I boot up openSUSE 11.2, sometimes it logs me in automatically (which is the setting I have) and sometimes it doesn't. How do I figure out why this is occurring?
View 5 Replies View RelatedWe have a MS Windows domain in our school. Some time ago, when I was toying with an earlier version of Opensuse, I joined a box to our domain. I am trying 11.2 now, and my box is box is being named automatically, to what I named the previous box (which is long gone). I guess this is an issue with my Windows domain controller, but I'm not sure what to do about it. The domain controller is running Windows Server 2008 Enterprise.
View 4 Replies View RelatedIs there a way to install automatically dependencies for rpm's?
View 1 Replies View RelatedWell, its been 2 days since I have had Suse 11.2 on this laptop. (Fujitsu-Siemens Amilo M7400 1.6 GHz Centrino, 60GB HDD)Everything seems to work in order, but at certain times, the computer will just log out on its own, without any reason. It gives no error when it does this, so there is no way for me to determine what the cause is. As far as the rest of the OS goes, everything seems perfectly fine, except for the automatic log out the computer does. It just annoys me when the computer logs out by itself sometimes because then I am lost on where I was before, since nothing gets saved when it does this. It makes things really challenging when you are typing something as I am now and then the computer just logs itself out on its own, leaving me with nothing because it does not save anything. And if so, what are the repair steps to this issue??
View 9 Replies View RelatedCompletely erased my windows finally to load up opensuse 11.3. It's amazing!!Only one problem. I can use a usb stick and it automatically shows up. When I plug in my microSD into my usb adapter I get an error message. 've seen lots of posts about this error message but everything I've read has been way over my head.
View 4 Replies View RelatedI've got a problem with my openSuse 11.3 for a few days. This is my first Linux so i'm kind of rookie.OK, let's start.I installed it something like 1 month ago and everything looks good until now. When I turn on my PC and try to login (deskop mode) login bar goes from 30% to 50% and then appears a black screen, nothing more, just deep black (cannot type anything etc.) I use GRUB - Windows, opensuse deskop mode and failsafe mode. Failsafe mode works good, but I have no idea what should I do because I didn't change anything. I even done a reinstall of OpenSuse and after one day I've got the same black screen.Someting wrong with grapfic card drivers? (ati 4850, downloaded from ati page, works good for 1 month) maybe some kind of new update which was installed automatically?
View 3 Replies View RelatedActually when I am working on internet.. The computer closed all programs and a black screen appeared asking me login : and Password after it... later It showed me that there are some update packages ... I didn't know how to get out of that except to restart ...
View 6 Replies View RelatedMy VX3000 webcam seems to be recognized by skype and kopete, however the image is terrible (green screen with some colour-ful dots at the top).
Here is some output that might shed some light on the issue:
This is what I have installed
Code:
Which seems to be received well on startup:
Code:
However the output at runtime of Kopete might give a hint to the problem:
Code:
After the install on the hd I had to modify manually the start option otherwise I wouldn't. I found out in the option that I have to give: pci=noacpi and the start will go on. My question is, how to do this automatically, I mean modifying before every boot would be annoying.
View 6 Replies View RelatedIf I click on the shutdown bottom (in my lower panel) I get an new window to choose if I really want to shut down or restart or suspend or hibernate. Under that alternatives there is an text that says: "[...] The system will automatically shut down in 60 seconds." Why is the text "60" not running down like a countdown? Can I set another (shorter) time for the automatic shutdown (10 seconds)? If so, where? Or shut I just make another bottom to shut down immediately?
I use (normally) OpenSuse/SUSE Linux
Release 11.1
Kernel Linux 2.6.27.45-0.1-pae
Gnome 2.24.1
I am using SUSE 11.2. And I am really baffled with a strange NFS problem.I have set up the fstab on the client and exports on the server correctly, because if I manually run # /etc/init.d/nfs startStarting NFS client services: sm-notify doneI can see and use the NFS partition perfectly, there is no problem at all.But nfs cannot successfully start at boot. In yast, I have enabled nfs in "System Services (Runlevel)" at runlevel 3 and 5. So it should run automatically, but I always get the following error message:
/var/log/message:
Apr 10 20:07:56 hubble kernel: [ 33.654768] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[code]....
I want to automatically run a script once the system has entered runlevel 3 during boot (the script requires network access). I know about /etc/init.d/boot.local but it's my understanding it's triggered in runlevel 1. I also know about init.d scripts but they seem a little daunting.
View 3 Replies View RelatedWhen I installed the OS, I wasn't prompted to set the root password. Is this a bug, or did my install hose up?
View 4 Replies View RelatedI'm running openSUSE 11.2 on a Thinkpad T61p with nvidia graphics. I'm running the proprietary nvidia driver.The battery ran very low and the computer suspended itself. After I woke it up, the desktop is completely black.After troubleshooting as much as I could, I did ctrl-alt-backspace, which brought me to a normal (non-black) login screen. However, as soon as I logged in, I was back to a completely black screen. But the system is operating.I rebooted the computer (warm reboot as well as cold restart) and each time the video is normal until I get to the desktop and all I get it black.Everything was normal until the pm suspend.Suspend has never worked exactly right, so I don't normally use it. But in this case, it used itself Next step: I logged in to console mode and looked at the logs. The only messages of interest seem to be in Xorg.0.log I found a couple error messages that might be of interest:
(II) LoadModule: "nouveau"
(WW) Warning, couldn't open module nouveau
(II) UnloadModule: "nouveau"
[code]....
I'm on a JFK assassination binge right now
Every ten minutes or so the screen goes blank and I have to hit the keyboard or wiggle the mouse to bring it back to life
This isn't hibernation...for the audio still works
I've looked around the control center...right clicked the desktop and looked at options there
I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.
On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot
(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.
After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:
GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see
root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.
I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.
PS: You can tell I work IT with the uber amount of details I put into this
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums
after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok.
Now I cannot use the PC even in failsafe mode... I get always a black screen.
But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not...
To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
