OpenSUSE Install :: What Means The Boot Option "showopts"
Jan 7, 2009What means the boot option "showopts"?
View 3 RepliesWhat means the boot option "showopts"?
View 3 RepliesUnder Windows XP in the C Drive, I've downloaded PLoP boot manager to force the USB boot. I've tried about a thousand things and I get a different error message at different times from each attempt. I've got all of those documented, and I imagine I'll need to post them. I'm just not doing it quite yet as sometimes I give too much information and I really feel that I'm being an idiot here, missing something simple.
I'd like to install openSUSE onto the D Drive, using the USB and PLoP to boot it. I've downloaded openSUSE's torrents for all iso's (Net, DVD and LiveKDE). In order to get those files onto the USB, I first format to FAT32. I've tried UNetBootIn, LiLi, and mounting the iso on Daemon Tools and then copy-paste into the hard drive. None of these work and they all give different errors.Is this even possible, am I wasting my time? This is getting incredibly frustrating as I've been at it for nearly a week.
I have openSuse 11.2 along with Windows, I get an option on boot to choose between the two OS, but the default is suse. How can I change the default load to Windows
View 1 Replies View RelatedAfter giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
I lost boot option for Opensuse. I am sure it is still installed, only thing I want to know is how to bring the boot option back. I had duel boot option for vista and opensuse now after switching on vista starts by default and I am not having any option for choosing one of them as I had before.
View 9 Replies View RelatedI have already started a thred here about RAID failure: RAID5 failed, system drops into limited single mode - openSUSE Forums
I was not able to boot the system until I commented /dev/md0 in fstab
Why is it so?
This is just a files sharing partition, it is not a system partition.
Is there any option to always ignore any errors and continue boot?
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
View 9 Replies View RelatedIs it possible using YAST to make it possible to be given the option to boot the previous kernel when a new one is installed during an update?
View 9 Replies View RelatedI've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies View Relatedwhen I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies View RelatedI have just installed Ubuntu 11.04 alongside Windows 7. Once the install was complete it asked me to restart and when it went to boot i never got the choice in which OS i wanted to start. How can I fix this?
View 7 Replies View RelatedI put windows 7 on my desktop which is a dell E521. I had windows vista on their previously and had a dual boot setup on it. When I installed win 7 on I just did the upgrade so I wouldn't have to reformat my hardrive and now when I boot up it will not show the option to boot into windows or ubuntu.
View 6 Replies View Relatedhow to edit boot option. I had install Win7 and Ubuntu in my laptop. I want to change boot order win7 at up and ubuntu at down. so if i turn on laptop in 8sec if i not choose which OS to enter, by default it will choose win7 to boot.
View 3 Replies View Relatedright now, my machine runs ubuntu 10.10 due to work issue, i need to use windows server 2008 R2 (its a windows exclusive company) but i never used any of the active directory or anything from the windows server (only experience with windows is visual studio and those GAMES!), so i figure i need to practice a bit on my own b4 starting the job and just at the same time I found out as a univ student i get it for free! And plus, I am finding opensuse a better option for me than ubuntu So im wondering what i should do regarding these 2 systems here s some option
1). Install openSuse 11.4, and install VirtualBox and use windows server 2008 R2 on vbox
2). Install windows server 2008 R2 and then install openSuse alongside with it
3). Install windows server 2008 R2 and install openSuse in virtualBox
I have been using linux as my primary OS for more than a year now and I rlly need it for both school and my own entertainment. So wondering which option would best work out for me
wat are your opinions? PS: my machine is about 2 years ago a Dell laptop, with core 2 duo p8700 (2.53ghz) 4GB ram, and nvidia gfx, which even tho is still fast, but isnt rlly that snappy when it comes to virtualization even running xp in a virtual machine is quite laggy at times :S
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies View RelatedNo option to install alongside another OS. I have Win7 Starter on this new netbook and need to install Ubuntu 10.10 netbook addition. Disk Management shows 4 partitions, one is C:, one is D:, and two I've never seen before they're so small. Is it safe to delete these or do they have a purpose for the current Win OS? I would gladly install the 10.10 to my D: drive which seems to be SDA2, the 131GB partition. What's the right sequence of partitioning and formatting to give Ubuntu the full install it needs manually? And what needs to be taken care of for a Swap drive?
View 9 Replies View Relatedthis post started after i have googled around about 2h without solving my problem: the higher the resolution is i set to my opensuse, the greater the symbols and text-sizes of my windows will be (pictures follow).
i installed openSuse in my vmware Workstation tryed differnt screen-sizes. for example here is a perfect display quality with a res of 1024x768: but if i change the res to 2560x1600 i get really ugly results. is there a setting to avoid the resizing of windows like firefox or dolphin /fixing the dpi?
Basically what it says in the subject. In the Allocate Drive Space part of installation theres 'replace Windows 7 with Ubuntu' and 'Something else' but nothing for installing them alongside each other, which I want to do.
View 14 Replies View RelatedI have downloaded a film from a commercial TV station for my own use and want to edit out all the advertising breaks. I have tried Cinelerra but I cannot find a means of deleting selected frames, I also looked at trying to use Kdenlive but cannot find a way of loading the complete film to work on so unable to tell whether it might be useful.
View 8 Replies View RelatedI used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
i successfully install backtrack 3 but i cant see windows option anywhere in my lilo boot loader
View 10 Replies View RelatedI have successfully setup a FOG server to image my Windows clients, so I have tftp, pxe and anything else related to booting to a pxe server setup and rocking. What I'm trying to do now, is use the CentOS net install files to setup CentOS on an old server with no USB boot option, and a broken scsi cdrom drive (it's a Dell PowerEdge 2400, with a single PIII 733 and 1.25GB ram).
Using the FOG Projects gparted wiki entry (adding gparted to the pxe boot menu) I was actually successfully able to pull the net install files over to the PE, and install CentOS 5.5 via local ftp server. At first it kept erroring out (I kept picking and choosing individual packages from the package groups), so I thought it may be an issue with the GUI install (the python script kept spitting back errors forcing a reboot). In any case, I finally got through the GUI install, but now I need / want to know how to force a text mode install.
[Code]....
the bolded "append" line is where I thought I could force the text mode install script, but that didn't work. The vmlinuz and initrd.img files were both pulled form the net install iso, NOT the livecd. Would that have made a difference? If not, what / where / how should I force the text mode install script?
Got it on a CD and was using it as "Try Ubuntu" instead of installing it for good (I still wanted to see if there were memory issues or HDD issues with my desktop, before I installed it for good).Anyway, I would shut down the pc after about 2 or 3 days and redo the CD install (try ubuntu option) again and add all the plugins etc.Kids used this for playing some games on friv or nickjr.The real issue - of late, when I try to start the PC and boot from the CD, I am getting a LOGIN screen instead of the regular option to install from CD or Try the Ubuntu.
View 9 Replies View RelatedI have openSuse 11.2 64 bit on my desktop machine. I have both KDE and Gnome installed but have no option called Gnome in the Session_Type list.Am I missing some packages?
View 8 Replies View RelatedIm trying to install GNOME-3 on top of kde and have GNOME DE option show up in kdm. I have SUSE DVD and have set local(OD) repository priority to 80 in order to get most packages from DVD. Inspite of that YaST pulls packages from online repositories, it may be the latest version. I have 8 MbPS dsl but the YaST download speeds are around 500B. How do I change mirrors of repositories. In my opinion this has nothing to do with ipv6, I use ipv6 for openBSD and it get good browsing speeds. Im trying to set kdm4 login manager but it doesnt start after enabling for YaST-/etc/sysconfig.
View 1 Replies View RelatedAfter the install on the hd I had to modify manually the start option otherwise I wouldn't. I found out in the option that I have to give: pci=noacpi and the start will go on. My question is, how to do this automatically, I mean modifying before every boot would be annoying.
View 6 Replies View RelatedI'm trying to mount some file systems in the /sys directory with the nosuid option. Upon executing the command:
mount -o remount,nosuid /sys/kernel/security
or
remount nosuid /sys/kernel/security
/etc/mtab will show that they have been applied, but upon restart of the machine, the nosuid option is removed.
Soooo, the question is why are they being removed? Can /sys files carry the nosuid option?
I have an openSUSE 11.3 system happily running KDE 4.4.4, and want to add Gnome desktop as an option. I go into YAST->S/W Mgmt->Patterns and click on 'Gnome Desktop Environment' and get this warning - "pattern:gnome-11.3-22.1.x86_64 requires patterns-openSUSE-gnome, but this requirement cannot be provided" (screenshot here). It looks like the conflict is with patterns-openSUSE-kde4_pure, which lists the Gnome RPM and pulseaudio as conflicts.
Questions: Is this only for bookkeeping purposes, or is there really a conflict having both desktops on one system? Will I have conflicts with pulseaudio? (I know I can disable it) If I want to go ahead, should I just select deinstallation of the ..._pure RPM?
In installation time I leave checked auto log in for the first created user. Now when the machine starts in automatically enter to first user account with the last used desktop environment. In does not prompt for log in, password, and desktop environment choose. When I want a second user, I must log out from the first created, and e log in as second. How can I now disable this option of the auto log in?
View 1 Replies View Related