OpenSUSE Install :: Unable To Boot After Online Update Option?
Dec 17, 2010
I've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies
ADVERTISEMENT
Sep 21, 2010
when I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
View 8 Replies
View Related
Jul 26, 2010
I manage a computer remotely in a different country. The last upgrade I did (to openSUSE 11.2) seems to have had one issue that I didn't work out until later. I am unable to "Online Update" or "Software Manage" the system. Whenever I do I get the following error:
[Code]....
I have been through a number of attempted fixes via the thread 434687-software-repository-corruption but have not managed to resolve the issue. There is no one at the location that could repeat the "update" to hopefully fix the issue that way. I have a copy of the 11.2 DVD iso file on the remote computer. Is there some way that I can get the repository DB rebuilt or reinstalled so that I can then install other software and do Online Updates? Whatever I try has to be doable with the system running so that I can OpenVPN connect and issue commands remotely.
View 3 Replies
View Related
Apr 21, 2010
On my work computer I installed Opensuse11.2 in VirtualBox. However online update or installs which are downloaded through YAST2 are not working. I get the message "Failed to download media ....." and that's it. I configured the proxy and when using the test proxy button it tells me that the proxy works OK. If I copy the link from yast into Firefox I get to the site of the repositories without problems only Yast cannot connect. Neither from the GUI nor from the console. I had no problems with Opensuse11.0 and previous versions. WHat is the problem?
View 7 Replies
View Related
Apr 30, 2011
I performed the online update which included a kernel upgrade. After restart I no longer get a working display. Otherwise appears to boot, as I can see the drive from my laptop via samba. I cannot get a display in either normal boot nor in failsafe. I am also not able to get a terminal screen.Grub boot includes VGA=0x31aAre there any other boot options I can enter to at least get to a terminal?
View 9 Replies
View Related
Mar 16, 2010
Yast online update is installed, but no repositories were configured. On previous installations, they were.
Is this a known problem, and how can I pull in the full list?
View 5 Replies
View Related
Jun 14, 2010
I know I should be able to do an online update using cl zypper but would much prefer to use Yast's sw manager as it's easier to review and respond to package issues that always arise (because of packages made by me or dl'ed from obs but from repos not enabled in the repo manager)currently running 11.2
View 9 Replies
View Related
Apr 29, 2011
Not sure this is the right place and I feel really stupid for asking this but, I want to change the frequency of the online update checks but, for the life of me, cannot find out how. During install, I can configure it but I now want something different. I thought that there was a topic with yast under software but no. Only "online update" which basically give me manual update. I click on configure but same screen appears.
View 2 Replies
View Related
May 21, 2011
in the last few days, Kpackagekit, which I use to update my system (openSUSE 11.4) had some difficulties to
1. install updates for flashplugin, because whenever you accept the license, Kpackagekit closes, and starts from beginning = a never ending cycle is started
2. fetch updates from Packman. It always throws a message with connection timeout - in Zypper and YaST no such problem occurs
Thats why I have fiddled around in YaST online update and found a feature "automatic online update". For that you need an extra package yast-online-update-configuration. I installed it and configured it to do automatic Updates.
So now I have a question on how it works. Because I have some additional repos activated: KDE updated Apps, KDE extra and the KDE release 4.6 repo, which brings the most recent KDE updates for KDE 4.6.
These repos have priority 90 whereas all the other repos - Packman, OSS, Non-OSS, Contrib etc. have prio 99.
Will YaST install all the updates from KDE with this setup? I am asking, because when I did online updates in Yast before, with prio 99 for the KDE repos, it did not update them, unless I choosed, "Packages --> update all, if newer version is available". I would like to set Kpackagekit into silent and just stick with YaST for that, but have an automatic system update.
View 4 Replies
View Related
Feb 21, 2011
I am using OpenSuSE11.1 very frequently I need to install and update the software and packages.but I am getting this error: Download failed:File '/repodata/repomd.xml' not found on medium URL...
View 3 Replies
View Related
Sep 7, 2010
how certain packages such as glib, yast2, etc. are part of "Online update" i.e. new versions show up there, whereas certain packages are not (e.g. NVIDIA drivers). Is it a setting on the repository, the package, or does the new version need to be labelled specifically?
View 3 Replies
View Related
Jan 6, 2011
I was using tripleboot system in one hard drive. That included Windows 7,Ubuntu 10.10 and Ubuntu 11.04. And yesterday I decided to added openSUSE 11.3 at another partition. I'm using Ubuntu 11.04 grub2 as bootloader.
At first there was no problem. All OS detected well, but after opeSUSE online updates last night my openSUSE partition won't boot. First, at boot I chose openSUSE and it said "Boot kernel first" and nothing happens. And then I boot to ubuntu and ran update-grub then I saw grub no longer detected openSUSE partition.
View 9 Replies
View Related
Jun 1, 2011
I got a workstation with openSuse 10.3 pre-installed. After I did the Online Update from YaST2 and rebooted the machine as requested by YaST2, the system came to fail starting up an X session.
Below are excerpts of the message appeared on the screen at the end of the boot process. (I transcripted it from the screen by hand.)
Code:
Waiting for mandatory devices: eth1 __NSC__
10 9 8 7 5 4 3 2 1
eth1 devices: Intel Corporation 82573L Gigabit Ethernet Controller
eth1 DHCP4 client (dhcpcd) is running
[Code].....
what is causing the failure of the X session and how to fix the problem? I would be glad if you give me any hints or pointers.
View 9 Replies
View Related
Aug 29, 2010
Under Windows XP in the C Drive, I've downloaded PLoP boot manager to force the USB boot. I've tried about a thousand things and I get a different error message at different times from each attempt. I've got all of those documented, and I imagine I'll need to post them. I'm just not doing it quite yet as sometimes I give too much information and I really feel that I'm being an idiot here, missing something simple.
I'd like to install openSUSE onto the D Drive, using the USB and PLoP to boot it. I've downloaded openSUSE's torrents for all iso's (Net, DVD and LiveKDE). In order to get those files onto the USB, I first format to FAT32. I've tried UNetBootIn, LiLi, and mounting the iso on Daemon Tools and then copy-paste into the hard drive. None of these work and they all give different errors.Is this even possible, am I wasting my time? This is getting incredibly frustrating as I've been at it for nearly a week.
View 9 Replies
View Related
Jan 4, 2010
I have openSuse 11.2 along with Windows, I get an option on boot to choose between the two OS, but the default is suse. How can I change the default load to Windows
View 1 Replies
View Related
Jun 21, 2010
After giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
View 7 Replies
View Related
Jan 29, 2011
I lost boot option for Opensuse. I am sure it is still installed, only thing I want to know is how to bring the boot option back. I had duel boot option for vista and opensuse now after switching on vista starts by default and I am not having any option for choosing one of them as I had before.
View 9 Replies
View Related
Jul 13, 2009
I have already started a thred here about RAID failure: RAID5 failed, system drops into limited single mode - openSUSE Forums
I was not able to boot the system until I commented /dev/md0 in fstab
Why is it so?
This is just a files sharing partition, it is not a system partition.
Is there any option to always ignore any errors and continue boot?
View 5 Replies
View Related
Dec 5, 2009
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
View 9 Replies
View Related
Sep 28, 2010
Is it possible using YAST to make it possible to be given the option to boot the previous kernel when a new one is installed during an update?
View 9 Replies
View Related
May 2, 2010
Machine: Win2000 Pro, AMD64 Athlon 2GHz, 2x80Gb HD, 2 GB RAM Symptoms: Running 9.10 with dual boot no probs for ~ 1 year. Decided to upgrade online via synaptic to 10.04. Upgrade went well no warnings, etc. On reboot all OS options present in Grub BUT clicking on Win2000 causes the screen to blank temporarily and then return to the Grub menu ie. no functioning Win2000 boot option. Ubuntu 10.04 boot yields blank screen with flashing cursor, a sudden stream of IO error messages (can't capture it but the lines look identical) then screen flickers and I'm at the purple log in screen and everything proceeds perfectly from there.
Observations: For the first time on any of my ubuntu installs (i've been using since 8.04 always installing from CD though) grub installation asked where I wanted it. In fact, the screen shows all devices with check boxes wth which to make my choice. That is sdb, sdb1, sdb2, ... , sda, sda1, sda2, There was a message that says that if in doubt install on _all_. Being in doubt I checked all the boxes: sdb, sdb1, etc. I noted in the message streams that followed after i continued that some lines had "... this is BAD ..." but since it was all rolling along very quickly no idea exactly _what_ was bad.
Action: I am not a linux newb but I am a grub newb. I fished the forums and googled only to come completely confused about what the problem might be or what to do. Example: have i overwritten my win bootloader? is my mbr corrupted? if i remove grub what will happen? if i remove and reinstall grub will i get windows booting back? if i use my win2000 install CD will it overwrite my whole disk (as many warn) or can i just fix the mbr? if I do the latter what order do i ie use fix mbr then fix boot? The info i've come across so far either doesn't address what happened to me, deals with other OSs (XP, Vista), or is applied to earlier editions of grub/ubuntu. Right now I have not found a clear step by step that addresses my circumstance. Would anyone be able to provide some guidance? I need the windows boot to run some software (Matlab) that btw will not work with XP/Vista (hence the reason i still have win2k).
View 9 Replies
View Related
Nov 29, 2010
I loaded the Pre-Release version of Ubuntu 10.10.1 32 bit workstation. It ran mostly fine for about a 2 months. Then I did an online update and it told me that I had to reboot. When I did, I booted to a splash screen and then a dead machine with a black screen where control-alt-delete does nothing, no disk activity, no mouse, no keyboard, totally dead. Had to hit reset button. I booted to a suse partition and hacked the grub entry to remove the splash and silent to get more spew at boot time. The last thing before the screen goes black is starting NBD client. I have my email and various directories on my central server so I need NFS. Is there a way I can hack my way to get it to boot even without NFS temporarily to possibly rebuild the nbd kernel module? I have looked at the /var/log/ syslog, daemon, debug, kern messages and gdm log files and don't see any indication of why it crashed. Where else can I look?
View 3 Replies
View Related
Nov 4, 2010
I'm running Opensuse 3 on an EEE PC, and so far had no problems. I brought it to another house today and now Firefox seems to be unable to connect to the network.. Network is working however, as Skype is running fine. Online update won't work either.
View 5 Replies
View Related
Mar 26, 2010
Since applying a number of updates using the online update tool in Yast, the online update tool can no longer contact the software repositories which were configured in Yast.If i browse to the URL which is configured within the software repo config tool, I can see the updates & folders fine in Firefox.Zypper seems to do the same thing & just sits there if I do zypper update.I see a number of other people in this forum have had the same problems, any ideas as I couldn?t find a resolution?
View 1 Replies
View Related
Dec 17, 2010
I'm running 10.3, KDE, 32bit. I am working with a fresh install. The updater stated that I had updates , I accepted the updates. At this point the updater failed in some way. It did not become a zombi but stalled. I quit the updater. Now when I try and get online updates using the sys tray updater it sais none available. When I use yast online update it has some recommended updates but does not install them. I rebuilt the rpm data base and this did not help.
How can I "reset" the updater. I believe that it thinks that it did go thru the updates and therefor cant see that they still need attention.
View 3 Replies
View Related
Nov 8, 2010
I cannot use the online update and any other web repository because I got the following error while using the online update:
Code:
Errore durante il download di (curl) per 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Codice dell'errore: Connection failed
Messaggio dell'errore: couldn't connect to host
the translation is:
Code:
Error during downloading (curl) from 'http://packman.iu-bremen.de/suse/11.3/repodata/repomd.xml':
Error code: Connection failed
Error message: couldn't connect to host
I would point out that any other application that needs accessing the internet is working correctly.
View 9 Replies
View Related
Oct 15, 2010
It appears I have gotten a bug when I try to update 11.0 or download even a update foe firefox. When I tried to see if there were any updates it said it could not do it and put up a screen stating the following. File'/repodata/repomd.xml/' not found on medium [URL]. Is there a way to fix this problem? I am a 66year old quy who is trying to learn the ins and outs of Lenox so please keep it simple.
View 4 Replies
View Related
Sep 14, 2010
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies
View Related
Feb 4, 2010
I am whittling down my list of available YAST Online Updates for OpenSUSE 10.3. Most of the few remaining updates will not install because of an endless error list like this (xmessage on cancel):(gtk:4929): GLib-GObject-WARNING **: invalid cast from `GtkTextView' to `YGtkRichText'** (gtk:4929): WARNING **: Unknown tag 'p'
View 1 Replies
View Related
Dec 2, 2009
I was using audacious happily, but after the dist-update last week I can't get is working anymore. The error message is:
audacious2: symbol lookup error: audacious2: undefined symbol: index_new
Version: audacious-2.2-1.pm.5.1
uname -a output is: Linux linux-9b84 2.6.27.39-0.2-default #1 SMP 2009-11-23 12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux
Deleting .config/audacious, .local/share/audacious, and .cache/audacious doesn't help (it did with a similar problem before). how to get this program working again?
View 9 Replies
View Related
