Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
i successfully install backtrack 3 but i cant see windows option anywhere in my lilo boot loader
View 10 Replies View RelatedI am dual booting winxp and opensuse 11.2 on a 80gb harddrive with 3 partitions. first primary conatins xp, second logical and active contains opensuse and third primary holds data. i want to create another partition after /dev/sda3 using the free space from /dev/sda3.can u advise me if it is possible? and if yes, what do i need to consider. here is the output of fdisk -l
Code:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x285adb1d
[Code]...
under ubuntu how can i install grub boot loader ?is there a program that let me do it ?i would like to add a grub load to an hard disk , and maybe to an usb stick and to a floppy disk
View 9 Replies View RelatedI want install 10.10 Maverick on a new partition alongside my OS X and 10.04 Lucid installs to see if it works on my machine. I'm a little unsure about some things.
1)Do I need to install the GRUB boot loader on this new partition?
2)Can I use the same swap space or is recommended to create a new swap?
I'm using the RAID1 setup, which is configured in the BIOS, as it is a HP Proliant server. i have 2 500GB hard drives configured in a mirror. when booting the install, it recognises this, and deals with it fine.
The problem is, when it gets to the section of installing the grub2 boot loader, it just stops and gives me the "ubuntu installer main menu" where if i select grub boot loader install it just loops back, and if i select LILO installer, it errors, saying an installation step failed.
It has the option to skip installing boot loader, but then, can i get it to boot a different way? can i boot manually into the server install and then install GRUB and hope it works? can i install grub1 rather than grub2?
I am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?
View 6 Replies View RelatedI have installed Fedora-9 and i customized my kernel. But i did a big mistake in the last steps while customizing. Unfortunately i have executed below shell cmd. grub-install /dev/sda windows drive is not visible But /dev/sda3 is a windows vista file system, now sda3 file system is not in visible for both in linux and also vista OS. How can i retrieve my data back in vista sda3. Here is the info of system
$ su -c '/sbin/fdisk -l'
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
I got an HP ProBook 4520s that comes with 500 GB with Windows 7.
It comes with 4 partitions: SYSTEM, the main Windows partition, HP Recovery and HT Tools.
I tried to have OpenSuse installation to resize the Windows larger partition but it said that it couldn't with this message:
"The partition on disk /dev/sda is not readable by the partitioning tool parted, which is used to change the partition table.
You can use the partitions on disk /dev/sda as they are. You can format them and assign mount points to them, but you cannot add, edit, resize, or remove partitions from that disk with this tool."
So I resized the Windows partition from Windows 7 and added 3 partitions on the empty space for Linux: /, swap and /home. Still OpenSuSE installation has shown this warning message:
"The bootloader is installed on a partition that does not lie entirely below 128 GB. The system might not boot if BIOS support only lba24 (result is error 18 during grub MBR)."
I configured OpenSuSE installation to install on those partitions but Grub could not install the boot loader with this message: "grub> setup --stage=/boot/grub/stage2 --force-lba (hd0,2) (hd0,2)
Error 17: Cannot mount selected partition grub> quit"
I already tried this in OpenSuSE 11.4 but I suspected it needed newer parted and grub versions, so I also tried OpenSuSE 12.1 milestone 3 with the same results.
The installation finishes but no Grub boot menu appears, it goes to Windows as if no Linux was installed, although the installed version is there in the 3 partitions that were created on Windows, I just cannot make them boot.
This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.
I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.
I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?
View 2 Replies View RelatedI am a brand new Ubuntu user that just tried to install on an old PC using the 10.10 desktop edition.During installation, I hit an error that the bootloader could not install, and after reading about it on the forums, opted to attempt to install it manually after. I have followed the tutorial located here,[URL].. on reinstalling GRUB2 from the liveCD, which I assume means to boot with the installation CD and select try Ubuntu (given the only other option is install, which I have tried twice) everything up to step 5 in that tutorial seems to run successfully, and I am given a message it is installed, but then when I reboot the system it does not open the GRUB2 menu, rather the CLI interface, which suggests there is no grub.cfg
So I am unable to refresh at the GRUB menu because that command is not recognized by the CLI (and it may not help if I am missing files, so I might have screwed up reinstalling them in step 5, or maybe the "Try Ubuntu" terminal doesn't alter the computer like I thought?)
I have a Dell Inspiron 1721. Recently I replaced Windows Vista Home Edition (32 bit) with Slackware Linux 13.
Lilo wouldn't work, when I turned on the computer it printed "Li" and then 20 lines of 090909... and then the computer would hang up. So I just used my Slackware-boot-flashdrive-thing that I created during installation to boot my computer and told myself that I would fix it later.
Also, when I installed, cfdisk (or it might have been sfdisk) complained that /dev/sda did not contain a valid MS-DOS partition table. fdisk still worked, so I used it to create a new table, and cfdisk worked fine and the installation went along normally.
I reinstalled Slackware about two days later (I realized that I had installed the 32 bit version instead of the 64 bit). Lilo still didn't work.
I thought it might be something wrong with the Slackware DVD, so I downloaded and attempted to install about 4 different distributions. None of the CDs would work. The computer would start up, Linux would start to load, and the computer would freeze.
Xubuntu was the only distro I had that I could get to install. Halfway through the installation, (Surprise!) I got an error, something like "Package Grub failed to install, you will not be able to boot your new operating system".
The rest of the install went fine, so I restarted my computer and tried to use another one of my CDs to boot Xubuntu. I got the error "/dev/sda does not contain a valid partition table", and later "ext4-fs: checksum failed on dev sda at sector...", and "please specify a valid partition for root=". I am absolutely positive that I entered the correct partition, I triple checked and entered other partition names to make sure.
I'd also like to add that the computer makes horrible crunching noises when it starts up and when I do stuff like press keys. So is something seriously wrong with my hardware, or is there another explanation for all of this? Because I really don't want to have to try to repair the computer and can't pay to have it repaired.
I am using Fedora 10, and was wondering if it is possible to install Windows XP on a free partition, without it replacing the GRUB boot loader?
View 6 Replies View RelatedWhen openSUSE was installed, GRUB information was installed in the Extended partition rather than in the MBR.
I have a triple boot system: Windows XP Pro, openSUSE, and another popular distro on Linux. The other distro put GRUB info in MBR. Now when I boot up it goes to member first. If I select openSUSE, the GRUB info in the extended partion is accessed and a 2nd selection screen is displayed.
I tried reloading the GRUB data for openSUSE selceting to install it in MBR but this does not seem to work.
How do I get rid of the GRUB stuff in the extended partition so that the 2nd GRUB screen does not get displayed?
Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.
My question is...is this a problem? it seems to work fine but i dont want to have problems later on.
After giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies View RelatedA failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I just did a fresh install of 11.4 and I LOVE IT!!! One of the little issues I am having though, is that there is no login screen. No matter what settings I change it still auto-logs me in.
I am using GRUB and the Boot Loader Location has both "Boot from MBR" and "Boot from Root Partition". Is this right? I would think that I should just boot from the MBR.
I have a laptop with windows vista installed on the internal hardrive.Last March I installed wanted to start to use linux so I brought a separate external hardrive partitioned it to enable media storage on one section and installed ubuntu on the other half. It works fine and so does the windows vista on my internal hardrive, however I have to have the hardrive plugged in to boot.Until now this hasnt bothered me, however I've recently started to take my laptop into university and cannot switch it off unless I have the external hardrive with me as I cannot switch it on without it.With it plugged in it loads up GRUB and then gives me the option to load either Ubuntu or windows vista, however if it is not plugged in when I power up it says GRUB loader failed.It also occured to me that if for some reason my external hardrive fails in the future I wont be able to use my laptop anymore.Has the installation of ubuntu (and GRUB) altered the MBR?
Is there some way I can edit the settings so that I can load windows vista without the hardrive plugged in, and then if it is plugged in I get the choice which one to load?
PC: Dell Precision T7400.O/S: Windows XP SP3 64-bit & Scientific Linux 5.3 64-bit
The above PC has 2 HDDs installed one has XP and the other Scientific Linux.
Problem: XP needed to be re-installed, i've done this now but now the GRUB Boot loader doesnt load - So just boots straight into XP.
Qustion: Is there anywhere to fix the GRUB? Without wiping the 2nd HDD and re-installing Linux!
Let me know if you need any more info
This seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
Every dual boot guide and every dual boot I've set up I've done the same way. Always install Windows first then install Ubuntu. Well, this time Windows didn't let go of the bootloader it seems like. I have kind of an awkward setup for hard drives...32gb SSD /2X250gb raid1 /home 3gb(at beginning of 1tb HDD) swap
The rest of the TB is Windows 7 Home Premium. I installed Windows 7 without problems the installed Ubuntu 10.04 x64 without problems. It asked if I wanted grub to overwrite mbr I said yes. Computer rebooted... Straight into Windows. I downloaded EasyBCD and added grub to Windows boot menu. The option works great, goes straight into grub. Grub even has Windows listed.
Why is my computer using Windows boot manager and how do I switch it to grub?
I'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies View RelatedI have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
