how to edit boot option. I had install Win7 and Ubuntu in my laptop. I want to change boot order win7 at up and ubuntu at down. so if i turn on laptop in 8sec if i not choose which OS to enter, by default it will choose win7 to boot.
View 3 Repliesi am trying to use CentOS as well. I know many things are same. But i am getting stuck at one place where I am trying to enable support of JFS during installation at the boot option like we can do in FC.But i am unable to edit boot option. For my fedora system i used to do it in this way.The first installation screen is showing me options those i can edit by pressing Tab and then i can edit the line where i add 'jfs' and it starts appearing in the drop down menu of filesystem during setting up partitions on hard disk.
given same in kernel parameter by pressing f4 but jfs does not appear in the drop down menu during partitioning of disk.
Basically what it says in the subject. In the Allocate Drive Space part of installation theres 'replace Windows 7 with Ubuntu' and 'Something else' but nothing for installing them alongside each other, which I want to do.
View 14 Replies View Relatedi successfully install backtrack 3 but i cant see windows option anywhere in my lilo boot loader
View 10 Replies View RelatedI have Windows XP as well as Ubuntu in my desktop. I would like to temporarily disable XP for a month or so, so that One cannot see Windows XP appearing in the grub menu list or during the boot. Is there is any option to edit the grub menu?
View 1 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI have just installed Ubuntu 11.04 alongside Windows 7. Once the install was complete it asked me to restart and when it went to boot i never got the choice in which OS i wanted to start. How can I fix this?
View 7 Replies View RelatedI've set up a triple boot system (Ubuntu Karmic, Windows Vista and OSX86 -- a patched OS X which works on a PC) on a Dell 9200 (C2D 2.13 GHz, 4GB RAM, nVidia G210). I sue Grub2 as the bootloader and update-grub picks up OS X and it boots without any problem.
However, although when booting OS X using its own Darwin bootloader, I can apply the boot option "Graphics Mode"="1680x1050x32" to ensure that I get the screen resolution that I want, when OS X boots from Grub2, the only resolution available is 1024x768 which is disappointing. I have tried adding gfxmode=1650x1050x32 to the OS X section of /boot/grub/grub.cfg in Ubuntu but this does nothing.
Under Windows XP in the C Drive, I've downloaded PLoP boot manager to force the USB boot. I've tried about a thousand things and I get a different error message at different times from each attempt. I've got all of those documented, and I imagine I'll need to post them. I'm just not doing it quite yet as sometimes I give too much information and I really feel that I'm being an idiot here, missing something simple.
I'd like to install openSUSE onto the D Drive, using the USB and PLoP to boot it. I've downloaded openSUSE's torrents for all iso's (Net, DVD and LiveKDE). In order to get those files onto the USB, I first format to FAT32. I've tried UNetBootIn, LiLi, and mounting the iso on Daemon Tools and then copy-paste into the hard drive. None of these work and they all give different errors.Is this even possible, am I wasting my time? This is getting incredibly frustrating as I've been at it for nearly a week.
I put windows 7 on my desktop which is a dell E521. I had windows vista on their previously and had a dual boot setup on it. When I installed win 7 on I just did the upgrade so I wouldn't have to reformat my hardrive and now when I boot up it will not show the option to boot into windows or ubuntu.
View 6 Replies View RelatedI have openSuse 11.2 along with Windows, I get an option on boot to choose between the two OS, but the default is suse. How can I change the default load to Windows
View 1 Replies View RelatedAfter giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
I lost boot option for Opensuse. I am sure it is still installed, only thing I want to know is how to bring the boot option back. I had duel boot option for vista and opensuse now after switching on vista starts by default and I am not having any option for choosing one of them as I had before.
View 9 Replies View RelatedNo option to install alongside another OS. I have Win7 Starter on this new netbook and need to install Ubuntu 10.10 netbook addition. Disk Management shows 4 partitions, one is C:, one is D:, and two I've never seen before they're so small. Is it safe to delete these or do they have a purpose for the current Win OS? I would gladly install the 10.10 to my D: drive which seems to be SDA2, the 131GB partition. What's the right sequence of partitioning and formatting to give Ubuntu the full install it needs manually? And what needs to be taken care of for a Swap drive?
View 9 Replies View RelatedI installed 3 OS in my computer, first Windows xp, second Ubuntu 10.10 up to here I could go in to each one of them, but I installed Fedora 14 x64 after Ubuntu. Now I can only go to Fedora and XP, but I am not able to even see Ubuntu only in the shell, it is not in my boot options.
View 2 Replies View RelatedI have already started a thred here about RAID failure: RAID5 failed, system drops into limited single mode - openSUSE Forums
I was not able to boot the system until I commented /dev/md0 in fstab
Why is it so?
This is just a files sharing partition, it is not a system partition.
Is there any option to always ignore any errors and continue boot?
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
View 9 Replies View RelatedIs it possible using YAST to make it possible to be given the option to boot the previous kernel when a new one is installed during an update?
View 9 Replies View RelatedI've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies View RelatedI used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
I have successfully setup a FOG server to image my Windows clients, so I have tftp, pxe and anything else related to booting to a pxe server setup and rocking. What I'm trying to do now, is use the CentOS net install files to setup CentOS on an old server with no USB boot option, and a broken scsi cdrom drive (it's a Dell PowerEdge 2400, with a single PIII 733 and 1.25GB ram).
Using the FOG Projects gparted wiki entry (adding gparted to the pxe boot menu) I was actually successfully able to pull the net install files over to the PE, and install CentOS 5.5 via local ftp server. At first it kept erroring out (I kept picking and choosing individual packages from the package groups), so I thought it may be an issue with the GUI install (the python script kept spitting back errors forcing a reboot). In any case, I finally got through the GUI install, but now I need / want to know how to force a text mode install.
[Code]....
the bolded "append" line is where I thought I could force the text mode install script, but that didn't work. The vmlinuz and initrd.img files were both pulled form the net install iso, NOT the livecd. Would that have made a difference? If not, what / where / how should I force the text mode install script?
In my Red Hat 7.2 , the /boot/grub/grub.conf has the following data :
But when I reboot my Red Hat server , I don't see the Grub menu to say edit the boot kernel .
Got it on a CD and was using it as "Try Ubuntu" instead of installing it for good (I still wanted to see if there were memory issues or HDD issues with my desktop, before I installed it for good).Anyway, I would shut down the pc after about 2 or 3 days and redo the CD install (try ubuntu option) again and add all the plugins etc.Kids used this for playing some games on friv or nickjr.The real issue - of late, when I try to start the PC and boot from the CD, I am getting a LOGIN screen instead of the regular option to install from CD or Try the Ubuntu.
View 9 Replies View RelatedI have Ubuntu 9.10 64 Bit, and I also have Windows 7, and I want to make Win7 boot first and without having to manually choose it every time I restart, for my non-linux using family. I have tried the guides where it says you have to edit the "menu.lfg(or whatever it is)" and I don't have that file. I have looked, it's not there, the closest I found was "grub.cfg" and I can't make any sense out of it. I'm not unfamiliar with computers, I'm just relatively new to Ubuntu, and want to make the best out of it I can, I love it. I've tried going into GRUB, and and editing the Win7 Loader, but it doesn't work.
View 4 Replies View RelatedRunning Vista and recently d/l Linux 10.04 with Vista default.
Want to make linux default but when I go to startup manager and select Linux and reboot Vista remains the default.
I was installed linux mint in windows 7 using option "Install inside windows"... I got trouble with windows7 so i reinstalled it... but now there is no option to select OS at the start up... But i have the drive where i installed mint and all other files.. Is there any way to get it back.. Because i dont have time to reinstall mint...
View 1 Replies View Relatedwhen I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
View 3 Replies View RelatedI have downloaded and ran Austrumi-2.1.6 "Live CD" and although the OS booted up and connected to the Internet easily enough I just can't find the option to make the OS boot up using the English language. I must be missing something but can't figure out what?
View 5 Replies View RelatedI've installed Gnewsense on my sda1 and I no longer have the option to load Ubuntu 10.04 on sda2 at boot. As Gnewsense is ext 3 I cannot access my files in my Ubuntu Home dir. Can I simply switch my boot to sda2? It will solve my problem for the medium term.
View 1 Replies View Related