General :: Install Backtrack 3 But Can't See Windows Option Anywhere In Lilo Boot Loader

Apr 30, 2010

i successfully install backtrack 3 but i cant see windows option anywhere in my lilo boot loader

View 10 Replies


ADVERTISEMENT

Red Hat / Fedora :: LILO Boot Loader Does Not Show Windows XP?

Dec 9, 2008

I have a PC with 2 Hard drives one of which has Windows XP Pro installed. I installed Red Hat Linux 7.2 on the other drive choosing LILO as the boot loader. When I reboot LILO only displays Red Hat 7.2 When I boot Red Hat and go into KDE boot settings I can see that hda has Windows NT. hdb has Red Hat 7.2. I then tried to make the Windows NT partition the default entry. When I try to confirm this an error displays warning me of danger if I proceed. Is there any way to make LILO recognize Windows (preferably without having to reinstall Red Hat), perhaps by installing another bootloader application!

View 2 Replies View Related

Slackware :: Lilo Cannot Installed On Windows 7 Boot Loader - MBR

May 8, 2010

I have a WD 80GB ATAPI hard disk for my operatings systems.

The partition table is :

First i installed Windows and then Slackware.

The problem is that in MBR , looks that lilo never installed and when my pc starts, the lilo menu never load it . Boots directly to windows.

What i should do, in order to have the lilo menu in startup?

View 13 Replies View Related

Hardware :: Can't Install Boot Loader - Both Grub And Lilo Failed / Resolve This?

Jan 17, 2010

I have a Dell Inspiron 1721. Recently I replaced Windows Vista Home Edition (32 bit) with Slackware Linux 13.

Lilo wouldn't work, when I turned on the computer it printed "Li" and then 20 lines of 090909... and then the computer would hang up. So I just used my Slackware-boot-flashdrive-thing that I created during installation to boot my computer and told myself that I would fix it later.

Also, when I installed, cfdisk (or it might have been sfdisk) complained that /dev/sda did not contain a valid MS-DOS partition table. fdisk still worked, so I used it to create a new table, and cfdisk worked fine and the installation went along normally.

I reinstalled Slackware about two days later (I realized that I had installed the 32 bit version instead of the 64 bit). Lilo still didn't work.

I thought it might be something wrong with the Slackware DVD, so I downloaded and attempted to install about 4 different distributions. None of the CDs would work. The computer would start up, Linux would start to load, and the computer would freeze.

Xubuntu was the only distro I had that I could get to install. Halfway through the installation, (Surprise!) I got an error, something like "Package Grub failed to install, you will not be able to boot your new operating system".

The rest of the install went fine, so I restarted my computer and tried to use another one of my CDs to boot Xubuntu. I got the error "/dev/sda does not contain a valid partition table", and later "ext4-fs: checksum failed on dev sda at sector...", and "please specify a valid partition for root=". I am absolutely positive that I entered the correct partition, I triple checked and entered other partition names to make sure.

I'd also like to add that the computer makes horrible crunching noises when it starts up and when I do stuff like press keys. So is something seriously wrong with my hardware, or is there another explanation for all of this? Because I really don't want to have to try to repair the computer and can't pay to have it repaired.

View 8 Replies View Related

Ubuntu :: Windows Recovery - Loader - Is My Only Option To Boot Into Vista

Oct 17, 2010

Im dual booting vista and ubuntu 10.10 when i start up i get the option to boot linux OR i can boot window recovery (loader) which works or i can choose windows xp which doesnt even work and im not sure why its there since i dont have xo installed and i never have on this pc. it doesnt say anything about vista anywhere.

My question is...is this a problem? it seems to work fine but i dont want to have problems later on.

View 4 Replies View Related

General :: Windows 7 - Make A Boot Loader Load The Existing Boot Loader From The First Partition?

Jun 14, 2010

I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.

View 1 Replies View Related

General :: Pass Option To LILO In Order To Have Script / Command Executed At / After Boot

Aug 28, 2009

I have one distro installed, LILO as the boot loader, and i wonder if it's possible to duplicate the lilo entries with an option which executes some script or command during, or after the boot.Actually, i installed a Slackware + autolaunching virtual machine, but i have two VM, so i need to autolaunch one of them. May i choose it from the very beginning ?

View 9 Replies View Related

Ubuntu / Apple :: No Option To Install Boot Loader (grub) To /dev/sda3 - Fix It?

Nov 28, 2010

Dual-Boot: Mac OSX and Ubuntu

Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp

https://help.ubuntu.com/community/Ma...elInstallation

View 3 Replies View Related

Debian Configuration :: LILO As A Boot Loader From Grub

Aug 26, 2015

I am thinking about maybe trying "LILO" [URL] ....

For my boot loader, from what I have read it sounds even more tempting.

I am totally sick of GRUB, even though it is what seems to be the most popular,and is what normally is used as the "default" when any linux system is installed, that is what the install ISO's use, but anyway, that is another topic, over the years, "grub failing", has been a problem for me , many times.

I saw this (From LILO to GRUB Howto).

View 5 Replies View Related

General :: Dual Boot Lilo Won't Load Windows

May 17, 2011

Just installed Slackware 13.37 and am trying to get dual boot to work properly. I have edited /etc/lilo.conf to point the Windows section to what I believe should be the correct partition (/dev/sda2) Here is the relevant section

Code:

# LILO configuration file
# Windows bootable partition config begins
other = /dev/sda2

[code]....

I have mounted /dev/sda2 to /ntfs-c as suggested during install and when I browse through there I see the files from my windows setup so it is in fact the correct partition. When I load Windows on boot, however, it is pointing to the recovery partition (/dev/sda1).

View 1 Replies View Related

General :: Boot - Delete Backtrack From The System And Go Back To Windows 7?

Oct 18, 2010

I installed Ubuntu, with a dual boot functionality and worked great. I was recommended Backtrack 4 and I installed it in the system. Now, I try to use the dual boot with Backtrack, Ubuntu and Windows 7 and only Backtrack works. I tried the restore disks that I created when I got the laptop, but the problem persists. s there a way to delete this Backtrack from the system and go back to Windows 7?

View 7 Replies View Related

OpenSUSE Install :: Dual Boot Loader Gone After Windows Reinstallation

Nov 19, 2010

had a dual boot system with openSuse 11.1 and Windows XP working OK - Linux boot loader was where OS selection was made (openSuse was installed after Windows) Last week I had to reinstall Windows and this removed the Linux loader from MBR and Windows booted automatically. I wanted the Linux boot loader back,checked the threads about boot loader restoration and did the following:

- downloaded Knoppix 6.2.1 ISO and burned to CD
- booted with CD
- opened terminal with root privileges and typed:
grub (ENTER)
grub> find /boot/grub/stage1 (ENTER)
> (hd0,2)
grub> root (hd0,2) (ENTER)
>Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0) (ENTER)

setup was successful (no error messages)

Now when booting, i have an error that root (0,3) can not be mounted and "Press any key to continue"??? When hitting any key I see that there is GRUB there with all entries as in original state (Suse 11.1 and Windows) but only Windows can be booted. Then I downloaded live eval of openSuse 11.1 and did the same (booted from CD and run same commands from terminal as root) - again no errors but still "root (0,3)" can not be mounted..

View 9 Replies View Related

OpenSUSE Install :: GRUB Boot Loader After Re-installing Windows XP ?

Mar 21, 2011

This is a problem when Windows is running some malware that cannot be removed, which happens all the time. The problem is all the new hardware or specialized hardware will not work on Linux so Windows is the only choice. I would think the latest versions of Linux would have this problem worked out by now. I installed 11.3 one week ago, only to find that the repair option in the install menu no longer exists so don't bother uses this link to reload the GRUB HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive. I also tried this link Re-Install Grub Quickly with Parted Magic which does not work either. On step 2 typing grub returns the error message "grub command not found". You can use GRUB if you boot the install DVD and select Rescue Boot. However when you type find /boot/grub/menu.lst the error message "file not found" is returned.

I did the following to restore my GRUB boot record. Boot the install DVD and select the update option during installation. Change all the repositories to enable except the NVIDIA repository, it is not responding at this time. When the system comes up go into Yast and open the boot loader. It should have your original boot menu in memory. Change the default to another option and re-write the MBR. This will write a new MBR using the original data updated with your new default. Re-boot and then change your default back. I am just a NewBe so this may not be exactly correct but I hope it saves someone like me some time fixing a MBR re-writing by the Windows installer.

View 1 Replies View Related

Server :: GRUB Boot Loader Lost / Install It From Windows?

May 26, 2010

I have installed Windows Server 2003 after CentOS. Then GRUB boot loader lost. Is there a way I can install GRUB boot loader from Windows?

View 2 Replies View Related

General :: Windows - Third Party Boot Loader?

Aug 28, 2010

Can I separately install a third party boot loader which can boot both Windows and Linux (Ubuntu) . I want to use a boot loader other than the boot loaders which come with these operating systems. I am trying this out of curiosity.

View 4 Replies View Related

Fedora :: Install Windows XP On A Free Partition Without It Replacing The GRUB Boot Loader?

Sep 20, 2009

I am using Fedora 10, and was wondering if it is possible to install Windows XP on a free partition, without it replacing the GRUB boot loader?

View 6 Replies View Related

General :: Incorporate Windows Boot Loader Into Grub?

Oct 23, 2010

I have triple booted Windows XP (195 GB)partition 0? the second partition is Windows 7 (195 GB)And the rest of a 1TB hard drive went to Open Suse 11.3. if it makes any difference I used g parted to create the three partitions and made them all primary. My problem is I want to change the way they all get along. When I boot up, I get the options;

Desktop -- openSUSE 11.3-2.6.34-12
Failsafe -- openSUSE 11.3-2.6.34-12
windows 1
windows 2

which is fine, but clicking on windows 1 takes me to the windows boot loader with the options of windows 7, or previous version of windows. clicking on windows 2 brings up a screen telling me " rootnoverify (hd0,1) chainloader +1 BOOTMGR is missing press ctrl+alt+del to restart" I would like the end result to be windows 1=XP,windows 2=7, then I can rename them accordingly. one more thing, when I installed openSUSE, I let it automatically configure the hard drive and create the necessary partitions(it deleted partition 3 first). i remember it saying somewhere that the boot manager was past the 125 GB limit, and might not boot.

View 8 Replies View Related

Fedora Installation :: On Vista - Keep The Windows Boot Loader And Also Install On A Usb Drive Or A Separate Partition

Aug 16, 2009

install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"

View 3 Replies View Related

General :: Remove Grub And Restore Windows 7 Boot Loader?

Oct 24, 2010

I just made my system unbootable... Here is what i did.. I have two sata HDDs

160 GB (Contained Windows 7)
500 GB

I copied entire 160 gb as an mirrored image to 500GB HDD using Acronis Disk Director. I deleted entire 160 GB HDD.. Removed the 500 GB HDD and kept it seperate.. Installed ClearOS Enterprise 5.2 Worked a little bit... The i wanted to delete ClearOS.. So i connected 500GB HDD and booted again in Acronis Disk director Formated the entire 160GB HDD.. Copied back the entire 160 from 500GB HDD.. Now my sytem refuses to boot... Just 4 letters "GRUB" appears on the screen... I tried booting using XP CD.. It gives a blue screen.. I tried Windows 7 CD.. It says unable to fix due to MBR problem..

View 8 Replies View Related

General :: Boot Loader Failure - Windows Could Not Start Because The Following File Is Missing

Oct 18, 2010

I have a system with 2 hard drives. One drive (D) is my Ubuntu 10.04 system and the other drive (C) is my Windows XP system.

When I boot, I get BIOS then GRUB. If I choose the XP selection I am taken to a Boot Loader that now longer works. I get an error saying: "Windows could not start because the following file is missing. <windows root> system32hal.dll Please reinstall a copy of the above file.

Can I remove the boot loader and let Grub take me directly to the C:/windows? If so how?

View 4 Replies View Related

General :: Ubuntu No Longer Booting From Windows Boot Loader After Update

Feb 2, 2011

After installing recommended updates for Ubuntu, Ubuntu would no longer boot from Windows Boot Loader. It looks like an error about some missing NTFS4 files briefly flashes on the screen.

View 2 Replies View Related

General :: Windows - Deleting Linux Partition And Grub Boot Loader Without Affecting The Windows Partition At All?

Aug 30, 2011

I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.

View 2 Replies View Related

OpenSUSE Install :: Lost Windows Option From Boot Menu?

Dec 5, 2009

I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.

View 9 Replies View Related

General :: Grub Boot Loader Installation In Dual Boot Machine After Windows 7 Installation?

Mar 23, 2010

I had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.

View 4 Replies View Related

Installation :: Triple Boot Ubuntu / Windows 7 And Backtrack 4?

Aug 22, 2009

I am attempting to triple boot Ubuntu, Windows 7, and Backtrack 4. Win7 and Ubuntu are both booting and working properly, but after trying a number of configurations for GRUB I cannot boot Backtrack. Everything I attempt seems to come back to one problem and result in the same error: Error 17.

sda contains both my Windows and Ubuntu partitions...

Code:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x07dccf10

[Code].....

View 3 Replies View Related

Software :: Triple Boot Windows 7 Ubuntu Backtrack ?

Sep 8, 2010

I tried triple booting Ubuntu,Backtrack and windows 7.

I have installed ubuntu through wubi but can install seperately also

How should i proceed?

I have been scared of grub and i wanna overcome it.

View 5 Replies View Related

General :: Second Hdd Install - Boot Loader Queries - Multiboot

Sep 11, 2010

I currently have 2 operating systems on my main hdd: Ubuntu and WinXP My current setup - [storage NTFS partition, solely data][17GB WinXP partition][{extended partion}Ubuntu + swap]: [URL] I have a second SATA hdd that I would like to install Arch Linux on to. It uses GRUB Legacy, and Ubuntu uses GRUB 2. I would like to know how I would go about booting this, and figure out where my current bootloader is installed to. i.e. /dev/sda or /dev/sda5 (the / ubuntu partiton)

View 3 Replies View Related

Slackware :: Add A Second Physical Drive With Windows 7 On It To The Boot Options In Lilo?

Mar 14, 2011

I'm familiar with editing Grub's "menu.lst" file to add additional OS's to the boot list. Does Slackwares Lilo have a similar config file ? I need to add a second physical drive with Windows 7 on it to the boot options in Lilo. If it's not a config file, how do I add a second os to it ? Slack and Windows are both already installed on two different physical drives so I won't be installing, I just need to add the Windows drive to Lilo.

View 5 Replies View Related

Ubuntu Installation :: Dual Boot Using Windows Boot Loader, Not GRUB?

Nov 8, 2010

I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.

I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.

I feel like I'm halfway there, I just need to get Grub to load correctly or something.

View 8 Replies View Related

Ubuntu :: Dual Boot - Remove The Windows Boot Loader

Apr 26, 2011

One thing I notice and hope someone here can steer me in the right direction. When I start up my computer I have the list of options to choose from, if I choose to boot into Win 7 I am the presented again with another boot menu from windows. I would like to remove the Windows boot loader.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved