OpenSUSE Hardware :: Hda Intel Alc883 Does Not Work?
Apr 10, 2010
The problem is when I restart system I get that error message in notification. What I have to do to get sound work is: I go to Yast->Hardware->Sound then I edit my sound card which is intel 82801G. Then I enter auto in model section. Then next, it prompts that sound card has to be restarted. I click yes then next once again and after all of that it prompts me 3 or 2 times that kde wants to remove usused devices hda intel alc883 analog and/or digital. Then I have to start Kmix and sound works. Now after that what can I do to actually make it work w/o that procedure. Also what I noted, system doesn't want to reboot sometimes so I have to shutdown -r now.
View 9 Replies
ADVERTISEMENT
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Jun 16, 2010
I have a Gigabyte mainbord with an Intel IHC9 sound chip. When I configure it via YAST the test-sound plays fine, and when I issue:
sudo speaker-test -Dplug:front -c2 -l5 -twav
some friendly voice starts speaking as well.
But:
speaker-test -Dplug:front -c2 -l5 -twav
doesn't bring about anything sound-like.
My settings are stored at:
[URL]
View 4 Replies
View Related
Jan 26, 2010
I just did a dual boot with OpenSuSE 11.2 and Windows 7. They both work perfect but for some reason the wireless (intel wifi 5100 AGN) and my wired network card (Atheros AR8131 Gigabyte controller)do not work in opensuse. Now the problem is that I do not have a clue about linux and therefore I don't know how to fix the problem. I searched the forum and I tried these commands "sudo /sbin/ifdown eth0" and "sudo /sbin/ifup wlan0" and both says something like device not connected/present (can't remeber exactly).
View 9 Replies
View Related
Dec 23, 2010
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies
View Related
Jul 22, 2010
How can I force my Intel Atom N280 to work on powersave mode?
View 1 Replies
View Related
Jun 30, 2011
My laptop's internal microphone doesn't work. I ran alsa-info.sh to collect data about my configuration.
Code:
Since the full info dump was a little bit too big to post here, I put the file in its entirety on Pastebin. I also noticed that KMix doesn't display any inputs/outputs...
View 6 Replies
View Related
Feb 16, 2010
Where can I get the Realtek ALC883 driver for Ubuntu?
View 1 Replies
View Related
Oct 3, 2010
I'm new to the whole linux os, but since I have it on school, I decided to instal it on my laptop. everything works, accept I have no sound what so ever.. I installed Alsamixer, and nothing is muted.
View 9 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Apr 19, 2011
I am not able to get sound from any Distro on my Desktop (Realtek ALC883) ..Is there any patch to be downloaded for ALSA..Currently i tried Ubunntu 10.04 Live CD ...Request your assistance .
View 6 Replies
View Related
Mar 2, 2011
I just replaced my Broadcom 4312 card with an Intel Centrino 6200-N card. The install went fine (dmesg | grep iwl shows that it's physically installed) and the result of "rfkill list" is:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
I downloaded the most recent drivers from Intel for the 6200 and extracted the tar. I opened the .deb file: linux-headers-2.6.33-02063304-generic_2.6.33-02063304_i386.deb and it started a Package Installer. In that process an error occurred "Error: Dependency is not satisfiable: linux-headers-2.6.33-02063304." I've searched but could not find a fix for this error. I am using 10.4 and obviously my wireless is not working (but Wicd wireless is enabled).
View 9 Replies
View Related
Mar 5, 2011
In windows the only controllers that really work with TRIM is the onboard Intel ones, Jmicron, Marvell, Nvidia and AMD's don't pass the command to the drives if you use their own drivers. (And from what Ive read, the Micron sata6 controllers don't work with TRIM even using the default Microsoft drivers). In Linux do more then just Intel drives work with TRIM? I have a Nvidia 790i Ultra motherboard, the SATA controller is an Nvidia one which has 2 settings, ATA and Raid (if the drives aren't added to an array it runs them in AHCI) and has an additional Jmicron sata port.
If I enabled TRIM in the OS, would it work on either of those controllers? Also if anyone knows this, in Windows if you set an Intel controller to raid, you wont get TRIM on SSD's that are on the controller (but not in an array) with the default Microsoft driver like you would if it was set to AHCI, you only get it with the Intel RST drivers. Would a SSD on an Intel controller set to raid but not in an array get the TRIM command passed to it in Ubuntu?
View 1 Replies
View Related
Mar 28, 2011
Ok this is not a question but more or less a small tutorial to help those who have had just as much trouble or more in getting the intel driver + DRI working.
View 2 Replies
View Related
May 10, 2010
trying to get ALSA running on a mainboard with onboard Intel soundchip using the snd-hda-intel driver. aplay detects no devices and amixer says: "Mixer attach default error: No such file or directory". Tried everything from the ALSA troubleshooting manual but no success... why is the card not recognized?Here is the output of a debug script I found. Up to now I just did "configure;make;make install" with alsa-utils, alsa-lib and alsa-driver...
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.59
!!################################
[code]....
View 5 Replies
View Related
Aug 4, 2010
anyone using HP Elitebook 6930P with CentOS5.4 and successfully installed sound drivers?
sound ( ON and MAX volume) but test sound etc does not work.
View 1 Replies
View Related
Aug 18, 2010
I have some serious trouble getting the Wireless connection working, using Fedora 13 on a Dell XPS M1710 laptop which has an Intel Pro Wireless 3945 ABG adapter. I have previously tried an earlier version of Fedora I think it was version 10, where it worked flawlessly out of the box, but all versions since then, simply wont work properly. I got the Fedora 12 64 bit working at some stage, after using hours and hours trying to get it working, and suddenly it did. Don't know what suddenly made it work, since I haven't made any new changes, just re-checked the old ones. But I needed to use Skype which is only in 32 bit, so I had to reinstall to a 32 bit version, and then couldn't get it working again.
I can get it to work with any Windows version, no problems. I have also tried with PCBSD version 7.x, 8.0 and today I tried the new 8.1 just to see if that worked to, an no problemos, it works perfectly out of the box, I could set it up in 5 minutes, even though I don't have any previous knowledge of PCBSD, other than a few short trial installs.
It has to be said that I am a newbee to any Unix/Linux, so I don't know how to troubleshoot properly, and have only tried a few things which I have picked up from other forums. But unfortunately nothing seems to work. The first thing I did after a clean install was I looked in the Fedora 13 documentation, that says I should check that the NetworkManager is controling the interface, I tried to start up NetworkManager but nothing happens, no reaction what so ever. I tried rebooting and then restarting NetworkManager, but no matter what I try, I won't work, not even if I am using the root account.
I noticed right after the install, that there was a choice of connecting to a hidden network in the lower right corner of the screen, but while I have been trying to get the NetworkManager to work, it has suddenly disappeared (I have disabled SSID broadcast on my Linksys router. I've tried to run lsmod and it seems like the right firmware is running, I think it was called IWL3945 or something like that. I think there were around 3 such modules running, plus a Dell module.
Another important note, before I even touched the the WIFI, I connected to the Internet via my normal fixed LAN connection, and installed all the updates that were available and rebooted the system. I am using an LinkSys WAG354G V2 ADSL router, where I have disabled SSID broadcast. Is there a kind soul out there, who has a good idea of what the problem is, or a good idea of how to troubleshoot it ? since a laptop without a WIFI connection is not of much use to me.
View 2 Replies
View Related
Aug 7, 2011
My problem is similar to this one [URL] and I've already tried some of the steps, to no final resolution.The OS in question: Ubuntu 11.04 64 bitProblem hardware: Intel Ethernet 82567V-2 network card[URL]I've already installed the latest driver using the README instructions (sudo make install, etc).The network card will connect ONLY to my Linksys router but not even to my Motorola cable modem, even when it's directly connected to the modem ! I cannot get any web pages at all outside of my LAN, only my Linksys configuration page on my router.As I said above, I've already tried most of the steps in that forum post above. I'm going back to retrace my steps to see what else I can do
View 1 Replies
View Related
Sep 1, 2011
I have an old sony vaio laptop, and it has an intel 82801cam ethernet device and it refuses to work when I plug it in to an ethernet adapter. Im thinking it is a driver issues but whenever I list my hardware devices in terminal with lshw it seems to see that device despite that
View 1 Replies
View Related
Sep 1, 2011
I know Compiz works on my mobile 915 intel graphics (I have been using it until now with Desktop cube) but now I have external monitor hooked up extended to laptop monitor and I lost compiz - no longer works. How can I fix this?
View 3 Replies
View Related
Feb 14, 2010
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.Here what it looks like:
Code:
$ alsamixer
alsamixer: function snd_mixer_load failed: Invalid argument
I've also tried Ubuntu and OpenSuse latest LiveCDs, both 32 and 64 bit - the result is the same alsaconf does not help.I'm totally puzzled and will be gladfull for any hint.
Additional info:
Code:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 0/1
[code]....
View 9 Replies
View Related
Aug 2, 2009
My intel pro wireless 2200 NIC doesn't work anymore. Yesterday it did, but not today (I didn't do anything special, so that it could go wrong).What is ucode and -62? Any ideas? I already checked the forums and found that ipw doesn't work when ndiswrapper is loaded. Well, I don't have it loaded. What happend?
View 8 Replies
View Related
Mar 13, 2010
changed my computer to PC with intel motherboard and Pentium IV the problems with wifi started. OS (Linux and Windows) see the device, connects with netwoks, but it is impossible to surf the net or even ping my gate (over 90% packets lost). I have tested it with Debian Leny, Ubuntu 7.1 and 9.04, OpenSuSE 11 and Windows XP, I have tried several drivers, changing slot.
View 2 Replies
View Related
Jan 1, 2010
My Xv doesn't work in Karmic. When I use Jaunty it works well. How can I turn it on
Code:
xvinfo
X-Video Extension version 2.2
[code]...
View 1 Replies
View Related
Mar 16, 2011
I'm going to do a fresh instalation, I have an Intel Core 2 Quad, so I'm tring to get the 64-version from [url]but the file says "amd64", will this work for me?
View 2 Replies
View Related
Apr 18, 2011
I am currently running Lucid 10.04 Ubuntu through Wubi and am having MAJOR problems with my webcam. I can use this webcam on windows vista without a problem and very nice picture quality, but when I try and use it on Ubuntu I run into some snags. The webcam is connected and works, kind of, on "cheese", but when I run a test on skype it is just a black box.I have found some code through the forums that allows me to run skype via terminal and will let my webcam work as well as it will on Cheese. Now, when it does run the picture is very blue and dark as well as extremely laggy compared to when ran on Windows Vista.
View 4 Replies
View Related
Jun 12, 2011
I want to add a second monitor to a computer with existing onboard Intel 965 graphics. The Intel graphics work great so i'd prefer adding something old for a second monitor (just to throw some toolbars on it) instead of installing ATI / nV card (which will disable the Intel graphics). I added an old PCI (not PCIe) Cirrus Logic GD 5440 Alpine for the second monitor (so that it won't disable the Intel). This card is capable of 640x480 w/ 256 colors (actually more, but I don't know how much more it will go. It has like 1MiB memory)
Now I set it up like this:
/etc/X11/xorg.conf.d/20-cirrus.conf
Code:
Section "Device"
Identifier "CirrusCard"
Driver "cirrus"
BusID "PCI:4:0:0"
EndSection
/etc/X11/xorg.conf.d/20-intel.conf .....
All the additions to the cirus (modeline etc) were added when experimenting, but did not change the errors. X fails to start in all configurations I tried here:
Xorg.0.log
Code:
[987.177]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[987.179] X Protocol Version 11, Revision 0 .....
View 2 Replies
View Related
Mar 9, 2011
My understanding is that there is no Optimus support for Linux at this time.Will a default CentOS installation work fine with just the integrated graphics.in other words, will Optimus and the discrete graphics be ignored? Will OpenGL still work correctly with the Intel integrated graphics?I am considering an i5-based laptop with Optimus support, where I might go with a dual-boot configuration.
View 1 Replies
View Related
Jun 7, 2011
I just installed Fedora 15 yesterday and can't get wi-fi to work. When I click 'on' on the Wireless label, it goes back to 'off' immediately. When I open the Network Settings menu and disable Airplane mode, the Wireless connection goes on and then off immediately. I took a look at /var/log/messages and it shows this:
[Code].....
View 5 Replies
View Related
