OpenSUSE Hardware :: Intel HD Graphics (Intel Core I3) With Suse 11.3 - Poor Resolution
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
ADVERTISEMENT
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Nov 25, 2010
As this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.
The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:
Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....
View 9 Replies
View Related
Apr 16, 2010
I am running kubuntu 9.10 on a dell inspiron 14 with an intel GM45 graphics card. When I run 3d games like Nexuiz, openarena and tremulous I get really random performance. Sometimes things are totally playable with somewhere between 50-80 fps and other times I get maybe 4 fps and everything takes forever to load. These effects persists between logouts, X restarts and reboots! I get no errors when I run things in console either.I never really play games much but when something doesn't work...
View 8 Replies
View Related
Aug 19, 2010
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
View 9 Replies
View Related
Mar 12, 2010
I'm stuck at 800x600, and no matter what i try i seem to hit a dead end. I've got the Intel Mobile 945GM/GMS rev 03, and it seems like lots of people have had to fiddle to get it working. Here's the info I've collected and tried so far. Ubuntu Edgy On Intel 945GM Graphics & Wide Screen LCD NoteBooks � 100% Linux Addict
HOWTO: install drivers and set up widescreen res. with Intel 945 vga card and Ubuntu - Ubuntu Forums Mostly Harmless: SuSE, Acer aspire 5580 and non-standard resolution 1280x800 Intel 945gm And 1280x800 Laptop Monitor Problem Suse 10.2 - openSUSE Forums I'm not too proficient with linux yet, so the right solution might be here and I'm just not getting it right. Maybe i'm not on the right path at all.
View 9 Replies
View Related
Nov 22, 2009
After install F12 on a clean install, I can't change the display resolution, my graphics card is a Intel 82945G/GZ, my monitor is a LCD 32" TV
I follow this steps:
Quote:
Then I edit the xorg.conf file with this code:
Quote:
But nothing, I still get the 800x600 resolution and I can't change it.
Is this a driver bug?
View 14 Replies
View Related
Sep 11, 2011
Got this new motherboard and it's running 11.4 of Opensuse and it works great. Even got the DVI working with the monitor with help of instructions I found here. However the sound is poor and the volume controls just as bad. According to the motherboard docs it has THX Tru Studio sound pro, a Intel H67 (B3) chipset. Six audio ports. And the chipset integration by Realtek ALC837. I have tried to find this information in the sound setup with no luck. What was selected was the Intel model (no other specifics was found). According to the Alsamixer it says HDA Intel PCH and the card and chip is set as PulseAudio. What should the sound card be set to other than Intel?
View 3 Replies
View Related
Dec 31, 2010
I have recently switched from suse 9.2 32-bit to 11.3 64-bit (luckily I'm still mantaining the old machien for a while).I'm noticing that the graphics quality of the applets displayed by the new firefox (3.6.12 bundled with the opensuse distro) is significantly worse (mainly concerning fonts which look very poor) then the one I used to have on the old system.I see that the new firefox uses IcedTea 1.9.2. The old system was using, I guess, something called libjavaplugin_oji.Is this a known problem with IcedTea and is there a recommended replacenent ?
View 2 Replies
View Related
Dec 26, 2009
I'm about to upgrade a server for a local non-profit, and am looking at a Gigabyte GA-P55-UD3L motherboard and an Intel Core i5 750 processor. Does anyone have any observations or experiences with SUSE on this platform?
View 7 Replies
View Related
May 8, 2010
I installed 11.2 on a Lenovo G460
CPU: Core i3
Graphic: Intel HD 4500
And I got a black screen. Installation media (DVD) is healthy.
View 1 Replies
View Related
May 22, 2010
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
Code:
hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42
[code].....
View 7 Replies
View Related
Aug 24, 2010
My system occasionally, not often, but enough to bring me to do something about it, keeps freezing. Hard lock-ups. This is a known bug for openSUSE 11.3 and intel video cards. So, I tried some suggestions and updated my kernel to 2.6.35. Nope. Same prob. I updated Xorg, mesa, drm, cairo (had to go to Factory for that one). I finally got all the requirements met as listed on Intel Linux Graphics: 2010Q2 and I download the intel 2d driver, since it's newer than what comes with openSUSE, even in Factory (xorg-x11-driver-video-intel-legacy 2.9.1).Now, when I go to compile the driver, it errors out on ./configure.how do I let this intel driver package know where xorg-server is?
View 3 Replies
View Related
Mar 7, 2011
I would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.
View 7 Replies
View Related
Mar 19, 2011
I've been using Mandriva (and predecessors) for ten years or so, but that distro really seems to be dying at the moment. Consequently, I am trying to move over my various PCs to SUSE. I've started with my EEEPC 901 which has a 945GME integrated graphics chip. Using Mandriva 2010.2 it works fine and I can have desktop effects (built into KDE) running with no problems. However, with KDE on openSUSE 11.4 I get irregular freezes, although I can still work within the focussed window. Moving around though, clicking on other parts of the desktop etc. doesn't work, then after a few seconds they all happen at once. I am getting the following error multiple times in the X log, which I suspect is associated:
Code:
EQ overflowing. The server is probably stuck in an infinite
loop.
I note this supposedly fixed bug report that may be relevant:[URL].. Secondly, I am getting hopeless 3D speed (glxinfo reports SGI and has all expected output). Desktop effects won't work at all, on boot it pops up a message saying they are disabled as too slow. I know it isn't a benchmark, but glxgears gives about 50, it used to give over 500. I remember a few X versions back having to enable UXA mode instead of EXA in the 'intel' driver, but presumably that is no longer needed and I cannot see any effect of doing that now (in the xorg.conf.d device file). According to the X log, X is definitely using 'intel' driver, not fb etc.
View 9 Replies
View Related
Jul 16, 2011
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Code:
[ 229.187]
X.Org X Server 1.9.3
[code].....
View 7 Replies
View Related
Mar 12, 2011
I'm using openSUSE 11.4 KDE upgraded from 11.3. No nonstandard packages that I know of. I get this error messages on boot :
Code:
grzes@opensuse:/etc/init.d> sudo cat /var/log/boot.msg | grep '*ER*'
<3>[ 2.408570] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.665563] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.668069] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
<3>[ 2.668073] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
I was wondering why is this happening. I didn't get those on 11.3.Just to add my openSUSE boots normally and seems to work as expected. My graphics card/driver combo is :
Code:
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
Subsystem: ASUSTeK Computer Inc. Device [1043:1862]
Kernel driver in use: i915
View 2 Replies
View Related
Aug 19, 2011
I recently installed openSUSE on a new Toshiba and i'm getting very choppy video while watching videos on ....., justin.tv, etc. The video is fine as long as I don't full screen. However, when I try to fullscreen a stream on justin.tv or a ..... video, it instantly becomes choppy and video is extremely delayed in relation to the sound. The sound still continues at it's regular pace, however the video lags behind and is just choppy in general.Also, not sure if this helps, but i'm running an i3 2310M.
View 5 Replies
View Related
Jun 17, 2010
I want to change the motherboard and the CPU from an installed SUSE 10.3 Kernel 2.6.22.18-0.2-default from an AMD CPU and mother board to Intel quad Core CPU, and when I do so it doesn't boot. any idea of what can be the problem
View 3 Replies
View Related
Dec 30, 2010
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
View 9 Replies
View Related
May 17, 2010
I can't set up the native resolution for the LED monitor of a Dell Inspiron 1564 laptop with openSUSE 11.2.YaST2 lists correct the graphics adapter as: "Intel Arrandale Integrated Graphics Controller" and the monitor having the resolution: 1366x768 However in /etc/X11/xorg.conf lists only modes with a 1024x768 resolution, which are not really "sharp" on the monitor Besides that it lists the Device as "Vesa-BIOS Graphics". Starting sax2 does not provide me with any option to change these settings (at least not in the graphics mode).
View 3 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Aug 20, 2010
I've read that you can use specialized kernels for your hardware, and I was wondering if there's a kernel I can use for my Intel Core 2 duo. I read in a previous post about using a "smp" variant, but kinda wanted some confirmation. Here's CPU info:
Code:
processor : 0
vendor_id : GenuineIntel
[code]....
View 1 Replies
View Related
Dec 14, 2010
Can someone tell me what the architecture of iMac Intel Core 2 Duo is? I am trying to figure out which of the following images given on the webpage below to download:[URL]..This is the list:
[alpha][amd64][arm][armel][hppa][i386][ia64][mips][mipsel][powerpc][sparc][s390][source][multi-arch]
I think there are two different images (namely i386 and ia64) for intel-based systems, right? Which one should I download for my Intel Core 2 Duo? Is this a 64-bit architecture? Should I use amd64?
View 10 Replies
View Related
Aug 24, 2011
What is the best debian iso that I should choose to install in a machine with intel core i7 second gen processor? amd64,ia64 or i386 ?
View 4 Replies
View Related
Sep 19, 2009
This is a general technical question about Symmetric Multiprocessing in relation to the Intel Core i7. (Actually, it's more about Hyperthreading than i7.) My understanding is that Symmetric Multiprocessing means that the operating system treats all processors as identical, and therefore it can assign a new thread to any free processor.
And that i7 appears to the OS as 8 processors, 0 thru 7. But from a performance perspective, the 8 processors are not identical, because each core has 1 execution engine plus the ability to store the state of 2 threads. This is, as far as I understand it, the essence of Intel's Hyperthreading. So each execution engine can quickly switch between 2 threads without bothering the OS, but only one thread at a time actually executes.
Suppose, for example, all processors are idle and the OS assigns one thread to processor 0, then has a second thread to assign. Since all free processors are considered identical, the OS could assign the second thread to any free processor, say 1. The result would be that both threads are competing for the same execution engine, while the other 3 cores remain idle. Is my understanding of SMP correct?
If so, does linux SMP take full advantage of Intel Hyperthreading (which existed also in earlier Intel processors)? That is, does linux SMP assign threads in such a way that it attempts to choose an idle execution engine? I don't know what algorithm SMP actually uses to choose the processor. For example, it could be the first free processor, or any free processor chosen at random.How about Windows? How does it handle the situation?
Edit: I have also posted this question in linuxforums and phoronix forums. I hope this doesn't count as cross-posting, since those forums are not on this site and they have different readership. If it is indeed cross-posting, please let me know and I will avoid doing it in future.
View 2 Replies
View Related
Mar 28, 2010
Which architecture to use with an Intel Core 2 Duo processor?
View 3 Replies
View Related
Dec 28, 2010
I have a new hp g62 notebook pc with intel core i5 m469 @ 2.53 GHz, 64 bit operating system. I wish to use GCC to develop for msp430's, arm7/9. Which distro would work best for this hardware?
View 2 Replies
View Related
Aug 22, 2011
the appropriate debian designation that will work on an Intel Core i5 430 M processor.
View 2 Replies
View Related
Mar 8, 2010
I'm a Linux Mint user, but I'd like to cross over to Debian. I used the x86 architecture for the Mint install, but I couldn't find that anywhere on the Debian site. what the architecture for the Intel Pentium D dual core is?
View 2 Replies
View Related
