CentOS 5 :: Intel SoundMax Drivers Does Not Work?
Aug 4, 2010anyone using HP Elitebook 6930P with CentOS5.4 and successfully installed sound drivers?
sound ( ON and MAX volume) but test sound etc does not work.
anyone using HP Elitebook 6930P with CentOS5.4 and successfully installed sound drivers?
sound ( ON and MAX volume) but test sound etc does not work.
where to find ODBC drivers for CentOS 5.5 to work with Perl 5.x (preferrably free)?
View 2 Replies View RelatedMy understanding is that there is no Optimus support for Linux at this time.Will a default CentOS installation work fine with just the integrated graphics.in other words, will Optimus and the discrete graphics be ignored? Will OpenGL still work correctly with the Intel integrated graphics?I am considering an i5-based laptop with Optimus support, where I might go with a dual-boot configuration.
View 1 Replies View RelatedI verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
I'm trying to get the NVIDIA drivers to work with xen but i still get it bombing out although I export IGNORE_XEN_PRESENCE=1. the error relates to some variables in nv.c nor being declared. I compiling against 2.6.18-164.el5xen with the NVIDIA-Linux-x86-185.18.36-pkg1.run driver.
View 2 Replies View RelatedWireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
I have been so happy using Debian Lenny. But just lately my sound has disappeared. I have checked the system and apparently it is SoundMax Integrated Digital Sound that I have on board. I have tried lots of things to get it going but to no avail. I have the Debian CD's. Is there a chance that it might be on these and I could re-install it?
View 2 Replies View Relatedi'm a true newb with ubuntu. I've tried to find online how to get my graphics card up and running but all the places i check are way over my head. I've been a windows guy forever. Basically the graphics work on my laptop but won't do anything 3d right now. This makes me think i'm not using a correct driver. I've got no clue where to dl the from the ubuntu interface or what to do.
View 9 Replies View RelatedA recent update made my intel 830 unusable with kernel modesetting enabled, so I disabled it. However, I get "No kernel modesetting driver detected" errors when I start X with the intel driver. Is there a way to make the intel driver not require KMS?
View 2 Replies View RelatedWhere I could get Intel 3945abg wifi drivers for ubuntu?P.S. Sorry for wrong forum, but I can't post in networking forum.
View 3 Replies View Relatedwhen I boot into Fedora right before the login screen I get a black screen with a command line.How can I uninstall the drivers and get it work again without ATI Drivers? I have switchable graphics and for Fedora have to switch them in the BIOS but with integrated as well as discrete graphics I get the same black screen.I have the LiveDVD ready and only need advice on howto log in in text mode or recover via LiveDVD.
View 1 Replies View RelatedFeel stuck between Debian and BSD worlds - not sure where to turn.
Running GNU/kFreeBSD debian 8.1-1-amd64 and base system working. Can not get X or xrandr to co-operate and use proper resolution of 1680x1050. I believe the basis of this is that it using the VESA drivers and instead should be using the INTEL drivers.
I have no 'pkg_add' for ports, plus obviously no Debian repos will help for this .... unless there are some specific kFreeBSD repos I dont know about? I can post more details on the system, but am hoping that there are other options besides compiling. I can do that if need be, but not even sure which one to use. Will these work on this system? [URL]
user@debian:~$ uname -a
GNU/kFreeBSD debian 8.1-1-amd64 #0 Mon Feb 21 22:03:13 UTC 2011 x86_64 amd64 Intel(R) Pentium(R) 4 CPU 3.00GHz GNU/kFreeBSD
user@debian:~$ lsb_release -a
No LSB modules are available.
[Code].....
I have a new netbook, a Lenovo Z360 and everything except one thing works "out-of-the-box". The one thing is the brightness control. I think it's the same bug like in https://bugs.launchpad.net/ubuntu/+s...ux/+bug/538256 But I don't get anything in dmesg, it's just not working. setpci -s 00:02.0 F4.B=?? don't work, too. nomodeset acpi_backlight=vendor don't work, too. I'm using Fedora 14 with KDE, 2.6.35.11-83.fc14.i686 and the intel drivers. Maybe somebody knows a workaround, usually brightness control works very well in the newer distributions. I had like 4 notebooks all with Fedora installed and brightness works, especially with the open source intel drivers I didn't expect any difficulties.
View 10 Replies View RelatedI'm getting a Dell XPS laptop soon and it comes with Intel Centrino Wireless-N 1030 and I was wondering if anyone else has this chipset and how well supported it is under Fedora or Linux in general.
View 1 Replies View RelatedI made a kernel module package for opensuse 11.2, kernel 2.6.31-12 (latest update at time of writing). It supports opengl (glxgears has 2000 frames in 5 s), 2D is faster than by using vesa only. But compiz/kwin effects dont work. Open Arena works but is not as fast as under windows xp. I think its a xorg.conf issue.
[Code]...
I installed Maverick earlier today on a Dell XPS M1210, and everything works beautifully, except for one thing: the wireless card. It is an Intel 3945ABG wireless card, and I've tried searching around and have found nothing,
View 7 Replies View RelatedI am totally new to Ubuntu but have been tinkering for a week now. Can't say I have figured a thing out, thank God for Google, Linux is just not for the novice user. I guess thats where Windows comes in but I really like the stability of Linux and the fact it is Open Source and free. Wish I was a cool programmer or someone who has worked with the OS for a while, that would make things a lot easier. Where can I study up and get a little more educated about what I am doing? Anyway hopefully someone can answer the driver question. Lastly is there anyway to get Hardware Acceleration if using an Intel i5 system?
View 3 Replies View Relatedneed to upgrade my intel graphics drivers for Compiz Fusion (3d desktop effects) suse linux 11.1 kernel:- 2.6.27.7-9-pae my hardware configuration is as follows intel dg41rq motherboard 2gb kingston ram intel dual core cpu 2.5 ghz current graphics drivers:- 4 series chipset integrated graphics controllers
View 6 Replies View RelatedHow is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
View 1 Replies View RelatedI had to send my laptop back for repairs, so I have an older Dell 1720 laptop that I threw the Hard Drive into, similar specs, just the wireless card is different. So what i need to do is somehow activate the driver for the Intel 3945 wireless card in this dell laptop.
View 2 Replies View RelatedSo I decided that I would swap over to Slackware on my HP dv2000 notebook as Linux mint wasn't encouraging me to use the command line too much and I decided to get thrown in the deep end with the scripting side of things.
Basically I can't work out how to install WCID off the Slackware DVD, I have gotten as far as extracting it (extracted to /home/ but I am unsure how to execute it, I have read the install docs and can't make much sense of it, could someone possibly help out and pass on the code to install.
for some reason the drivers for my laptop graphics are not showing up.
The laptop I have is Acer 1810T. It has intel GMA 4500MHD graphics.
I also have a desktop which has Nvidia 9800GT graphics card and the drivers for that showed up automatically when i went to additional drivers in ubuntu.
Having trouble with video and windows/links/applications etc on 10.10, just came from windows 7 with everything fine. had 10.04 on my desktop with nvidia card, was easy to get that driver installed, but intel i cant find the correct information. on a laptop, compaq presario cq56. can anyone help out?
View 7 Replies View RelatedI just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies View RelatedI have an intel DP35DP motherboard - ICH9 southbridge - set to AHCI mode. Working fine under 5.2. Yesterday I updated to centos 5.3, and got kernel 2.6.18-128.1.16 and now it can't boot. It hangs trying to read sata1 with DRDY errors and exceptions.So then I installed 5.3 from a DVD onto a new drive, and got kernel 2.6.18-128. This worked, most of the time, but occasionally gave me this error. I then updated my BIOS, and the error went away.Then I updated this new working drive to the latest kernel (yum update again) and got kernel 2.6.18-128.1.16, and now it wont boot again, with the same message.
ata1: failed to read log page 10h (errno=-5)
ata1.00 exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: cmd 60/08:00:61:4b:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
ata1.00: status: { DRDY }
ata1.00: revalidation failed (errno=-2)
ata1.00: revalidation failed (errno=-2)
[Code]....
I've a Centos 5.1 server on S5000vsa Intel board with 6 bay HD in raid 1 mode (2 HD), and working fine until I've decide to make a yum update. Today the Centos is 5.4 but seems necesssary to upgrade the megasr driver for the raid function (i.e. , is not possible to contact the raid firmware trought Web Console 2). I've download the last megasr driver from Intel and I follow the instruction to upgrade the driver with s.o. installed, but when I start the server and choose via grub the new img boot file, the display show :
megasr.ko invalid module format -1 and stop. The linux version is the same in the machine (uname -a) and from the driver (2.6.18-164.9.1.el5). Another question : in Intel instruction spoken about megasr.o , but on img file I found a megasr.ko . I think instructions referre to old linux 2.4
I wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
I installed centos 5.1 in my system, it installed perfectly, but when I am trying to install centos 5.2 then it is not let me install.
My system has 220 SATA HardDisk Intel Core 2 Duo 4 GB RAM Intel Desktop Board DG41TY when I try to install centos 5.2, it show me menu bar After hit enter key to install centos 5.2, it show me loading usb drive and then showing some strange font. System is hang after this Can you please tell how I install centos 5.2
i want to change my server to a intel d510mo withoutchanging the installation.The old nstallation runs on a centos 5.4 asus amd board witha sata raid, sata-sil adapter in no raid modus.and that is the problem.i boot the centos on the intel board, and only the sata-sil module is loaded, so noata drive is found.How can i change this? udev? i disabled the scsi-hostadapter in modprobe.conf, but no
View 1 Replies View Related