Had no printing problems with 11.1 but upgraded to 11.2 and now have no printer. Have tried installing via usb and lpt. Keep getting "foomatic-rip failed" msg. Yast shows it as installed and waiting for jobs, but can't even print a test page. Troubleshooting info as follows:
[code]....
I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---
System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---
[code]....
OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".
(I'm probably going to have my forum account revoked due to excessive usage ) I'm setting a VPN connection on openSUSE 11.2. Using the networking icon on the tray I add a PPTP connection, set it up but I receive a message 'VPN connection failed'. Googling it up I tried changing a setting called 'refuse-eap' to 'yes' but it doesn't seem to work. Here's the result from the log file:
[code]...
I finally did it. I took the plunge and moved away from MS and installed openSuSe on my system. I have a Gateway 650 with 160 MB of ram and yes it did install! To top it all off it also boots to Windows XP. This was all working fine until I < me < myself < yes I am a gonna admit >>USER ERROR<< booted the system into windows and I decided to see if my system needed to be DEFRAGGED. Yup I did.. I ran the defrag on the system and when it was all said and done my NTFS file system was all nice and pretty no more fragmented files.
So I decided to reboot the system to see that wonnerful boot loader of openSuSe and I chose the 11.2 to boot to and I get the message that the previous installation failed and it starts to run the script to "fix" the installation. It hangs on around 4% the installation. I hit ctrl alt del and it boots into the openSuSe partition and it seems to be working, but I have that durn annoying screen of the "previous installation failed". Are there any ideas on how to as my GF 4 yr old daughter says "flix it"? Or do I have to go through the PAINFULLY SLOW installation again?
I have Lucid. I opened Synaptic and tried to install the 'foomatic-gui' package, but it shows an error message of "unresolvable dependencies". The error is "foomatic-gui: Depends: python-gtkhtml2 but it is not installable". I serached in Synaptic for this 'python-gtkhtml2' package, but can not find it. Then I searched the [URL] site and found that the 'python-gtkhtml2' is available for intrepid, jaunty and karmic but not for lucid. How can i get this package installed?
View 2 Replies View RelatedHow can i install foomatic-rip-hplip in Mandriva?
View 10 Replies View RelatedI cant print html files using linux mandriva (Foomatic)
View 5 Replies View RelatedI have found this link "Login Failed" message when logging in through RDP
I am suffering from exactly these symptoms. Can anyone suggest what the likely cause is? How would that bug/solution relate to my environment: openSUSE 11.3/xrdp 0.4.1-85.1?
And lastly, how can I find out if the update implied under "Additional Information" has happened?
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI need to connect to my company through a Cisco VPN. The Cisco client fails to build so I thought of using vpnc. I used Network manager (NetworkManager-vpnc is installed). However after setting everything up and then logging in, I get the 'VPN Connection Failed' message.
View 14 Replies View RelatedMy fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
[code]...
the laptop of my friend runs ubuntu through wubi. The system suddenly freezed and she restarted it manually. After doing a check disk and automatically repaired some packages(unfortunately she doesn't remember what exactly, only just inode information appeared), she can't log in as when she types her username and password the answer is authentication failed. We tried to change the password through recovery mode but nothing happened.
1. Do you have something to propose to solve the login problem?
2. If not how can i access and back up her ubuntu documents through windows?
10.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:
BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)
My Redhat 5.3 desktop running on an AMD 64 system was not receiving the updates from rhn until a few days ago when it started checking in and downloading updates. The updates crashed generating bug reports. I tried running yum-complete-transaction command, it aborted also. I found a knowledge base article with instructions on how to rebuild the rpm database which I followed. After completing the procedure I tried to reboot. The system gets to the logon screen and then I get the message Authentication Failed and the system locks up. The commands I ran are:
rm /var/lib/rpm/__db*
rpm -rebuilddb
yum clean all
I am also seeing a message during boot up that the module libxml2 is missing and when I try to download the package from rhn yum cannot find the server.
I boot EPC 1000h from usb(Fedora-12-i686-Live). it shows msg at the point about "drm-model-rmfb". ...than it "sleep forever".
View 2 Replies View RelatedI am sending message from linux to windows system as follows echo "test"|smbclient -M <IP Add>But I am getting "session request failed" message . How can I solve it? <Ip Add> in network and reachable.
View 1 Replies View Relatedsend email i got bouncing error .see below error;
554 Your access to this mail system has been rejected due to the sending MTA's poor reputation. If you believe that this failure is in error, please contact the intended recipient via alternate means.
i have a domain where i can send emails to any domain ,unfortunately i cant receive email from any domain . am getting the below error ;
T=remote_smtp: retry time not reached for any host after a long failure period
Firstly I am new to red5 and not very strong when it comes to linux. I have had installed red5 on my dedicated server and going by the http://myIP:5080/installer demos it is all working fine. My problem is I cannot get it to work with my software being flashchat. I am not sure if it comes from me using the incorrect RTMP url and if so after trying about 20 or more ways of typing it in I always get the same error message "Connection Failed' or "Connection Closed" not to sure what is meant by Closed as to whether it's working but can't get in or what ever. I am after someone who can get this to work for me please and I am willing to pay for that service once it is working.
View 2 Replies View RelatedOur server is a x86_64 centos 5.5 computer. we installed samba3x-3.5.4-0.70.el5_6.1.x86_64.Samba seems work fine, we don't notice any problem in using it. But in the workstation log file, there are a lot of error messages like:
[2011/08/26 14:37:57.682260, 1] smbd/service.c:678(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
[2011/08/26 14:37:58.194394, 1] smbd/service.c:678(make_connection_snum)
[code]....
I just having to do a fresh install and get the following message to close after setting up
partitions and on clicking write to disk:
Failed to mount "524M Volume"
Method "Mount" with signature "ssas" on interface
"org.freedesktop.Hal.Device.Volume" doesn't exist.
Only option under message is close button. I'm using Fedora 14 xfce 32bit live CD. The install seems to carry on normally until done but then when I check the partitions I've setup I seem to only have the origonal uneditted default partitions.
I am using Fedora 12 with HP 1020 Laser Jet. Plugged printer in and installed it. Now it doesn't want to print, it gives me a printer state message: /usr/lib/cups/filter/hpcups failed.
I have tried to reinstall hplip but it is the same.
Connect debounce failed port 3 disabled. i get this in the terminal (alt+f1) every time i log on. i like this terminal better than the standard one and i want the error message to stop appearing every time i try to type something.
View 5 Replies View RelatedI need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message
I ran Movie Player to play .mov file, but it generate the following error message:
pa_stream_writable_size() failed: Connection terminated
The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
I am working with linux special edition LXFS Installed everything from the disk, works all fine but sometimes Linux shuts down suddenly and the following message appeals on a black screen. ' (proces 271) GLIB - warning getpwuid_r() : failed due to unknown uster id co) ' When I restart the computer everything is OK again. but than later it happens again.
View 1 Replies View RelatedWhen I try to upgrade, I always get this message: "E: /var/cache/apt/archives/linux-image-2.6.32-5-amd64_2.6.32-35_i386.deb: failed in write on buffer copy for backend dpkg-deb during `./lib/modules/2.6.32-5-amd64/kernel/drivers/net/s2io.ko'"
View 14 Replies View RelatedSubprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies View RelatedI'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?