I am working with linux special edition LXFS Installed everything from the disk, works all fine but sometimes Linux shuts down suddenly and the following message appeals on a black screen. ' (proces 271) GLIB - warning getpwuid_r() : failed due to unknown uster id co) ' When I restart the computer everything is OK again. but than later it happens again.
View 1 Replies
Just reinstalled Opensuse 11.4 and after about 20-30 mins the screen goes black and shuts down
View 7 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedI'm using ubuntu 10.04 and it worked fine but recently I'm getting the following message -
(process:343) GLib_Warning** : getpwuid_r(): failed due to unknown user id(0).
This message comes with a black screen and then no key stroke works and everything totally freezes. then I've to force restart using power switch. This message appears when I'm using internet. I'm using pppoe broadband connection. Without internet it works fine. I'm getting the same prob in Linux Mint 9. I've googled for this problem and almost everywhere it is said that this message appears in booting time and after a few moments everything becomes quite ok but my problem doesn't match with them. I don't get this message in booting time. I get this message when I'm on internet.
Was running Server 8.04 with graphical desktop - no problems. Wanted to upgrade to 10.04, so ran sudo do-release-upgrade --proposed
Upgrade was successful (although so much stuff scrolled by, it's hard to tell if something errored along the way).
Server rebooted and a dark maroon screen said 10.4 is booting, ntp service started etc. and a scrolling series of dots.
Then got a sky blue patterned login screen, so I logged in. Screen then went black, with a movable mouse pointer.
If I do Alt-Tab a panel pops up saying ** NO WINDOWS **
Using Ctrl-Alt-F1 (iirc) got me a command prompt, so I logged in there and ran: startx
This gives me the message:
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again
So checked runlevel (who -r) and that was set to 2. Changed /etc/init/rc-sysinit.conf so RUNLEVEL=5
Rebooted, logged in again, still got black screen + mouse, and **NO WINDOWS**. Logged into terminal and runlevel=5.
Also tried running dpkg-reconfigure xserver-xorg but that returns immediately without anything apparently happening(?).
how I can get my KDE graphical environment back up ?
F9 has been running great since it came out. I read that one should install F10 before F11 so I did install F10! Everything went great.
(1) Then I tried to install the F11 iso dvd. After the "anaconda started" message at the bottom of a blue screen, the screen went blank and occasionally the message would appear: "cannot display this mode 2:dvi-d". Thinking the monitor had gone into power save, I hit many keys and moved the mouse to no avail.
I gave up! BTW I had checked all media CDs for errors.
(2) then working under F10, a little message appeared from the lower right of the screen asking if I wanted to upgrade to F11.
I accepted and again "cannot display this mode 2:dvi-d" on a black screen after anaconda started on a blue screen. This time no ISO DVD F11. I've never seen such an error message in 11 years (off and on) of using Linux. HD Disk activity was showing on the disk activity light so I let it run all night and part of today. I hit a bunch of keys and moved the mouse and the blue screen returned saying all was done and restarting.
After restart, I seem to have F11 installed. I did a yum update and got some more F11 updates. On the grub screen, the only F11 kernel was the PAE kernel which I selected
and got:
Does F11 have any F11 kernels? BTW running >setup (hd0,0) under F10 grub ruined my XP prof OS on scsi 0 so I reloaded XP Prof from scratch.
Questions:
(1) what is this "cannot display this mode 2:dvi-d"?
(2) Now I cannot boot to Fedora 11 and all the advice on how to reinstall grub has failed failed. Did a rescue and chroot /mnt/sysimage and the fdisk -l
Now XP Prof seems to be on /dev/sdc and Fedora on /dev/sdd. What do I do? In the meantime I have retreated to Fedora 10.
I decided I wanted to give ubuntu a go by installing it on a 4GB USB drive.
I installed it using this guide url.
I booted up and it hung on the 'mounting file system', I left it for ages and eventually it goes to a black screen and prints out an error message, I can't type anything on my keyboard.
if I reboot the computer, I get the grub menu and am able to choose between Win7 and Fc15. A couple of times during installation the screen flashed black and diplayed a message for a brief second. I can't read that fast but it says something like "DRM nouveau- unknown or unsupported chipset" and one more line that I can't catch. When this happens, I see the pre-login loading screen, the one that shows an icon of a hard drive, network, and so on as each resource is secured. I can log back in, but this starts a new session- it doesn't remember what I was doing. I had to redo the install and setup several times because of this.
I can log in and so on normally, but the black screen and message will appear at random, forcing me to start all over, which is really frustrating. what's going on? Is it the video card? How do I install a driver for it? Also, the hard drive in question has been through a lot. could it have a bad sector or something? Windows didn't even want to "see" it, that's why Fedora is installed on there.
3/4 of the way through the install the reboot black screen : The disk drive for / is not ready yet or not present continue to wait; or press S to skip mounting or M for manual recovery . neither works, was running Ubuntu 10.4.
View 1 Replies View RelatedI have the normal OS choices menu (Windows XP or Unbuntu) but when I choose ubuntu I get an instant flash of an error message on a black screen so quick I cannot read the whole thing but I caught "error" and "format" and then the computer reboots. I have no problem getting into Windows.
View 5 Replies View RelatedI tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I just got an update notice two hours ago and after updating I rebooted my machine to find that it no longer boots. The update was for 23 bug fixes for Nvidia drivers and Nvidia support software. I get a black screen with the message "serial8250: too much work for irq17" and a blinking cursor. How do I recover from this?
View 14 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View Relatedi was watching some videos on videos in fullscreen and after being idle the screen turns off. is there a setting to change this or do i have to disable putting the display to sleep in the power manager?----- edit -----i forgot to mention that i am using ubuntu classic. also, i disabled putting the display to sleep in the gnome power manager, but the screen still shuts off if the system is idle. guessing that the gnome power manager isn't actually in control.
View 3 Replies View RelatedI've been running Debian 8 jessie at the screen's native resolution (1280x800) via the following hack: [URL]
What's bugging me is that at random intervals, my screen shuts off while the laptop is still running, forcing me to hard reset.
running xubuntu 10.04 on an older machine and no matter what the power management settings, the monitor keeps being turned off.Is there any other way (command line, maybe) to completely turn off the monitor power management?
View 3 Replies View RelatedI installed ubuntu on one of my computers and loved it so i put together another computer the motherboard did not have a build in on board video card so i put in a ATI (graphics by rage) 128pro graphics card, and wen i run the instalation of the O/S after it says batterie check [ok] the screens sorta shuts off i guess and does not trurn back on, its a desktop computer 1.6procesor 512mb ram, and was working previously with a win xp.
View 1 Replies View RelatedSo I have been at this problem for most of the morning and I have run out of ideas: I want to convert and mp4 to avi, and having uninstalled ffmpeg, winff and all other dependencies and followed the fabled guide[URL].... to install a complied version of ffmpeg, I keep on getting this error when trying to convert:
Code:
major_brand : isom
minor_version : 512
compatible_brands: isomiso2avc1mp41
creation_time : 1970-01-01 00:00:00
encoder : Lavf52.84.0
[Code]...
I installed Kubuntu 10.04 last couple days ago. Yesterday I installed some package software. After reboot, I had problem to login in GUI in Kubuntu. I tried few solutions in web I found,
Now It became more worse ! After BIOS - show this error message
error : unknown filesystem
grub rescue>
I am fairly new to linux and my laptop froze so I rebooted it and now I have this error. I have tried to load the files needed using the prompt but nothing seems to work so here is my bootinfoscript thing. Any way for me to reinstall ubuntu over the sda5 partition but keep my files?
Code:
Boot Info Script 0.55 dated February 15th, 2010
= Boot Info Summary: =
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb .....
In both CentOS 5.5 and FreeBSD 7.4 when I use
Code:
snmpget -v 1 -c public windows_host system.sysDescr.0
I get the remote windows machine system description just fine. But not in ubuntu.
Searching snmp-net FAQ for the erroe message "Unknown Object Identifier", I got this to work around
Code:
snmpget -v 1 -c public 127.0.0.1 SNMPv2-MIB::system.sysDescr.0
But it not worked either.. Searching "MIB" using apt-file search, I installed "snmp-mibs-downloader", and now
Code:
snmpget -v 1 -c public 127.0.0.1 SNMPv2-MIB::system.sysDescr.0
works.. but
Code:
snmpget -v 1 -c public windows_host system.sysDescr.0
still breaks..
Why it works in CentOS and FreeBSD but not in Ubuntu?
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies View RelatedI can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies View RelatedI update Jessie "stable" 8.2 to 8.4 and now I get 5 minute interval kernel messages:
Apr 18 06:39:52 OraHost kernel: [131985.494726] sdc: unknown partition table
Apr 18 06:45:03 OraHost kernel: [132295.755942] sdc: unknown partition table
Apr 18 06:50:03 OraHost kernel: [132595.946564] sdc: unknown partition table
Apr 18 06:55:13 OraHost kernel: [132906.139327] sdc: unknown partition table
Apr 18 07:00:23 OraHost kernel: [133216.340555] sdc: unknown partition table
I believe this has something to do with an mdadm update which was included in the release. When I configured the array, I didn't partition the disk devices, so maybe that has something to do with it. I am thinking of rebuilding the array and partitioning prior to build, but a quick fix would be referable.
And also something appears to have happened to the raid device since the update.
Prior to update, the array was /dev/md0 - now it is /dev/md/0 which is a symbolic link back to /dev/md0.
mdadm --detail --scan now reports /dev/md/0 where previously it reported /dev/md0
I created a new RAID1 array on a fresh system and immediately after the create, these messages appear at 5 minute intervals.
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I installed the MOTU ffmpeg and libav ppa in Natty beta, the installation went through ok and media players all work. But I am having problems converting MP4 to MP3 (extracting audio) with the error message that libmp3lame unknown encoder. I checked that lame and libmp3lame0 are both installed. I wonder what might have been the missing piece.
View 9 Replies View RelatedWhenever I try to install Xubuntu onto my really old computer (not this one), it goes to a screen that shows nothing except the Xubuntu logo and the name. After a bit, my monitor falls asleep, and I am unable to wake it back up.If I press enter while at this screen, it brings up the error message in the title. The same thing happens with all the options I try to press.
View 1 Replies View Relatedi have ubuntu 10.10 but now i have problem to access it so i boot from my live CD this what i get in checkcdfordefects.png when i select Try Ubuntu without any change to your computer that i get logo of ubuntu and take long time to load and not see desktop when press esc this error that i get GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
remark
in bootf4.png
F4.mode
i don't have option safe Graphics Modes i need to acess Try Ubuntu but i don't know what problem?
I recently installed Kubuntu 10.04 Lucid Lynx Desktop 64-bit edition. The install worked and I was able to restart the machine no problems. Last week (5/27/10) I shut down my machine and since then I cannot boot. I assume it's because of new software maybe a new kernel; I did an "apt-get update; apt-get upgrade" on May 28th or 27th. Upon booting if I hit Esc right away I see:
(process:325): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
[About 5 minutes passes then this next line prints]
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/bin/sh: can't access tty; job control turned off
(initramfs) [this is some kind of shell...who can't see my harddrive]
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
