Fedora :: F12 Livecd Usb - Load Failed With Message - Sleep Forever
Nov 18, 2009I boot EPC 1000h from usb(Fedora-12-i686-Live). it shows msg at the point about "drm-model-rmfb". ...than it "sleep forever".
View 2 RepliesI boot EPC 1000h from usb(Fedora-12-i686-Live). it shows msg at the point about "drm-model-rmfb". ...than it "sleep forever".
View 2 RepliesI have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
I've downloaded Fedora 12 and decided to try and install it on my old laptop which is currently running Ubuntu 9.10 with no problems.
When I boot from the live cd, it starts to load with the 3 bars on the bottom, one on top of the other, one is white, one is dark blue, the other is in between those colours in the spectrum somewhere....
Anyway, the load bars complete and "Fedora 12" turns white, then the following output populates:
mount: unknown filesystem type 'DM_Snapshot_Cow' (<----- repeated a bunch of times) can't mount root filesystem Boot has failed, sleeping forever.
I have a Feadora 12 Live CD. It booted up fine on my 700 Mhz computer. I've since then put a new HDD in with which I intended to install Fedora on. But now i get this message
Quote:
No root device found. Boot has failed, sleeping forever
What does this mean? How do get the Live CD to boot?
I downloaded fedora 14 64 image then created a bootable flash drive and put the image on the flash drive. I rebooted and tried booting from the flash drive and that's the message I received. What do I do?
View 6 Replies View RelatedI need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message
I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---
System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---
[code]....
OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
I had Win XP on my T61. I installed Fedora 11 from Gnome LiveCD. Now I cant even see GRUB. The laptop boots directly into Win XP. I had the partitions like this:
/dev/sda1 - Win XP - NTFS - 75 GB
/dev/sda2 - Win Recovery - NTFS - 5 GB
/dev/sda3 - /boot - ext3 - 1 GB
/dev/sda4 - Logical extended partition
/dev/sda5 - / - ext4 - 10 GB
/dev/sda6 - swap - 3 GB
Installed GRUB on the MBR (/dev/sda, and not on any partition). Once I completed installing Fedora 11 from the LiveCD and rebooted, the laptop directly boots into Win XP. No sign of Fedora there. How do I get to install GRUB now?
When I start Firefox 4 on my Ubuntu 10.4 laptop, it takes about a minute for Firefox to actually load and display itself.
View 5 Replies View RelatedI have been using this thread for a couple of days and just getting exposed to the vast world of ubuntu after succesfully partitoning the hard drive through a live cd. (a copy of linux for dummies book)So naturally after getting adjusted to the new os I started seeking for downloadable media and applications.Started with flashplayer last night and installed after watching some videos.But when I tried the same thing with vlc through the terminal command; sudo apt-get vlc
The video streaming seased because they wouldn't load it stays searching forever! Now ..... doesn't work.I am afraid that by tampering with the command it also affected the flash player file.This is an ethernet connection , 100 mb/s, netgear router.
I need to connect to my company through a Cisco VPN. The Cisco client fails to build so I thought of using vpnc. I used Network manager (NetworkManager-vpnc is installed). However after setting everything up and then logging in, I get the 'VPN Connection Failed' message.
View 14 Replies View RelatedMy fedora 14 has OpenSSH_5.5p1, OpenSSL 1.0.0a-fips 1 Jun 2010 running. I am able to use putty to ssh to my fedora. I installed NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0) but when i used nxclient to connect to the server i always got 'session x' failed.
[code]...
As someone says,I install fedora 15 in VisualBox,and before installing I choose "Enable 3D acceleration",but when entering the desktop,I just see "Gnome 3 failed to load".Earlier of today,I try this in VMware Workstation,there is the same question. Why this happens?Is that means I will miss the Gnome 3 in VisualBox and VMware Workstation.....for God's seek...
View 8 Replies View RelatedI just having to do a fresh install and get the following message to close after setting up
partitions and on clicking write to disk:
Failed to mount "524M Volume"
Method "Mount" with signature "ssas" on interface
"org.freedesktop.Hal.Device.Volume" doesn't exist.
Only option under message is close button. I'm using Fedora 14 xfce 32bit live CD. The install seems to carry on normally until done but then when I check the partitions I've setup I seem to only have the origonal uneditted default partitions.
I am using Fedora 12 with HP 1020 Laser Jet. Plugged printer in and installed it. Now it doesn't want to print, it gives me a printer state message: /usr/lib/cups/filter/hpcups failed.
I have tried to reinstall hplip but it is the same.
Using the ubuntu live cd 9.10 I get weird error messages when shutting down the system, sometimes it is this one:
device removed: /freedesktop/Hal/devices/net_80_00_60_0f_e8_00
Other times it is bunch of errors saying something like:
i/o error/end request/dev/sector ****, with all different sector numbers..
These happens even when I have not installed anything, not using any flash drives etc...
I have built my own custom Fedora 15 spin, the problem is that every time it show me GNOME 3 Failed to Load message dialog with the following message: "Unfortunately GNOME 3 failed to start properly and started in the fallback mode ....." Is there anyway to disable this dialoag?
View 1 Replies View RelatedI ran Movie Player to play .mov file, but it generate the following error message:
pa_stream_writable_size() failed: Connection terminated
The .mov file is wide screen, I am not sure if that's why the error occurred. By the way, the .mov file is several hundred megabytes and store on DVD.
When booting from the LiveCd it starts to load but never loads! All it does is flash a _ icon and then becomes black!
View 9 Replies View RelatedI am installing fedora 15 in vmware 7.1.4.It tells me "Gnome3 failed to load and started in the fall back mode" when accessed in live-cd.Ever since fedora 15 beta or any other distros take gnome3 as default destop,I haven't experienced a beautiful normal gnome3
View 14 Replies View RelatedI'm having trouble connecting to my freenas server.
It's part of my windows network and when I try to connect to it,I get this message: Unable to mount location,Failed to retrieve share list from server.
Is there something I need to enable on the server or my OS(CIFS or something)?
It's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies View RelatedI am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies View RelatedWhenever I boot up Fedora 15 on Virtual Box, I get the message " gnome 3 could not load " and I installed all the packages needed to install Guest Additions, but even when I mounted the file, the ONLY file I could find online that was VMBoxGuestAdditions.iso or something like that, I mounted it, I tried installing, but nope, it gives me an error message that it can't. I have the latest version of VirtualBox and I've been on several forums and looked at many places but I can't fix it. I also have a problem where when I boot it up it says " the system is optimized to support 32 bit but it is currently 64 bit go here and click this to fix it " or something like that. and I can't figure out how to fix it in Virtual Box.
View 1 Replies View RelatedSince I upgrade our cluster from the FC14 to the FC15 I have a bad problem with the tftpd server. I have some thinstations booting over the network after the update the boot failed with the message "TFTP open timeout". I use an "ip alias" (cluster adress) for the tftp server (next-server in the dhcp), when I use the real ip I have no problem. I found some information about a "Service Guard environment" and an option to enable it:
"This option is required for some tftp clients. These clients reject the tftp reply received from a different IP address than the one requested when the server?s interface is configured with an alias IP address." I do not see an option like that in the tftpd server of the FC15.
System: F15-64bit, Intel Core i7 on Asus P6T mobo. I've upgraded to 2.6.40, and I'm regretting it!While 2.6.38 still works fine (apart from the usual random panics), 2.6.40 gives errors on boot, and reliably panics soon after login. Early in the boot I get the message "IOMMU: mapping reserved region failed" 8 times. Then boot appears to proceed as normal, at least once the nvidia blob is removed in favour of Nouveau (otherwise, forget it...).
After graphical login, the system freezes within a couple of minutes.After a text login, the system freezes within seconds with a panic, starting "BUG: Scheduling while atomic: swapper". A forum search for the IOMMU message leads to https://fedoraproject.org/wiki/Commo...IOMMU_handling but this talks about old 32-bit releases without BIOS virtualization support.
[Code]...
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedStarted testing F12 today, and ran into this. It takes about 30 s to start KPackagekit. Thats about 30 times slower than F11.
View 2 Replies View Related