OpenSUSE Hardware :: HP OfficeJet 6500 Success! Print/Scan/Fax 11.1?
Jun 10, 2010
Thought I'd give back to the community, at least something. HP OfficeJet 6500 success! Print/Scan/Fax Opensuse 11.1 Go here and download to your desktop. HP Linux Imaging and Printing Then simply do the konsole thing to run the installer, then easy to follow the prompts that appear. I'm hopeless and even I can do it, just look at all my previous noob questions. You then have printer, scanner that work perfect. (Gnome 11.1)The printers are quite cheap, $128AUD Dick Smith etc
View 5 Replies
ADVERTISEMENT
Sep 15, 2009
Anyone know where I can get a driver for that printer? I checked HP website and they don't make a driver for Fedora -- only MS-Windows and MAC. So how do I send something to that printer which is connected via USB cabel ?
View 3 Replies
View Related
Jul 24, 2010
I have a HP Officejet 6500 E709a printer, everything works fine except that I cannot print with color. I go to admin, open the config for printer, and print the test page but I get no color. Also, in the properties of the printer I cannot see the level of the ink. It says this info is not provided by the printer.
View 1 Replies
View Related
Sep 13, 2010
I've just set up the printer, with drivers, etc..., but I also need to set up the fax for future use. Just wondering how to do that: There's no option for fax in System --> Administration --> Printing
View 5 Replies
View Related
Mar 1, 2016
I just bought the HP Officejet Pro 8610. I got it all hooked up and tried to print a test page. All I got was page after page of nothing. I am running Debian Weezy on an AMD chip. I had an older HP all in one that worked but the print heads failed. How do I get the 8610 to print.
View 7 Replies
View Related
Jun 1, 2010
Fedora 12
installed system-config-printer
scanner works just perfectly usng xsane
printer shows in printer list, properties are accessible. yet it does not print.
print status shows: "Printer not connected?"
View 1 Replies
View Related
Feb 6, 2010
Trying to get Ubuntu to print to my Epson STYLUS SX515W, without much success. All OK with Windows but not with Linux.
Pipslite-wrapper appears to be missing. I have Googled but with no success.
View 1 Replies
View Related
Feb 24, 2011
I have just started using puppy linux 5.2 ( lucid) which has transformed my old PC . The only real problem encountered is that I cant get my HP 1050C to print or scan . Running the cups wizard gives me the option of the printer and I found a driver in the list. The table below shows the printer settings being used . Sending jobs or maintenance to the printer has no effect although the cups system says they are complete . Xsane does not see the scanner . The printer functions fine under windows . I am obviously missing something very basic
Description:HP Deskjet 1050 J410 series
Location:table
Driver:HP DesignJet 1050C PS3 v3010.106 (color)
Connection:usb://HP/Deskjet%201050%20J410%20series?serial=CN0C133YFV05 HW
Defaults:job-sheets=none, none media=unknown
View 3 Replies
View Related
Oct 30, 2010
I'm having trouble getting this printer to print. It'll scan fine, but it won't print. I keep getting the following error:
the printer's state message is: '/usr/lib/cups/filter/foomatic-rip failed'
I have searched and searched and tried numerous things, but I just can't get it to print. (I tried to post the debugging output here, but the forum kept wiping out my post).
View 3 Replies
View Related
Jun 13, 2011
I recently installed Ubuntu 10.04.2 Server on a small desktop to use as a print server. During installation I marked the sSH, Print, and Samba services.I can ssh into it just fine and that's how I'm configuring it. I have a hp Deskjet F2210 connected to it.My end goal is to be able to use the scanner from my *buntu desktop and from a desktop running XP. All of these being connected via ethernet router.
View 9 Replies
View Related
Jun 22, 2010
i use linux OS with ubuntu and i have installed my printer (epson stylus photo tx650) but when i print it prints black pages on and on and doesn't stop,though if i print using my windows xp laptop and using the same USB cable, it prints,hence this shows me that some settings on printer configuration are not well set and i fail to know which are these settings. its only printing i cant do but i can scan and even photocopy.
View 3 Replies
View Related
Dec 18, 2009
I have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?
View 7 Replies
View Related
Mar 15, 2011
I installed the 64-bit version of OpenSUSE 11.4 last week and tried to print from it today. I couldn't get anything to come out. I've tried both USB and network printing, and nothing ever works. Any attempt to print anything results in the HPLIP Status Service app telling me the job is "completed" immediately, with nothing printed, but the CUPS web interface reports "/usr/lib/cups/filter/hpcups failed".
It's connected to the network router and hp-setup discovers it when I use manual discovery and give it the IP address, but it still won't print even a test page, whether as root or as a user. I've also used the CUPS web interface to add my user to the list of users allowed to print, and added my user to the lp group. But I still get the same error and nothing ever prints.
View 7 Replies
View Related
Dec 5, 2009
after an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
[Code]...
View 9 Replies
View Related
Feb 6, 2011
I'm testing some (selfwritten) installer scripts and I'd like to test it on several linux systems. From my script, I create a database and a user, which should have no rights but to the objects created on that database. I create that user with "grant usage on <dbname>.* to 'user'@'%' identified by After that, the user exists, but is not allowed to login with mysql client (same procedure works fine on debian systems). At first thought, I supposed, that I did a mistake on database setup, but then I realized, that I could connect from a different workstation using that user.
To me it looks very strange, that that user sees information_schema and test, but not the database, I used at user creation. From my script I check success of db and user creation by using the created user for connection and exec a 'show databases', which should show the new created db. What am I missing with mysql on Suse systems? Is my expectation wrong, did I make a mistake on database setup or what do I have to change to validate success of my script?
View 9 Replies
View Related
Jan 9, 2010
The only problem I've encountered so far is with my soundcard - a Soundblaster Audigy (basic version). I'm dual booting with XP and followed the exact same procedure as with 11.1. Used GParted to shrink the Windows partition (and yes, I did defragment beforehand) First there was no sound with Opensuse, which didn't really bother me too much as I assumed I needed to d/l some drivers, so fine. I restarted and booted into Windows and find that I have no sound in any applications, yet they appear to be playing, mp3, waves etc and no problems indicated by windows or other programs, in effect the card is fine but not outputting. Reinstalled drivers - no success. Uninstalled the soundcard from Device Manager, didn't work either. In the end I had to physically remove the card,
reboot into windows, then shutdown, insert the card again, then install the drivers. This fixed the problem, but anytime I boot into Opensuse, the same problem occurs, very strange. I'm thinking there may have been a problem during the partitioning stage, maybe some stubborn little windows file didn't want to move during defrag' and got lost. That's the only idea I have at the moment. Tried to remove the Grub Bootloader with 'fixmbr' command, but it still loads.
View 4 Replies
View Related
Mar 10, 2010
My PC will not boot.I have tried to repair on the start up screen and by YaST with on success. sometimes it says device.map is wrong.
View 1 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Aug 18, 2011
With new installs of openSuse 11.4 I've hit a printer problem. I can run hp-setup (or hp-toolbox) for the wireless Officejet j6410 and it is recognised. The right driver is selected. Then when I choose add printer it all falls over with the error message: error: Printer queue setup failed. Could not connect to CUPS Server Is user added to "lp" group(s) error: Fax queue setup failed. Please restart CUPS and try again.
The user is added to the lp group. I have this problem with my 64 bit desktop and 32 bit laptop installs of 11.4, it all worked perfectly in 11.2. I've used the Cups web interface to set up the printer now and can print from both machines, but I would prefer to use the hp-toolbox, which has several convenient features. Where do I go from here?
View 5 Replies
View Related
Jan 18, 2010
>have tried to link up to HPLIP, but there are NO entries for relationships with Slackware, only the other major Distros like Debian, RedHat, Ubuntu, etc. >i have run hp-check -ldebug, locally with Konsole to try and see why my HP OfficeJet 6500 will not join up with my linux box on the network, i was told that the LSB dependancy was missing,>upon looking for it at www.slacky.eu i cannot find it there
am i looking at this wrong, i think that by finding and downloading and running installpkg on the .tar.gz that will show for 'LSB' dependancy (install_initd)that that will be the missing piece to getting my printer "on-line".
View 1 Replies
View Related
Mar 29, 2011
I've bought a Film scanner from Aldi, Called a "traveller TV-6500 sf" It comes only with windoze drivers. I have Ubuntu 11.04. All up to date! I have Xsane installed, which works fine with my flatbed scanner. It does not even "see" the film scanner. It's plugged into a usb port(tried several) and lights up, so assume that the hardware is ok.
View 9 Replies
View Related
Sep 1, 2011
I tried to do all the things I found online in aim installing the driver of my Broadcom 802.11 card, so I will have wireless in my UBUNTU 11.04. But I always get those messages (which appear in the end).
From the shell:
ME@ubuntu:~$ cd Desktop/
ME@ubuntu:~/Desktop$ ls
broadcom-sta-common_5.60.48.36-3_all.deb gnome-terminal.desktop
broadcom-sta-source_5.60.48.36-3_all.deb
ME@ubuntu:~/Desktop$ sudo dpkg -i *.deb >> tt.txt
[sudo] password for ME:
dpkg: dependency problems prevent configuration of broadcom-sta-source:
broadcom-sta-source depends on debhelper (>= 7); however:
Package debhelper is not installed.
broadcom-sta-source depends on quilt; however:
Package quilt is not installed.
dpkg: error processing broadcom-sta-source (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
broadcom-sta-source
ME@ubuntu:~/Desktop$
View 5 Replies
View Related
Jan 13, 2011
I'm trying to install hp DeskJet 6500 printer on a network.
My Centos version is
Linux xxxxx 2.6.18-194.26.1.el5xen #1 SMP Tue Nov 9 13:35:30 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
Ofcourse My printer model is not showing up on the list of printer list when using ipp based configuration.
so while searching around, I came across article to install hplip at
[URL]
and I tried to install the following hplip version with centos.
[URL]
Running the configure with following arguments
./configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib64 --prefix=/usr --enable-qt4 --enable-doc-build --enable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-policykit --disable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build
I get following error
configure: error: cannot find net-snmp support (or --disable-network-build)
But net-snmp is installed on my system, so, I tried with disable-network-build and tried to get around the problem, the next error I get is
checking for usb_init in -lusb... no
configure: error: cannot find libusb support
View 14 Replies
View Related
Aug 28, 2010
I'm trying to install centos 5.4 on a older compaq proliant 6500 server with raid it was previously used for windows server 2003 for several years but management wants it turned into a time clock server that will run linux, obviously there is no smart start software for centos on this model, is there some kind of driver needed, be aware that i only did installations on single drive servers and new servers that take centos right away with new raid adapters compaq raid controller 3200.
View 10 Replies
View Related
Nov 20, 2009
I'm looking for an easy solution (1 click install) to scan multiple pages to one pdf file on openSUSE 11.2 with gnome.Most tools only support 1 page tobe scanned to pdf.gscan2pdf looks like a solution but I can't get it running on 11.2.(missing dependencies e.g. perl-forks)
View 9 Replies
View Related
Sep 2, 2010
klamav KDE doesn't work. It won't download updates. So, I want to make a one-click scan. I'v been using shell installers from nvidia. I know the sequence I use in the terminal to get it running. There should be way to do this from the desktop.
View 9 Replies
View Related
May 1, 2011
I just installed OpenSUSE 11.4 x64 as a fresh full-install last week. Seems to be running great, up until the last couple days when I installed AVG. Every time I do a avgscan, it runs for 20 to 60 min, and then causes the PC to reboot. The only thing I can find is the following event in the /var/log/messages:
Code:
May 1 11:45:01 linuxbox sntp[7653]: Started sntp
May 1 11:45:59 linuxbox kernel: [38429.349995] iTCO_wdt: Unexpected close, not stopping watchdog!
May 1 11:46:00 linuxbox kernel: [38430.111688] PM: Marking nosave pages: 000000000009d000 - 0000000000100000
[Code].....
I get this result every time I try to do a virus scan. I also have seen this result once when doing a large scp transfer from another Suse box. The AVG log just terminates and gives no warnings as to what's going wrong.
Are there any other logs I can check out to try to troubleshoot this further???
View 9 Replies
View Related
Jul 10, 2011
I tried to decipher the info on the opensuse site about networked scanners but it's not clear to me and I don't see anything in the forum here that addresses the question, so here goes. My PC is an opensuse 11.3 box. My Epson CX9400 is attached to a Windows 7 PC at the other end of the house.
The PC's can talk and can access shared files nicely. It will print perfectly from the Windows box or the Linux box. It will scan perfectly from the Windows box. BUT I cannot scan documents from the Linux box. Have installed XSane and Image! Scan for Linux and neither one seem to find the scanner. I tried adding it manually in YaST and it doesn't seem to find it either.
View 11 Replies
View Related
Nov 20, 2010
i have HP Compaq 6710b with Wlan Broadcom 4321AG i can't connect to network and i can't scan
View 6 Replies
View Related
Jan 31, 2010
my all-in-one Epson scanner does not work. I tried to install the iscan drivers (free and/or proprietary) via repository and/or via Avasys website, but nothing happens: the scanner is not recognized. I use Gnome and openSUSE 11.2
View 3 Replies
View Related
