I've just set up the printer, with drivers, etc..., but I also need to set up the fax for future use. Just wondering how to do that: There's no option for fax in System --> Administration --> Printing
View 5 RepliesAnyone know where I can get a driver for that printer? I checked HP website and they don't make a driver for Fedora -- only MS-Windows and MAC. So how do I send something to that printer which is connected via USB cabel ?
View 3 Replies View RelatedI have a HP Officejet 6500 E709a printer, everything works fine except that I cannot print with color. I go to admin, open the config for printer, and print the test page but I get no color. Also, in the properties of the printer I cannot see the level of the ink. It says this info is not provided by the printer.
View 1 Replies View RelatedThought I'd give back to the community, at least something. HP OfficeJet 6500 success! Print/Scan/Fax Opensuse 11.1 Go here and download to your desktop. HP Linux Imaging and Printing Then simply do the konsole thing to run the installer, then easy to follow the prompts that appear. I'm hopeless and even I can do it, just look at all my previous noob questions. You then have printer, scanner that work perfect. (Gnome 11.1)The printers are quite cheap, $128AUD Dick Smith etc
View 5 Replies View RelatedWith new installs of openSuse 11.4 I've hit a printer problem. I can run hp-setup (or hp-toolbox) for the wireless Officejet j6410 and it is recognised. The right driver is selected. Then when I choose add printer it all falls over with the error message: error: Printer queue setup failed. Could not connect to CUPS Server Is user added to "lp" group(s) error: Fax queue setup failed. Please restart CUPS and try again.
The user is added to the lp group. I have this problem with my 64 bit desktop and 32 bit laptop installs of 11.4, it all worked perfectly in 11.2. I've used the Cups web interface to set up the printer now and can print from both machines, but I would prefer to use the hp-toolbox, which has several convenient features. Where do I go from here?
Fedora 12
installed system-config-printer
scanner works just perfectly usng xsane
printer shows in printer list, properties are accessible. yet it does not print.
print status shows: "Printer not connected?"
>have tried to link up to HPLIP, but there are NO entries for relationships with Slackware, only the other major Distros like Debian, RedHat, Ubuntu, etc. >i have run hp-check -ldebug, locally with Konsole to try and see why my HP OfficeJet 6500 will not join up with my linux box on the network, i was told that the LSB dependancy was missing,>upon looking for it at www.slacky.eu i cannot find it there
am i looking at this wrong, i think that by finding and downloading and running installpkg on the .tar.gz that will show for 'LSB' dependancy (install_initd)that that will be the missing piece to getting my printer "on-line".
I've bought a Film scanner from Aldi, Called a "traveller TV-6500 sf" It comes only with windoze drivers. I have Ubuntu 11.04. All up to date! I have Xsane installed, which works fine with my flatbed scanner. It does not even "see" the film scanner. It's plugged into a usb port(tried several) and lights up, so assume that the hardware is ok.
View 9 Replies View RelatedI tried to do all the things I found online in aim installing the driver of my Broadcom 802.11 card, so I will have wireless in my UBUNTU 11.04. But I always get those messages (which appear in the end).
From the shell:
ME@ubuntu:~$ cd Desktop/
ME@ubuntu:~/Desktop$ ls
broadcom-sta-common_5.60.48.36-3_all.deb gnome-terminal.desktop
broadcom-sta-source_5.60.48.36-3_all.deb
ME@ubuntu:~/Desktop$ sudo dpkg -i *.deb >> tt.txt
[sudo] password for ME:
dpkg: dependency problems prevent configuration of broadcom-sta-source:
broadcom-sta-source depends on debhelper (>= 7); however:
Package debhelper is not installed.
broadcom-sta-source depends on quilt; however:
Package quilt is not installed.
dpkg: error processing broadcom-sta-source (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
broadcom-sta-source
ME@ubuntu:~/Desktop$
I'm trying to install hp DeskJet 6500 printer on a network.
My Centos version is
Linux xxxxx 2.6.18-194.26.1.el5xen #1 SMP Tue Nov 9 13:35:30 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
Ofcourse My printer model is not showing up on the list of printer list when using ipp based configuration.
so while searching around, I came across article to install hplip at
[URL]
and I tried to install the following hplip version with centos.
[URL]
Running the configure with following arguments
./configure --with-hpppddir=/usr/share/ppd/HP --libdir=/usr/lib64 --prefix=/usr --enable-qt4 --enable-doc-build --enable-cups-ppd-install --disable-foomatic-drv-install --disable-foomatic-ppd-install --disable-hpijs-install --disable-policykit --disable-cups-drv-install --enable-hpcups-install --enable-network-build --enable-dbus-build --enable-scan-build --enable-fax-build
I get following error
configure: error: cannot find net-snmp support (or --disable-network-build)
But net-snmp is installed on my system, so, I tried with disable-network-build and tried to get around the problem, the next error I get is
checking for usb_init in -lusb... no
configure: error: cannot find libusb support
I'm trying to install centos 5.4 on a older compaq proliant 6500 server with raid it was previously used for windows server 2003 for several years but management wants it turned into a time clock server that will run linux, obviously there is no smart start software for centos on this model, is there some kind of driver needed, be aware that i only did installations on single drive servers and new servers that take centos right away with new raid adapters compaq raid controller 3200.
View 10 Replies View Relatedwe were able to get my officejet g55 and others' g85s working with karmic. the old tricks are not working for me.
i have lucid 64-bit.
I have three computers with wireless and wired connections to a HP Officejet 6500A Plus all-in-one that I purchased a few months ago. Two of the three are running Ubuntu (versions 8.04 and 9.10). By Christmas, I'll be getting a new computer and upgrading to an Ubuntu v. 10.xx or 11.xx. In the first few weeks after I got the 6500, I had no trouble printing (although in 8 years using Linux, I've never been able to scan ...). For the last couple of weeks, however, I've been unable to print. I keep getting messages saying that the printer is not connected. I have re-installed the printer drivers and run hp-setup several times but to no avail. Its latest trick is to start spitting out paper with a line or more of ASCII symbols at a very rapid rate. The third computer is a Windoze 7 box that my son connects to wirelessly but he can no longer print as well.
View 1 Replies View RelatedI just installed an HP Officejet 6200 on a Slackware 12.1 machine. It uses a USB interface. If I am on the machine, I can print to it with no problem. When I am on my Debian or Centos machines, I cannot. I have midified the cupsd.conf file to allow everyone to connect to it but so far have not had any success. Port 631 is open on all machines. I have explicitly added a hosts allow 192.168.0.0/24 line in several portions of the conf file with no luck. If I use the cups interface on any of the machines using localhost:631 as the address, I can not only see the printer I can print to it, but I noticed, I am actually attached to the Slackware machine where the printer is located. Can someone suggest a debugging method to help?
View 7 Replies View RelatedGot a problem here with my xsane scanner. my printer is HP Officejet 6500 wireless. when i run xsane when i have a document to scan it says error: failed to open device 'hpaio:net/officejet_6500_E7009n?ip192.168.1.20':error during device I/O.howcan i use again my scanner?
View 4 Replies View RelatedI just bought the HP Officejet Pro 8610. I got it all hooked up and tried to print a test page. All I got was page after page of nothing. I am running Debian Weezy on an AMD chip. I had an older HP all in one that worked but the print heads failed. How do I get the 8610 to print.
View 7 Replies View RelatedI have a HP Office-Jet 6110 All-In-One for about 5 years now and I havve been using it on Suse and openSuse without a problem all these years. This morning I wanted to scan something and suddenly realised that the scanner is not working. I can print but not scan. i tried to set up the scanner using YaST like I have done for the past 5 years but it#s not working. Hpaio shows that no scanner is available for this driver. I can#t install the scanner. What has changed in 11.2 that devices that worked before are not working anymore?
View 7 Replies View RelatedI installed the 64-bit version of OpenSUSE 11.4 last week and tried to print from it today. I couldn't get anything to come out. I've tried both USB and network printing, and nothing ever works. Any attempt to print anything results in the HPLIP Status Service app telling me the job is "completed" immediately, with nothing printed, but the CUPS web interface reports "/usr/lib/cups/filter/hpcups failed".
It's connected to the network router and hp-setup discovers it when I use manual discovery and give it the IP address, but it still won't print even a test page, whether as root or as a user. I've also used the CUPS web interface to add my user to the list of users allowed to print, and added my user to the lp group. But I still get the same error and nothing ever prints.
I have had good success with the HP OfficeJet 6310 printing and Karmic. However, recently when printing, the print job stops after a certain amount of pages ( when printing a multiple page document ). The first page almost always prints immediately. This issue occurs with PDFs, OO Writer documents and OO Spreadsheet documents. The printer status window on the printer shows "printing" and the print manager in Gnome shows printing. Sometimes the printing completes after several minutes. Other times I end up killing the job and powering down the printer.
View 9 Replies View RelatedI would like to configure the button of my printer officejet 4500. However I do not manage to use scanbuttond daemon. How to test key pressing? It seems that nothing is seen by scanbuttond ... when I manually press a key on the printer.
Code:
$ dpkg -l | grep scan
ii gawk 1:3.1.7.dfsg-5 GNU awk, a pattern scanning and processing language
ii libsane 1.0.21-9 API library for scanners
[Code].....
after an update to 11.2 (from 11.1), 64 bit, I don't get the printer to work. I reinstalled the driver and checked in cups: it says that the printer is available and waiting for a job. When I send something to the printer, nothing happens. The priont job will be stopped immediately. The printer is properly connected: xsane finds the scanner, that is part of the printer, without a problem. The printer is also ok: I can copy documents, it just works fine.
[Code]...
I have a HP Officejct Pro 8000 Printer hooked to UBUNTU 9.10 on a system 76 box. The printer is not loading paper properly. I see references to this issue on various websites and I saw at least one reference to new drivers but alas they were all for windows. I checked the repository and I have the latest and greatest HPLIP. Does this mean I have all of the latest drivers?
View 2 Replies View RelatedSince upgrading from Ubuntu 10.04 to 10.10 my HP Officejet 6313 has lost contact with the system.
View 2 Replies View RelatedI am trying to make my fedora 15 my gateway instead of my old D-Link, but I can't seem to get it working.
View 5 Replies View RelatedI've been trying to setup RAID 10 with Fedora 11 on my desktop using this tutorial:[URL].. Everything has been going well, except when following the instructions and getting ready to format, it says I need to define / and boot partitions. This was never included in the instructions.
- LVM Volume Gropus
-- vg_jordan
--- fedoraRAID (type: ext4)
- RAID Devices
-- /dev/md0 (mountpoint/RAID/volume: vg_jordan ; type: LVM)
[Code]...
To install mysql follow this process. Go to your Terminal and Enter the command given below:
Code:
After installation you need to start mysql server by
Code:
After this you need to enter this command
Code:
1.First you system will ask you old mysql root password if you have installed mysql just now and not set password yet then you can enter anything or just press enter.
2. After that system will ask you twice for new password you can set a new password or you can keep it blank for no root password. I will suggest you to enter a password.
3.remove anonymous user? make it yes when you install mysql an automatic mysql user has created so remove it.
4. Disallow root login remotely. Hope you want to disallow mysql root login from remote for security of your mysql sever. If you want to use you can select no.
5. Remove test database. As anonymous user system generate and automatic database for testing.select yes to delete it.
6.Reload privileges: do yes to flush privileges.
Now you can login in your mysql server as root by this command
Code:
One more thing make sure that when you are entering this command you login your terminal as general user not as root.
Now you can create a new user by following commands.
To create databases
Code:
To see database list
Code:
Code:
Code:
Code:
Code:
Code:
If you want to work with mysql in gui mode Then you can install phpMyAdmin to install phpmy admin go to terminal and eter
Code:
And after completing installation you can login in to phpmyadmin. To login go to your browser enter [url] or Click here or you can download mysql gui client Mysql Work Bench from mysql website or Click here after installation it will be appear in programming menu. It's also cool client with mysql server activity watcher.
I need some help getting my dual monitors working in Fedora 12. I've tried some things from other posts and a few things from various websites and wikis (Gentoo), but nothing I've done has worked. To be honest, I can barely remember what I've tried and what I haven't anymore, because I feel like I've gone in circles.The card has one DVI out and I'm using a DVI-splitter to connect the two monitors. This configuration works on my Windows 7 boot. Also, the second monitor is detected, but shows no display.
View 1 Replies View RelatedI ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View Relatedi am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....