OpenSUSE Network :: Cannot Scan Windows server
Jul 10, 2011
I tried to decipher the info on the opensuse site about networked scanners but it's not clear to me and I don't see anything in the forum here that addresses the question, so here goes. My PC is an opensuse 11.3 box. My Epson CX9400 is attached to a Windows 7 PC at the other end of the house.
The PC's can talk and can access shared files nicely. It will print perfectly from the Windows box or the Linux box. It will scan perfectly from the Windows box. BUT I cannot scan documents from the Linux box. Have installed XSane and Image! Scan for Linux and neither one seem to find the scanner. I tried adding it manually in YaST and it doesn't seem to find it either.
View 11 Replies
ADVERTISEMENT
Aug 30, 2010
How do I scan a windows computer from my Ubuntu laptop via the network? I have Ubuntu 10.04 on my laptop. First Windows computer to scan has Windows XP Home Edition Second Windows computer to scan has Windows Vista Home Basic I have Avast 4 workstation and KlamAV insalled on it. What is the steps to make my computer scan those windows computers. And how do I set up my firewall to work with firefox and empathy?
View 5 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Nov 26, 2010
I need AV for Linux to scan windows clients.
I search over internet but not found something like that
Did anyone know something like this?
View 3 Replies
View Related
Nov 20, 2010
i have HP Compaq 6710b with Wlan Broadcom 4321AG i can't connect to network and i can't scan
View 6 Replies
View Related
Dec 23, 2009
Cannot Connect to a wireless network using a USB Belkin 802.11g Model F5D7050: Setting up a new pc is running opensuse 11.2 (i586) KDE 4.3.1
Question1) The HCL shows a version, how do I find what version i have?
Question2) Why is rt73.bin not being loaded? I ask this because the file is located in Root/lib/firmware
Question3) Why is Configure Desktop > Network Manager > Wifi is blanked out as if doesnt exist?
Question 4) when using YAST > Network Settings > Initially under wireless network card configuration I can scan the area and find networks successfully (I got 2, one as a wifii hotspot from my pda cell phone, the other is the standard wireless network for laptops and such).... but if i use kinternet >wlan0 > wireless connection, nothing will be found! I did a search on the /var/bootlog msg for "switch" and "radio", for radio I found the following:
<6>[ 9.108858] Registered led device: rt73usb-phy1::radio
<6>[ 9.108884] Registered led device: rt73usb-phy1::assoc
<6>[ 9.108909] Registered led device: rt73usb-phy1::quality
<6>[ 9.109386] usbcore: registered new interface driver rt73usb
[Code].....
View 1 Replies
View Related
Jul 29, 2010
when I attempt to scan anything with clamav from a terminal I get the following error:
ERROR: Can't create temporary directory /var/lib/clamav/clamav-da584cb3f4ee38529f0460ad6f7dc632
Hint: The database directory must be writable for UID 999 or GID 100
Which I take to mean that there are no virus definitions installed. I use the "freshclam" command. Which results in the following error:
ERROR: Can't create temporary directory /var/lib/clamav/clamav-da584cb3f4ee38529f0460ad6f7dc632
Hint: The database directory must be writable for UID 999 or GID 100
View 5 Replies
View Related
Jan 19, 2010
i work in an office with individual p/c's (all with windows xp) connected to a windows server. i have installed opensuse 11.2 on my work's p/c (as a dual boot) but have no idea what to do so that i can access files on the windows server. can some kind person point me in the right direction.
View 3 Replies
View Related
Apr 18, 2010
I was programming much in windows and I slowly get used to linux, I'm using SUSE 11.2 as a server in my home network. I about 10 windows-pc's in my network, which is structured as following: Very simple router (no dhcp) -> Switch -> Win1, Win2, .., Suse, I already managed to set up the DHCP server, and it works like a charm, I'm not able to get in the internet with the Windows PC's. This is especially strange if you consider the settings:
[code]...
I tried pinging the gateway from both suse11.2 and win but it failed. Pinging win7 to suse and other way around is possible. internet works on suse11.2, but it doesn't works on win.
View 7 Replies
View Related
Jul 5, 2010
I have too many problems to join my OpenSuSE 11.2 with Samba 3.5.4 in a Windows 2008 Active directory Forest (MYDOMAIN.LOCAL). I have updated Samba to 3.5.4 after read that default 11.2 version have too many bugs. Now, when I try to join the Domain MYDOMAIN.LOCAL via yast i have only an undebuggable error "unknown error". For yast, my Suse is joined but i'm unable to authenticate, i can't see "MYDOMAIN.LOCAL" at KDM login and if i try to lookup forest i have this error:
Code:
wbinfo -u
Error looking up domain users
but i'm able to retrive ticket via kinit
Code:
# kinit Administrator
Password for Administrator@MYDOMAIN.LOCAL:
[Code]...
have you a samba version tested against Active Directory 2008? can you link me the repository or help me to solve this?
View 2 Replies
View Related
Jan 12, 2011
With SUSE-9 I used pptpconfig to connect to a Windows VPN Server.With openSUSE-11.3 I created a VPN Network Connection,however I have no idea how to start the network connection.
View 1 Replies
View Related
Feb 22, 2010
I tried to use a windows server side program in wine but seems the ip has changed.
View 9 Replies
View Related
May 18, 2011
guide me to connect the SLED 11 SP1 to KEVIN.org (This is the name of my domain I created) Wich i created on windows server 2008.
View 9 Replies
View Related
Jan 20, 2010
I have x11 forwarding enabled in /etc/ssh/sshd_config on a suse 11.2 32 bit box running kde I can open x apps on a windows machine using xming and putty just fine, but when I boot the same machine into suse 11.2 64 bit using kde and try using konsole I get: cannot connect to x server
The command I'm using to log in is: ssh -X -l username host I doubt the problem is with the server I'm logging into or it wouldn't work in windows, not really sure what to look for as I've never had a problem using x11 forwarding from a linux client before only windows ones
View 7 Replies
View Related
Sep 7, 2010
I'm trying to set my openSUSE desktop up to use the printers on my office network via Samba. I managed to get it working in 11.2 but 11.3 is giving me some trouble.I am able to access the printers and use them but I have to enter my network credentials each time I print. In 11.2 I was able to "save" my username/password and was not required to do this. Are there any Samba packages I need to add in addition to the basic ones? There seems to be a lack of documentation on this particular subject, most is concerning Windows clients printing on Linux print servers.
View 2 Replies
View Related
Oct 27, 2010
1 ) make and model of wireless device Athreos 5k
2 ) driver version in use dont know
3 ) any error message. -
abhishek:/ # sudo /usr/sbin/iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
4 ) what you have tried to rectify the problem.
Tried to install all the patches.
5 ) any trouble-shooting guide you have tried to follow. - The previous two stickies
6 ) openSUSE version 11.3
7 ) type /sbin/lspci -v" in a terminal; copy and paste the section that identifies your wireless card and it's chipset. 07:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ 23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
[code]....
View 9 Replies
View Related
Jun 14, 2010
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies
View Related
Jun 3, 2011
Is there an AV i can use to scan my windows partition to find any bugs/backdoors or viruses? I know there is a backdoor somewhere, and comodo isnt picking it up so i am refusing to boot from my windows 7 right now. My password information keeps getting changed and websites and emails are alerting me that someone has access to them and is trying to promote spam.
View 9 Replies
View Related
Dec 10, 2010
I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.
From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.
I've read that there is a bug with the SAMBA libsmbclient [URL].
I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.
View 1 Replies
View Related
Mar 9, 2010
I just intalled OpenSuse 11.2 on VmWare Server 2.0.2, the network is configured as Bridged and is sucefully configured a fixed IP in my network. Ok... The problem is... I can ping / trace all addresses from OpenSuse console. But I Can't wget all of them... It's a random thing. the same address that trace's ok, don't work for HTTP.
View 2 Replies
View Related
Apr 7, 2010
How can i do this? I have both clamav and Bitdefender scanner for unices and I need to scan a shared folder, but it seems none of the AV programs understand samba dirs (ie. smb://compname/sharedfolder/)
View 4 Replies
View Related
Sep 15, 2009
I am brand new to Linux.I was wondering if there is an anti-virus software that runs under Linux (Ubuntu Live), that can scan Windows files and get rid of the viruses?I ask this as I had a trojan that was detected, but could not be deleted under Windows; I had to us Ubuntu live to delete it, which seemed to have worked.
View 2 Replies
View Related
Jun 17, 2011
I want to setup a Linux File Server for a small windows network (around 50 users). I do know that I am gona need Smb service/pkg for that. I haven't used Samba for a while now and as per the best of my knowledge, entire communication (including usernames and passwords) between a samba server & windows client machines will be plain text. Is there any way to secure all this communication??
Secondly, if i remember correctly, MS windows wont let me mount more than one samba shares as network disk when all my shares can be accessed by different smb users with different passwords?? is there a solution to this problem? OR may be if there is any other package available for this purpose so that i wont have to use samba?
View 4 Replies
View Related
Jul 6, 2010
scan my network and check for files within a LAN, in a mixed Linux and Windows environment.Something like LAN spy for Windows. Is there a package or program like that for Linux?
View 2 Replies
View Related
May 13, 2010
I just started messing with the networking tools in Linux, and I've discovered that when I run an intense scan in zenmap on 192.168.1.1-254, the network crashes. By network crash I mean - All clients on the network lose connectivity.
View 12 Replies
View Related
May 12, 2010
I'm dual booting 10.04 with windows 7 and it occurs to me that I could scan the windows partition for viruses FROM linux. Is anybody doing this sort of thing? Does that make any sense?
View 3 Replies
View Related
Jan 9, 2011
I have installed a new network multifunctional device Samsung CLX-3185FN using the drivers provided by the manufacturer (Samsung Unified Driver). The printing over the network works fine, I can administer the device using browser. The only problem I have is using scanner over the network. It works fine if I disable firewall, but is blocked with firewall enabled. I can not figure out which ports or port-range I must enable for this scanner. Do you have any information on this one or how can I found out the necessary ports to open?
View 3 Replies
View Related
Jan 31, 2010
I know that there is little need for me to install an anti-virus etc - but - I was thinking, it is a good idea to scan folders and files that I send to colleagues that run windows.Whats the best way and programme to do this? I guess I simply install an AV programme and thats it!
View 5 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
