When I go to System->Administration->Printing no window pops up. Down on the bottom panel it says "Starting Printing" and then goes away. I'm trying to install my HP Deskjet printer,
I'm trying to install centos 5.4 on a older compaq proliant 6500 server with raid it was previously used for windows server 2003 for several years but management wants it turned into a time clock server that will run linux, obviously there is no smart start software for centos on this model, is there some kind of driver needed, be aware that i only did installations on single drive servers and new servers that take centos right away with new raid adapters compaq raid controller 3200.
Anyone know where I can get a driver for that printer? I checked HP website and they don't make a driver for Fedora -- only MS-Windows and MAC. So how do I send something to that printer which is connected via USB cabel ?
I have a HP Officejet 6500 E709a printer, everything works fine except that I cannot print with color. I go to admin, open the config for printer, and print the test page but I get no color. Also, in the properties of the printer I cannot see the level of the ink. It says this info is not provided by the printer.
I'm trying to install Brother DL-5250DN laser network printer. I have read the manual at [URL] and also I have searched the forum but I didn't find a solution yet. The problem is that I don't know what is the printer type that I have to select. None of the description really match for this printer. It is a printer which is directly connected to the network and *not* to a Linux or Windows machine. The only type that matches is AppSocket/HP JetDirect. I tried to cinfigure it with CUPS but it doesn't work. After I type the password nothing happens.
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
I installed the Printer, but Xsane does not recognize the scanner, how can i acivate the scanner. my system is Debian Lenny 507 Kde i386. I have looked through the posts in the forum, but found nothing that can help me. can somebody point me in the right
After clicking on the print option on ms -word, printer does not respond! In the print dialogue box it shows that ink cartridge empty, but even after refilling it, it shows the same status!
The printing has been running without problem ever since the installation of this box at least >1 year. Today I found it stop working with following warning: Code: Filter /usr/lib/cups/filter/hpcups for printer Deskjet-5700 not available
I'm running a standard 13.1 32 bit install with an HP deskjet 990C, run off of USB. Until today everything has printed properly. Now nothing prints. Nothing has been installed unless it came through slackpkg, and yes it is still on the correct setting for arch and revision. CUPS shows printer as installed, accepting jobs an idle. No error messages are appearing but nothing is reaching the printer. The info I can glean is from the error logs in CUPS:
I have recently acquired me a HP all-in-one printer model HP Deskjet F2483. The printer works fine but am having issues getting the scanner to work. Following instructions I found to Google, this is what my shell looks like:
Code: sh-4.0$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter.
My HP Deskjet D-2660 will not print. I can print to file but not the printer. I am running Ubuntu 10.04 and have no other problems. I have installed hpip and hpijs form HP and cups was made available via and upgrade. I have a lot of data from var/log/cups/error_log but don't know what it is supposed to say.
I can print to file and everything else I check seems to say that all is right. Is there any glaring faults that I should look for?? As I stated on the other post I get a message that the print job has been sent to the printer and then another message stating that the print job has completed. In system/administration/printing, the printer shows up properly and has a green check mark on it. Connected to localhost shows at the bottom of the little window. Under /printer it shows shared and enabled Then under printer/properties, it shows as the HP Deskjet D2600 series the location is given as john-desktop It defines the Device URI: hp:/usb/Deskjet_D2600_series?serial=CN9ANDF0ZT05C9 shows the Make and Model HP Deskjet d2600 Series hpijs,.. printer state: idle
Across the bottom it theoretically allows you to print a test page or clean the print heads. (won't print) On the printing-local host small page that opens under system/administration/printing there is no group under that heading only new group or new group from selection. I never named a group since I am the only user.
I have shut the printer down and disconnected the USB and rebooted. Then connect the power and plug in the USB cable I get all the same answers nothing appears to change. Here is some of the var/log/cups/error_log file. It does this over and over every minute same thing. The print que is empty from both administration and applications.
I am attempting to connect a CentOS VMWare VM to a networked Brother HL5170DN printer. The printer is located at 192.168.0.101. It is available and I can connect to it with various Ubuntu and Windoze VMs.
I have searched for instructions on how to do this and it SEEMS rather simple. However, it does not work. Here is what I have done:
System; Administration; Printing to launch the printer configuration wizard supply root password New Printer Provide printer name, description etc. Select Connection - LPD/LPR Host or Printer Hostname - 192.168.0.101 supply a printer name again select Brother HL5170DN BR-Scripts3 from the footmatic database complete creating the printer
The printer appears as a local printer, however, I cannot print a test page. Nothing happens when I click the button to print a test page. I can ping the printer by IP address. So I deleted the printer and tried again.
At the screen which asks for Hostname and Printername I entered the printer's IP address in Hostname as I had done before. I then clicked the Probe button. At this point Printer configuration freezes and I have to do a force quit.
I just tried the same thing on a physical CentOS 5.6 box - just in case the problem was a VMWare thing. Same symptoms. Probe freezes the Printer configuration program. I then recalled that the printer uses port 9100. I opened 9100 on the firewall (I think) but no improvement. I temporarily disabled the firewall and went throug the proces. I now have the printer defined at "socket://192.168.0.101:9100" and recognized as "Brother HL-5170DN BR-Script3"
I still cannot print a test page. I tried to print from gedit and it shows the printer with 1 job in the queue. The gedit print bumped that to 2 jobs in the "printing" state. Looks like I am communicating with the printer. Just not printing.
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
I have a recently installed dual boot system with Centos 5.2 and Fedora 10. I connect across a LAN to a network printer HP Laserjet 1320n I have been through the printer installation / setup on both systems Fedora works fine, Centos doesn't want to know. Sending anything to print just adds it to a queue that is never printed.
I have looked at the printer management through Firefox browser localhost.localdomain:631 If I send a test page from here (CUPS) it reports the document as printed, but the printer just sits there blinking an orange light indicating an error.
I have problem with my printer HP Deskjet D1460. My printer is configured and works. When I send a file on the print, the printer clings a sheet of paper and starts to print, but a paper as was clean so clean and remains, after printing.
I installed CentOS 5.5 on my Compaq desktop PC connected to a LAN/Router, at the installation somehow the LAN connection was automatically determined and I was able to use the browser without doing anything.However when I added a print server to the LAN/Router I lost network connection from my Compaq PC running CentOS 5.5. Is there a way to rerun network manager installation to determine the new LAN settings (with a print server attached)
is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
I have a virtual Linux box with a static IP in the cloud.
I have remote sites that have networked PCs that normally act as terminals but also have more than one printer on the Windows Network.
I would like software on the Window's machine to access the known IP address of the server and advertise the printers on the network so they can be printed to with lpr or cups. I don't have a problem manually setting up the printers on Centos if that is necessary. (But I need to know how to do that as well).
I need to know if I can setup a VPN on Windows without it stopping regular internet traffic and how to do it.
I need to know all the steps (what to install, what to issue commands for) to make this happen without using a GUI if possible and if the GUI is easier I need to know which GUI to install.
I also do not have a problem with using a VPN router at the client side if that makes it any easier. Like a Cisco RV120W.
I can't print via our network printer (HP DeskJet 3650) which is connected to a WinXP PC on the network. My laptop is wireless connected to the network. My distribution is openSUSE 11.2 and I tried setting up the network printer via CUPS:
Went to http://localhost:631 Add Printer Device: Windows Printing via SAMBA Device URI: smb://UMBRELLA/SMOKE/HP3600 Make: HP Model: HP DeskJet 3650, hpcups 3.9.8 (en) Printer State: idle, accepting jobs, published.
Then clicked the "Print Test Page" button. At this point the printer actually starts making sounds.. the same sounds it makes when it's preparing to print something. But then, it stops. The printing job is still present in the printer queue at the WinXP PC, but it won't print.
So I looked at this documentation: [URL]
Step 2 from this documentation tells me to install a PPD file.. which I can't find anywhere. It's not on the original HP driver CD, neither can it be downloaded from this page: http://www.openprinting.org/show_pri...P-DeskJet_3650.
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I just installed my HP DeskJet 1220C printer on my CentOS 5.2 server, and it's working apart from one GIANT issue: It only prints from my Windows machines via its Samba share. It won't print from any of my Linux machines, not even the machine itself. I seem to be stumped here, I cannot find a reason why its doing this.
I did a net install for 5.3 x86_64 and for some reason it seems as though I don't have CUPS installed.
Computer: Dell AMD Server Version: CentOS 5.3 x86_64 (net install) server Primary Issue: There is no way to install a printer (seems as though CUPS is not installed) so System> Administration> and there is not Print or Printer option there Secondary Issue: After figuring out the printer issue, I need to install Apache, and SQLite3
I installed a 'Brother' laser printer on Debian. It works fine. Installation was fairly automatic. I now have another desktop computer using Vista Windows. How do I install the printer on my home network? Is there something I have to do with Debian? The Debian computer has a parallel port for my printer. The Vista computer does not have a parallel port; so I can only use the Debian computer.
I've never installed a network printer before and have no clue. I'm running Fedora 12, the printer is an ancient HP 2100TN. I'm linked directly to wall jacks in my building, have no clue about the router and have no access to it. I have no idea how to get Fedora to find this printer.
I am trying to print to a network printer from my 9.10 install. The printer is Canon_MF4360-4390, when browsing for printers, cups finds it immediately. I found drivers for this printer online (driver is called UFR_II_Printer_Driver_for_Linux_V200_uk_EN). The drivers installed without any problems.
I can go through cups and add the printer successfully. I can even print a test page that shows up in the queue as completed. However, nothing comes out of the printer. Also, there is nothing in /var/log/cups/error_log to show that an error has occurred.[URL]..
I have been trying to install a network printer with no success. I am using a laptop with Ubuntu and my printer is in a Windows-XP. I have installed samba and added the printer, but it always comes back asking for the authentication. I do not have in my Windows-XP accounts with password, if I use one of my users registered in Windows it does not reconizes it. If I use the user/pass of ubuntu it does not work.
