OpenSUSE :: Hp-setup Wont Setup HP Officejet?
Aug 18, 2011
With new installs of openSuse 11.4 I've hit a printer problem. I can run hp-setup (or hp-toolbox) for the wireless Officejet j6410 and it is recognised. The right driver is selected. Then when I choose add printer it all falls over with the error message: error: Printer queue setup failed. Could not connect to CUPS Server Is user added to "lp" group(s) error: Fax queue setup failed. Please restart CUPS and try again.
The user is added to the lp group. I have this problem with my 64 bit desktop and 32 bit laptop installs of 11.4, it all worked perfectly in 11.2. I've used the Cups web interface to set up the printer now and can print from both machines, but I would prefer to use the hp-toolbox, which has several convenient features. Where do I go from here?
View 5 Replies
ADVERTISEMENT
Sep 13, 2010
I've just set up the printer, with drivers, etc..., but I also need to set up the fax for future use. Just wondering how to do that: There's no option for fax in System --> Administration --> Printing
View 5 Replies
View Related
Feb 4, 2010
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
View 1 Replies
View Related
Mar 14, 2010
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies
View Related
Apr 27, 2011
i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
View 2 Replies
View Related
Dec 15, 2010
So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....
View 1 Replies
View Related
Apr 24, 2011
I want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies
View Related
Jun 4, 2010
I've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.
This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....
View 2 Replies
View Related
Jul 8, 2010
Im trying to set up my workflow to a terminal-based setup, so that accessing my computer through SSH will provide many of the things I need and use right off the bat. I have Mutt working great with my GMail account, so that's good. I do have a question though. Using the application Calcurse (featured on Lifehacker a few days ago, [URL] I am at a loss to figure out how to interface with Google Calendar. Is there a trick that Im missing, or does anyone know of another terminal app that plays better with Google Calendar?
Also, I was looking for a 'Digital Clock', essentially, again, a terminal/text based large print clock; similar to the one in the lower left corner on the attached pic. I was looking for a telnet server from the Atomic Clock, but no such luck so far.....
View 9 Replies
View Related
May 5, 2009
Here is a thought experiment:
1. Copy vmlinuz and initrd.img from isolinux subdir into /boot
2. Adjust grub.conf to boot to that kernel
3. Reboot to setup
4. Format /boot (actually '/' ) during "fresh install"
5. Proceed with the installation-over-network
I see two possible outcomes:
1. The setup fails to reformat the drive, because it is "in use" by boot kernel
2. The partition is not "in use" and the installation succeeds
Why? Old cluster with broken CD-drives, lacking USB, and no separate /boot partition.
View 2 Replies
View Related
Oct 8, 2010
I am trying to setup a 5 monitors setup using 3 cards, but I am stuck at 3 monitors for now. The third card is not plugged yet, so the current setup is:
NVIDIA 8800GT (binary driver 195.***)
--->1680x1050 LCD (VGA)
--->1680x1050 LCD (DVI)
ATI HD5450 (3 output, but I think the OSS driver only support 2, corrdct me if I am wrong) (OSS driver)
--->1280x1024 LCD (DVI)
---> 1366x768 TV (VGA)
[Code]...
View 2 Replies
View Related
Feb 18, 2010
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
View 4 Replies
View Related
Mar 31, 2010
I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
View 2 Replies
View Related
Jan 24, 2010
I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
View 3 Replies
View Related
Jul 5, 2011
I'm trying to use the set application to configure Apache. I'm getting a "setup: command not found" error when I type in "setup" at the command line.
However when I try to install setup with yum, it tells me that setup is already installed.
I'm logged in as root. CentOS 5.5.
View 2 Replies
View Related
Jan 19, 2010
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
View 3 Replies
View Related
Aug 9, 2010
I installed the latest version...Everything works like a charm. I have Windows Home Server 2003 running and would like to access all of my folders. How can i setup OPENSUSE to find/access my Windows Home Server 2003. Can you help me with this. Just to let you know. Am i missing something so i can access them locally.
View 1 Replies
View Related
Mar 14, 2010
I have been using 11.2 for a few days now and have noticed a few things that are different from 11.0 and was wondering if there is anything I can do to change them to my liking.When I want to install software thru Yast>software>Software Management I can install the software I choose OK, but it does not ask if I wish to install more software when it is done. The Yast control center stays open, but the Software Management window closes.I must reopen Software Management to do more.It is a small problem, yes, but annoying to me.Is there anyway to set it up so that it will ask if I wish to install more?
View 2 Replies
View Related
Mar 23, 2010
I just recently installed SUSE onto my computer because I'm sick of Windows crashing frequently.
Now I'm trying to setup my hardware, seems like everything is fine except for my graphics card.
I have an NVIDIA Quadro FX 540, and I'd downloaded the suitable driver from their site.
However, upon installation, I received some kind of error that mentioned it can't find my kernel.h or something like that. Someone said I would need the kernel source to proceed.
What is the best way for me to set this up?
Here is my system info when uname -a is ran: Linux namid 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64x86_64 GNU/Linux
View 7 Replies
View Related
Apr 14, 2010
I'm using gnome 2.28 on opensuse_x86_64 on hp dv9000. Cannot remember (last time I used this was 10.3 w/KDE) how to remove icons, etc. so that each workspace (I use defualt 4 each) has a different "set-up" IOW I don't want default icons and such on each workspace, but don't see a means to do this in gnome-control.
View 2 Replies
View Related
Nov 7, 2010
I've never really bothered about installing themes etc., to KDE and I've always just used the standard KDE setup so I am a bit of a newbie when it comes themes. But I was out the other day with a mate and he had got his Macbook and I quite liked the Bottom of the screen quick launch bar they have. Is there a program or widget I can install to KDE 4.4.4. So I can have a Mac style quick launch bar? And hopefully something that wont use to many system resources.
View 3 Replies
View Related
Dec 11, 2010
i want to setup a mysql server, however,,there are no mysql packages version 5.1.53 in the opensuse 11.3 repo's even not phpmyadmin where can i find mysql, mysql-client, mysql-community-server for version 5.1.53?
View 6 Replies
View Related
Dec 17, 2010
i am tring to setup SAMBA with webmin. the problem im having is that i can not login to the shared areas like homes and users. i can see them when i search my network i double click on them and it asks for user name and password. i have already set up a user using the convert unix user to samba user and have set a password. i have set teh Use encrypted passwords? to yes. when i try and log in it say login unsuccesful login or password my be incorect.
setting up SAMBA with webmin? Samba Configuration: i fould this one but didnt help. in uesing suse 11.3 and windows vista
View 5 Replies
View Related
May 31, 2010
i have the hp integrated module for bluetooth, and the bluez package installed, but the only way i discovered to activate it is from konsole, with some issues:
1-how can i start the bluetooth by graphical way?
2-kbluetooth4 says my device don't have a input support, so i can't connect them unless i try to send something notebook>device (the otherwise isn't allowed)
3-since i have full functionality at w7, how can i setup bluetooth beyond these problems to achieve the same?
View 8 Replies
View Related
Jan 16, 2011
What is an smart setup of an ocz-ssd 120GB, so that mathematica 8 speeds up?
OS: OpenSuse 11.3 64Bit (Dualboot with XP 64)
RAM: 8 GB
AMD X4 3.4 GHrz
HHD: 2 TB
SSD: 120 GB
App: Mathematica 8 and Databases
GPU: 36 Shader 512 MB
What partitions are useful?
SWAP: 60GB
TMP: 20GB
APP: 20GB
DB-Indices: 20GB
Which file-format performs the best? Do I need any OCZ specific driver for Opensuse 11.3?
How can use the Swap and tmp Partion also to spee up XP?
View 2 Replies
View Related
Aug 9, 2011
monitor connectedbut whene to watch movie i connect my TV using HDMI cable.when i was using windows i could setupnd it would stay theat way but not in linux.Issue/RequestRequest: i want to see on my TV an empty Desktop.'m able to configure it all in ATI Catalyst.BUT)Issue : after restart or after i disconnect HDMI cable confugurations wont save. well i would be able to live with it, but to get an empty desktop on my TV i have to shoose multi-desktop, but to activate it i have to restart my PC again.
View 9 Replies
View Related
May 7, 2011
i've just setup a vps server with 11.4 everything is almost look fine now, but i couldn't setup a nameserver, i've searched on the internet about that but directories is different in suse. anyway i registered a domain on onlinenic yesterday and i want to use this domain as a nameserver and my hostname. how can i do that ? and do i need to have at least 2 ip for that ?
View 7 Replies
View Related
Apr 11, 2010
yesterday i set my thinkpad t43p up with open suse, but i need to install my wlan...
i can't find the 12key big no to connect to my DSL telephone connection...
View 3 Replies
View Related
Jul 10, 2010
I just installed Opensuse 11.2 today and I'm eager to start downloading and customizing, but I can't set up a network. I originally installed it with the GNOME desktop, and when I opened firefox i could only connect to [URL]... and [URL], other websites timed out, even if i got to them via search results or URL.
Now, I reinstalled using the KDE desktop because after a little thought I preferred it, but now I can't even connect to these search engines at all. I don't know how to configure the network! It's through the onboard ethernet port, ethernet cable direct to modem.
View 2 Replies
View Related
Jun 25, 2009
I have a printer/scanner/fax that's on the network. i have the printer part set up through cups but how do I set up the scanner? What programs can I use on opensuse to see the scanner?
View 9 Replies
View Related
